Selected model: TCL Mediatek
Operation: Unlock network
Software version: 7.9
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM15 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM15 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xD90DA2D9, 0xF92EE3E8, 0x38D3F24B, 0x489E9AFC
Get Chip ID... [MT6761]
Get SOC ID... [64544F797D97D83BF9A2856B2C001C8F0761016BC2A06683E1DEE492BDC5EB96]
Get sec config... OK [000000E0]
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xEA2D0053483633313110E20017B25AAD
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: SH6311
EMMC_ID : 0xEA2D0053483633313110E20017B25AAD
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0748000000 (29.13Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : T431A
Product Name : T431A
Product Device : Rio
Product Board : MT6761
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Wed Mar 29 17:24:25 CST 2023
Display ID : SP1A.210812.016 release-keys
Security Patch : 2023-02-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : KW2Y
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read OTP... OK
Unlock... OK [DF1, DF2, SM]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
Operation: Unlock network
Software version: 7.9
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM15 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM15 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xD90DA2D9, 0xF92EE3E8, 0x38D3F24B, 0x489E9AFC
Get Chip ID... [MT6761]
Get SOC ID... [64544F797D97D83BF9A2856B2C001C8F0761016BC2A06683E1DEE492BDC5EB96]
Get sec config... OK [000000E0]
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xEA2D0053483633313110E20017B25AAD
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: SH6311
EMMC_ID : 0xEA2D0053483633313110E20017B25AAD
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0748000000 (29.13Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : TCL
Product Model : T431A
Product Name : T431A
Product Device : Rio
Product Board : MT6761
Board Platform : mt6761
Build ID : SP1A.210812.016
Build Date : Wed Mar 29 17:24:25 CST 2023
Display ID : SP1A.210812.016 release-keys
Security Patch : 2023-02-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : KW2Y
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security partition from phone...
Decrypting security data... OK
Encrypt security data... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read OTP... OK
Unlock... OK [DF1, DF2, SM]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!