DTPro VESTEL venüs e3 frp reset perfect

DTPro Tool

quantum

Active Member
Oct 13, 2020
85
4
izmir
13.07.2023 20:47:25 - Connecting to server:
13.07.2023 20:47:25 - Installing LibUsb Drivers..
13.07.2023 20:47:25 - Info : Connect phone to USB in BROM mode
13.07.2023 20:47:26 - BROM Mode : Please, power phone OFF, press and hold "Vol" button and connect USB cable.
13.07.2023 20:47:26 - Searching for a phone. Please wait...
13.07.2023 20:47:34 - Mode : [BootRom] COM3 - MediaTek USB Port (COM3)
13.07.2023 20:47:34 - Drivers : MediaTek Inc.,usb2ser.sys [1-22-2016] [3.2.0.0]
13.07.2023 20:47:34 - Port - Device detected :)
Preloader - CPU: MT6737M()
Preloader - HW version: 0x0
Preloader - WDT: 0x10212000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10217c00
Preloader - Var1: 0x28
Preloader - Disabling Watchdog...
Preloader - HW code: 0x335

13.07.2023 20:47:35 - Preloader - Target config: 0x0
Preloader - SBC enabled: False
Preloader - SLA enabled: False
Preloader - DAA enabled: False
Preloader - SWJTAG enabled: False
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: False
Preloader - Mem write auth: False
Preloader - Cmd 0xC8 blocked: False
Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca00
Preloader - SW Ver: 0x0
Preloader - ME_ID: 1FE69DB96308C6856F8E30EB4480A58A
Main - Device is unprotected.
DTpro - Loading payload from mt6737_payload.bin, 0x258 bytes
DTpro - Authorization / Service
Kamakiri - Writing Keys...

13.07.2023 20:47:35 - Error : Failed to Open Port..
13.07.2023 20:47:35 - Done..
13.07.2023 20:47:36 - Kamakiri - Authorizing the device Ok...

13.07.2023 20:47:36 - DTpro - Successfully sent payload: C:\Users\bio hazard\Desktop\DT PRO TOOL\Mediatek _v5.0.0.000(Nobody)DRAM\File\mtkclient\payloads\mt6737_payload.bin
Port - Device detected :)
Main
Main - [LIB]: [33mDevice is in BROM mode. No preloader given, trying to dump preloader from ram.[0m

13.07.2023 20:47:37 - Successfully extracted preloader for this device to: C:\Users\bio hazard\Desktop\DT PRO TOOL\Mediatek _v5.0.0.000(Nobody)DRAM\File\mtkclient\Loader\Preloader\preloader_a7188.bin
DALegacy - Uploading da...
DALegacy - Uploading stage 1...

13.07.2023 20:47:41 - Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.
DALegacy - Got loader sync !
DALegacy - Reading nand info

13.07.2023 20:47:41 - DALegacy - Reading emmc info

13.07.2023 20:47:41 - DALegacy - DRAM config needed for : 510001154d33314517f30d42ad3ae8d8
DALegacy - Reading nand info ...
DALegacy - Sending dram info ...

13.07.2023 20:47:42 - DALegacy - Uploading stage 2...

13.07.2023 20:47:43 - DALegacy - Successfully uploaded stage 2

13.07.2023 20:47:44 - DALegacy - Reconnecting to preloader

13.07.2023 20:47:46 - DALegacy - Connected to preloader
DALegacy - m_emmc_ret: 0x0
DALegacy - m_emmc_boot1_size: 0x400000
DALegacy - m_emmc_boot2_size: 0x400000
DALegacy - m_emmc_rpmb_size: 0x400000
DALegacy - m_emmc_gp_size: 0x0
DALegacy - m_emmc_ua_size: 0x3a3e00000
DALegacy - m_emmc_cid: 0x510001154d333145
DALegacy - m_emmc_fwver: 0xd
DALegacy - object_size: 0x1c
DALegacy - m_sdmmc_info: 0xc4f
DALegacy - m_sdmmc_ua_size: 0x0
DALegacy - m_sdmmc_cid: 0x0
DALegacy - m_int_sram_ret: 0x0
DALegacy - m_int_sram_size: 0x20000
DALegacy - m_ext_ram_ret: 0x0
DALegacy - m_ext_ram_type: 0x2
DALegacy - m_ext_ram_chip_select: 0x0
DALegacy - m_ext_ram_size: 0x80000000
DALegacy - randomid: 0xf437d712d8f83a76
DALegacy - object_size: 0x26

13.07.2023 20:47:49 - Wiped sector 217088 with sector count 2048.

13.07.2023 20:47:49 - Frp lock Zone formated | Frp erase done!
 
Top