Selected model: Vivo PD2066 (Vivo Y20G)
Operation: Read Flash Info
Software version: 7.10
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V2023 (Android),usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM49 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x61971641, 0x0CAEDFE6, 0x9DB1B778, 0x79D15BB7
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC9aP3
EMMC_ID : 0x90014A68433961503301101ADA494849
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: info not available
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2026
Product Name : 2026
Product Device : 2026
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : RP1A.200720.012
Build Date : Mon Oct 21 18:12:11 CST 2024
Display ID : RP1A.200720.012 release-keys
Security Patch : 2023-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20241021.181531
Userdata FS Type : EXT4
Read Flash Info done!
Selected model: Vivo PD2066 (Vivo Y20G)
Operation: Erase FRP And Wipe
Software version: 7.10
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V2023 (Android),usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM49 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x61971641, 0x0CAEDFE6, 0x9DB1B778, 0x79D15BB7
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC9aP3
EMMC_ID : 0x90014A68433961503301101ADA494849
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: info not available
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2026
Product Name : 2026
Product Device : 2026
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : RP1A.200720.012
Build Date : Mon Oct 21 18:12:11 CST 2024
Display ID : RP1A.200720.012 release-keys
Security Patch : 2023-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20241021.181531
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD2066%20(Vivo%20Y20G)/FRP_BACKUP_(2025-1-5_15-5-20)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!
Operation: Read Flash Info
Software version: 7.10
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V2023 (Android),usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM49 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x61971641, 0x0CAEDFE6, 0x9DB1B778, 0x79D15BB7
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC9aP3
EMMC_ID : 0x90014A68433961503301101ADA494849
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: info not available
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2026
Product Name : 2026
Product Device : 2026
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : RP1A.200720.012
Build Date : Mon Oct 21 18:12:11 CST 2024
Display ID : RP1A.200720.012 release-keys
Security Patch : 2023-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20241021.181531
Userdata FS Type : EXT4
Read Flash Info done!
Selected model: Vivo PD2066 (Vivo Y20G)
Operation: Erase FRP And Wipe
Software version: 7.10
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V2023 (Android),usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM49 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x61971641, 0x0CAEDFE6, 0x9DB1B778, 0x79D15BB7
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC9aP3
EMMC_ID : 0x90014A68433961503301101ADA494849
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: info not available
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2026
Product Name : 2026
Product Device : 2026
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : RP1A.200720.012
Build Date : Mon Oct 21 18:12:11 CST 2024
Display ID : RP1A.200720.012 release-keys
Security Patch : 2023-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20241021.181531
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD2066%20(Vivo%20Y20G)/FRP_BACKUP_(2025-1-5_15-5-20)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Formatting "md_udc" partition... OK
Wipe data done!