INFO
READ FF
Code:
Action : Boot Info.
Selected 0-By CPU:ELBRUS
Exe version: NCKDongle AndroidMTK 2.5.9.0
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6752
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (233Gb+16384Mb) SAMSUNG 0x523231424d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100523231424D42 : 00000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM26)
-Reading GPT Drive OK
This phone have FRP partition.
Build ID: LRX21M
Display ID: S1a40_S143_151222_ROW
Version: 5.0
Build Date: Tue Dec 22 09:09:56 CST 2015
Model: Lenovo S1a40
Brand: Lenovo
Device: S1a40
Region: US
Mediatek Version Release: ALPS.L0.MP6.V3_LENOVO6752.LWT.L_P261
Sw Internal Version: S1a40_USR_S143_1512220854_MP6.V3_LENOVO6752_ROW
IMEI[1]: 867267027925491
IMEI[2]: 867267027925509
Wait untill phone will start charging.
All done.
READ FF
Code:
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM Port (COM10)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6752
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB DRAM
----------------------------------------------------
EMMC: (233Gb+16384Mb) SAMSUNG 0x523231424d42
EMMC FW VERSION: 06:00:00:00:00:00:00:00
EMMC CID: 150100523231424D42 : 00000000000000
EMMC UA SIZE: 0x747c00000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x748800000 [29.133 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM Port (COM26)
-Reading GPT Drive OK
Build ID: LRX21M
Display ID: S1a40_S143_151222_ROW
Version: 5.0
Build Date: Tue Dec 22 09:09:56 CST 2015
Model: Lenovo S1a40
Brand: Lenovo
Device: S1a40
Manufacturer: LENOVO
Region: US
Mediatek Version Release: ALPS.L0.MP6.V3_LENOVO6752.LWT.L_P261
Sw Internal Version: S1a40_USR_S143_1512220854_MP6.V3_LENOVO6752_ROW
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start processing proinfo
Reading: BEGIN: 0x80000 - LEN: 0x300000
Start processing nvram
IMEI[1] from NVRAM: 867267027925491
IMEI[2] from NVRAM: 867267027925509
Start processing protect1 ......
Reading: BEGIN: 0x880000 - LEN: 0xa00000
Start processing protect2 ......
Reading: BEGIN: 0x1280000 - LEN: 0xa00000
Start processing persist ......
Reading: BEGIN: 0x1c80000 - LEN: 0x3000000
Start processing lk ......
Start processing boot
Start processing recovery
Start processing secro
Reading: BEGIN: 0x6d20000 - LEN: 0x600000
Start processing logo ......
Start processing trustzone
Start processing frp ......
Reading: BEGIN: 0xafa0000 - LEN: 0x800000
Start processing preload ......
Reading: BEGIN: 0xb7a0000 - LEN: 0x20060000
Start processing system
Reading: BEGIN: 0x2b800000 - LEN: 0xa0000000
Saved to : C:\Users\test\Desktop\TEMP\Android_MTK\firmware_backup\MT6752_EMMC_Lenovo_Lenovo S1a40_5_0_ALPS_L0_MP6_V3_LENOVO6752_LWT_L_P261(2018_07_22_23_26)
Wait untill phone will start charging.
All done.