Hello Dear Supporter
i have xiaomi mi 9t that only freez in mi logo, and can be go to fastboot
i disassemble it and flash by ufi android in edl mode
ths is my log:
what is my problem?
Firmware package: V10.3.3.0.Global
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM30)
Connection status: EHCI:HUB:HUB[#2]:USB 2.10 High-Speed
USB Driver: [Lenovo Inc.] leusbser, version: 2.0.9.6, date: 10-21-2014
Initializing...
MSM Serial number: 0x5593448d
MSM HW ID: 0x000e60e1 (SM7150), OEM ID: 0x0072 (Xiaomi), MODEL ID: 0x0000
OEM Public Key Hash: 1bebe3863a6781db4b01086063007334de9e5ca14971c7c4f4358ec9d79cda4692ce5e948c6fd409408f4c919fcadfe3
SBL SW version: 1
Firehose: prog_ufs_firehose_sdm855_ddr.elf
hash: c33637c24cf020e981cd05950359ea1f2d9f24c1, size: 656.50 KiB
oem version: c4-miui-ota-bd43.bj
qc version: BOOT.XF.3.1-00202-SM6150LZB-1
variant: SDM7150LA
Loading firehose... Done
Handshaking...
Sending ping... Done
INFO: Binary build date: Jun 21 2019 18:28:40
INFO: Chip serial num: 1435714701 (0x5593448d)
Sending configurations...
Requesting flash signature from server...
ERROR: Only nop and sig tag can be recevied before authentication.
[SERVER] XIAOMI_FL [davinci,5593448d] ref id: XF04924942386, cost: 5, your balance: 1
MemoryName: UFS
DateTime: Jun 21 2019 - 18:28:40
Version: 1
Firehose configured.
Storage type: UFS
Manufacturer ID: 0x1AD (SK Hynix)
Product name: H9HQ53AECMMDAR, fw_rev: 0x04, serial number: 0x796E6978
Storage id: SKhynix H9HQ53AECMMDAR 0004
Capacity: 59.60 GiB (63,996,690,432 bytes)
LUN 0: 58.38 GiB
LUN 1: 8 MiB
LUN 2: 8 MiB
LUN 3: 32 MiB
LUN 4: 1 GiB
LUN 5: 160 MiB
Processing LUN 0
Writing PrimaryGPT at 0x00000000 (6 sectors)... Done
Writing switch at 0x00006000 (2 sectors)... Done
Writing misc at 0x00400000 (1024 sectors)... Failed at addr 0x00400000
You have used 2 out of 10 slot for today.
You have used 1 available XIAOMI_FL slot for this phone, you have 2 try left to try again in case this task fails.
Please pay attention to the error messages and spesific hints before retry !!!
You are paying for authorization access and NOT the task, there is no refund for failed tasks and tasks with 3 retry
Refunds are only for failed tasks because of server issues, software issues or bugs and unknown problem with no retry !!!
We found that you have used XIAOMI_FL service with this phone at Thu, 26 Aug 2021 12:38:34 GMT.
Note that due to limited authorization slot, every authorization service will take cost.
Before using another authorization, please make sure the phone have a good working hardware and you are using the correct firmware.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable.
A USB communication error has occurred, please check your USB cable or try different USB port.
To save flashing slots, please identify with official firmware before flashing
Make sure the phone's battery has enough power(at least 50% for stable flashing)
In some case this might be a hardware problem, make sure PMIC, eMMC or UFS is in normal condition.
There is no refund for this case, you may retry after 1 hour
i have xiaomi mi 9t that only freez in mi logo, and can be go to fastboot
i disassemble it and flash by ufi android in edl mode
ths is my log:
what is my problem?
Firmware package: V10.3.3.0.Global
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM30)
Connection status: EHCI:HUB:HUB[#2]:USB 2.10 High-Speed
USB Driver: [Lenovo Inc.] leusbser, version: 2.0.9.6, date: 10-21-2014
Initializing...
MSM Serial number: 0x5593448d
MSM HW ID: 0x000e60e1 (SM7150), OEM ID: 0x0072 (Xiaomi), MODEL ID: 0x0000
OEM Public Key Hash: 1bebe3863a6781db4b01086063007334de9e5ca14971c7c4f4358ec9d79cda4692ce5e948c6fd409408f4c919fcadfe3
SBL SW version: 1
Firehose: prog_ufs_firehose_sdm855_ddr.elf
hash: c33637c24cf020e981cd05950359ea1f2d9f24c1, size: 656.50 KiB
oem version: c4-miui-ota-bd43.bj
qc version: BOOT.XF.3.1-00202-SM6150LZB-1
variant: SDM7150LA
Loading firehose... Done
Handshaking...
Sending ping... Done
INFO: Binary build date: Jun 21 2019 18:28:40
INFO: Chip serial num: 1435714701 (0x5593448d)
Sending configurations...
Requesting flash signature from server...
ERROR: Only nop and sig tag can be recevied before authentication.
[SERVER] XIAOMI_FL [davinci,5593448d] ref id: XF04924942386, cost: 5, your balance: 1
MemoryName: UFS
DateTime: Jun 21 2019 - 18:28:40
Version: 1
Firehose configured.
Storage type: UFS
Manufacturer ID: 0x1AD (SK Hynix)
Product name: H9HQ53AECMMDAR, fw_rev: 0x04, serial number: 0x796E6978
Storage id: SKhynix H9HQ53AECMMDAR 0004
Capacity: 59.60 GiB (63,996,690,432 bytes)
LUN 0: 58.38 GiB
LUN 1: 8 MiB
LUN 2: 8 MiB
LUN 3: 32 MiB
LUN 4: 1 GiB
LUN 5: 160 MiB
Processing LUN 0
Writing PrimaryGPT at 0x00000000 (6 sectors)... Done
Writing switch at 0x00006000 (2 sectors)... Done
Writing misc at 0x00400000 (1024 sectors)... Failed at addr 0x00400000
You have used 2 out of 10 slot for today.
You have used 1 available XIAOMI_FL slot for this phone, you have 2 try left to try again in case this task fails.
Please pay attention to the error messages and spesific hints before retry !!!
You are paying for authorization access and NOT the task, there is no refund for failed tasks and tasks with 3 retry
Refunds are only for failed tasks because of server issues, software issues or bugs and unknown problem with no retry !!!
We found that you have used XIAOMI_FL service with this phone at Thu, 26 Aug 2021 12:38:34 GMT.
Note that due to limited authorization slot, every authorization service will take cost.
Before using another authorization, please make sure the phone have a good working hardware and you are using the correct firmware.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable.
A USB communication error has occurred, please check your USB cable or try different USB port.
To save flashing slots, please identify with official firmware before flashing
Make sure the phone's battery has enough power(at least 50% for stable flashing)
In some case this might be a hardware problem, make sure PMIC, eMMC or UFS is in normal condition.
There is no refund for this case, you may retry after 1 hour
