UMT UMTv2/UMTPro UltiamteMTK2 v0.3 - Redmi 10A Patch Cert and more...

[GsmToto]

UMTv2 / UMT Pro
UltimateMTK2 v0.3
The Ultimate MediaTek Tool

Please login to view image

What's New:





Updated Oppo/Realme IMEI Repair

- Now it may work on erase security devices also

- In case of bootloop, try to flash same or lower version firmware

- Now user has option to choose if backup is needed or not

- Skip backup only if you already have full backup



Added Xiaomi Cert Patch for Redmi 10A

- If repair does not work, use Patch and then repair again

- Should work fine even on fully erased security

- You must first Unlock Bootloader for this function



Updated Mi Account Reset

- Improved Mi Account Reset Function

- Now you will asked for Safe Format with Account Reset



Updated Scatter Flashing

- Now multi super files flash correctly with extracted ofp firmware



Updated Crash Preloader Function

- Now it should work better than before

- Please note that it will not work on new security devices

- You must use TestPoint to new security devices



Added Format NVRAM+NVDATA option

- Usefull if device has unknown baseband



Added Safe Format+FRP option



Fixed Some Connection Issues



Fixed Preloader Error in flashing if firmware folder had not preloader in it



Fixed Copy Selected in Log Context Menu









Important Notes:

- You can flash device with both BROM and Preloader mode

- If default DA does not work, use own DA in custom DA

- Force BROM may not work on new security, use Test Point instead

- When using Test Point, you must select Preloader in PL (not needed when flashing)

- If you need to connect device in Preloader mode,

you must select PRELOADER in connection settings, otherwise software will try to

Crash Preloader (may not work on new security devices)







Note : Some features are device/OS specific and may not work on all devices.







THIS IS INITIAL RELEASE OF THIS NEW MODULE. SOMETHING MAY NOT WORK AS EXPECTED. PLEASE REPORT ISSUES WITH DETAILS SO WE CAN MAKE IT BETTER ON NEXT RELEASE.







WARNING :

ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.



ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.



WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.









Download using Support Access or Mirrors





Official Website

 

[kundicom]

good working add more device and latest security bootloader unlocking and patch

 

[ik rathod]

gr8

 

[.::Greed::.]

Good update

 

[malik ji]

Nice

 

[TorCaesar]

please give us vivo new security update in 2023

 

[Softgsm]

please give us vivo new security update in 2023

Hello

 

[sumanc]

Now we can use 0.3 and 5.1set-up separately, Thanks in advance

 

[TorCaesar]

Hello

yes sir what do you wanna say

 

[Kendream99]

UMTv2 / UMT Pro
UltimateMTK2 v0.3
The Ultimate MediaTek Tool

Please login to view image

What's New:





Updated Oppo/Realme IMEI Repair

- Now it may work on erase security devices also

- In case of bootloop, try to flash same or lower version firmware

- Now user has option to choose if backup is needed or not

- Skip backup only if you already have full backup



Added Xiaomi Cert Patch for Redmi 10A

- If repair does not work, use Patch and then repair again

- Should work fine even on fully erased security

- You must first Unlock Bootloader for this function



Updated Mi Account Reset

- Improved Mi Account Reset Function

- Now you will asked for Safe Format with Account Reset



Updated Scatter Flashing

- Now multi super files flash correctly with extracted ofp firmware



Updated Crash Preloader Function

- Now it should work better than before

- Please note that it will not work on new security devices

- You must use TestPoint to new security devices



Added Format NVRAM+NVDATA option

- Usefull if device has unknown baseband



Added Safe Format+FRP option



Fixed Some Connection Issues



Fixed Preloader Error in flashing if firmware folder had not preloader in it



Fixed Copy Selected in Log Context Menu









Important Notes:

- You can flash device with both BROM and Preloader mode

- If default DA does not work, use own DA in custom DA

- Force BROM may not work on new security, use Test Point instead

- When using Test Point, you must select Preloader in PL (not needed when flashing)

- If you need to connect device in Preloader mode,

you must select PRELOADER in connection settings, otherwise software will try to

Crash Preloader (may not work on new security devices)







Note : Some features are device/OS specific and may not work on all devices.







THIS IS INITIAL RELEASE OF THIS NEW MODULE. SOMETHING MAY NOT WORK AS EXPECTED. PLEASE REPORT ISSUES WITH DETAILS SO WE CAN MAKE IT BETTER ON NEXT RELEASE.







WARNING :

ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.



ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.



WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.









Download using Support Access or Mirrors





Official Website

Oppo imei repair keep rebooting

 

[phool]

pls google drive link

 

[Software Point]

 

[Software Point]

pls google drive link

 

[..::SADHAN::..]

Oppo F17 Pro​

Operation : Safe Format+FRP
Waiting for Device...Found
Port : MediaTek USB Port (COM18)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&3786cf87&0&2
#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Driver : MediaTek Inc., 3.2.0.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6779 [0725] Helio P90 k79v1
Details : 8A00,CA01,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 043632BA1D11DFA2C46CFC86EBF8D2BE
SoC ID[0] : 33AE2D635AA67AB229B2E1E9DA5B5007
SoC ID[1] : ECC31A69BDB582BE9FEDF51BB292568F
Running Exploit...
Installing LibUsb Filter Driver...OKDone
Downloading Preloader...OK
Saved as : preloader_k79v1_64.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : CE014B4D3856373030314A4D2D423831 [UFS]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x0000000000080000 [512.00 KB]
Ext. RAM : 0x0000000200000000 [8.00 GB]
Flash ID : KM8V7001JM-B81
CID : CE014B4D3856373030314A4D2D423831
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000001DCB000000 [119.17 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Formatting Userdata (Safe Mode)...OKOK
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v0.3]
Log Saved : 20230224_145202.log

 

[ShahbazKhanXTM]

UMTv2 / UMT Pro
UltimateMTK2 v0.3
The Ultimate MediaTek Tool

Please login to view image

What's New:





Updated Oppo/Realme IMEI Repair

- Now it may work on erase security devices also

- In case of bootloop, try to flash same or lower version firmware

- Now user has option to choose if backup is needed or not

- Skip backup only if you already have full backup



Added Xiaomi Cert Patch for Redmi 10A

- If repair does not work, use Patch and then repair again

- Should work fine even on fully erased security

- You must first Unlock Bootloader for this function



Updated Mi Account Reset

- Improved Mi Account Reset Function

- Now you will asked for Safe Format with Account Reset



Updated Scatter Flashing

- Now multi super files flash correctly with extracted ofp firmware



Updated Crash Preloader Function

- Now it should work better than before

- Please note that it will not work on new security devices

- You must use TestPoint to new security devices



Added Format NVRAM+NVDATA option

- Usefull if device has unknown baseband



Added Safe Format+FRP option



Fixed Some Connection Issues



Fixed Preloader Error in flashing if firmware folder had not preloader in it



Fixed Copy Selected in Log Context Menu









Important Notes:

- You can flash device with both BROM and Preloader mode

- If default DA does not work, use own DA in custom DA

- Force BROM may not work on new security, use Test Point instead

- When using Test Point, you must select Preloader in PL (not needed when flashing)

- If you need to connect device in Preloader mode,

you must select PRELOADER in connection settings, otherwise software will try to

Crash Preloader (may not work on new security devices)







Note : Some features are device/OS specific and may not work on all devices.







THIS IS INITIAL RELEASE OF THIS NEW MODULE. SOMETHING MAY NOT WORK AS EXPECTED. PLEASE REPORT ISSUES WITH DETAILS SO WE CAN MAKE IT BETTER ON NEXT RELEASE.







WARNING :

ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.



ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.



WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.









Download using Support Access or Mirrors





Official Website

Oppo A5s CPH1909 Not Supported yet..


Operation : IMEI Repair (Oppo Method)
Waiting for Device...Found
Port : MediaTek USB Port_V1633 (COM3)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&6d49e1f&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : 95F1C3465046E2E4FABFA846E865929F
SoC ID[0] : 8D3ECC2A243F135B82F2D9244F92F42A
SoC ID[1] : 8CFD062DDC4E4C1C5E341F58AE448271
Running Exploit...Done
Downloading Preloader...OK
Saved as : preloader_oppo6765_18511.bin
Loading EMI Config from Preloader...OK
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
Using DA : MTK_AllInOne_DA.bin
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100524836344142050CE4685A6695 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
Int. RAM : 0x000000000003A000 [232.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : RH64AB
CID : 150100524836344142050CE4685A6695
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
Connected to High-Speed DA Port
Reading Partition Table...OK
Manuf. : OPPO
Platform : mt6765
And. Ver. : 8.1.0
Ven. Date : Fri Mar 19 19:45:31 CST 2021
Locale : en-US
Patch : 2021-04-05
Reading Data...OK
IMEI1 : 86021700000000
IMEI2 : 86021700000000
Repairing Security..OK
Fixing Network Data...Not Found!
Possibly already patched.
Disabling Signature Check..Failed!/Ignored!
Operation Finished.
[UltimateMTK2 v0.3]

 

[mulia]

LINK NAME 03,LINK SETUP AFTER INSTALER 02.
Halooo....

 

[Shahzaibzah00r]

UMTv2 / UMT Pro
UltimateMTK2 v0.3
The Ultimate MediaTek Tool

Please login to view image

What's New:





Updated Oppo/Realme IMEI Repair

- Now it may work on erase security devices also

- In case of bootloop, try to flash same or lower version firmware

- Now user has option to choose if backup is needed or not

- Skip backup only if you already have full backup



Added Xiaomi Cert Patch for Redmi 10A

- If repair does not work, use Patch and then repair again

- Should work fine even on fully erased security

- You must first Unlock Bootloader for this function



Updated Mi Account Reset

- Improved Mi Account Reset Function

- Now you will asked for Safe Format with Account Reset



Updated Scatter Flashing

- Now multi super files flash correctly with extracted ofp firmware



Updated Crash Preloader Function

- Now it should work better than before

- Please note that it will not work on new security devices

- You must use TestPoint to new security devices



Added Format NVRAM+NVDATA option

- Usefull if device has unknown baseband



Added Safe Format+FRP option



Fixed Some Connection Issues



Fixed Preloader Error in flashing if firmware folder had not preloader in it



Fixed Copy Selected in Log Context Menu









Important Notes:

- You can flash device with both BROM and Preloader mode

- If default DA does not work, use own DA in custom DA

- Force BROM may not work on new security, use Test Point instead

- When using Test Point, you must select Preloader in PL (not needed when flashing)

- If you need to connect device in Preloader mode,

you must select PRELOADER in connection settings, otherwise software will try to

Crash Preloader (may not work on new security devices)







Note : Some features are device/OS specific and may not work on all devices.







THIS IS INITIAL RELEASE OF THIS NEW MODULE. SOMETHING MAY NOT WORK AS EXPECTED. PLEASE REPORT ISSUES WITH DETAILS SO WE CAN MAKE IT BETTER ON NEXT RELEASE.







WARNING :

ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.



ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.



WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.









Download using Support Access or Mirrors





Official Website

Please add imei repair in meta mode reboot to meta etc....

 

[Shahzaibzah00r]

UMTv2 / UMT Pro
UltimateMTK2 v0.3
The Ultimate MediaTek Tool

Please login to view image

What's New:





Updated Oppo/Realme IMEI Repair

- Now it may work on erase security devices also

- In case of bootloop, try to flash same or lower version firmware

- Now user has option to choose if backup is needed or not

- Skip backup only if you already have full backup



Added Xiaomi Cert Patch for Redmi 10A

- If repair does not work, use Patch and then repair again

- Should work fine even on fully erased security

- You must first Unlock Bootloader for this function



Updated Mi Account Reset

- Improved Mi Account Reset Function

- Now you will asked for Safe Format with Account Reset



Updated Scatter Flashing

- Now multi super files flash correctly with extracted ofp firmware



Updated Crash Preloader Function

- Now it should work better than before

- Please note that it will not work on new security devices

- You must use TestPoint to new security devices



Added Format NVRAM+NVDATA option

- Usefull if device has unknown baseband



Added Safe Format+FRP option



Fixed Some Connection Issues



Fixed Preloader Error in flashing if firmware folder had not preloader in it



Fixed Copy Selected in Log Context Menu









Important Notes:

- You can flash device with both BROM and Preloader mode

- If default DA does not work, use own DA in custom DA

- Force BROM may not work on new security, use Test Point instead

- When using Test Point, you must select Preloader in PL (not needed when flashing)

- If you need to connect device in Preloader mode,

you must select PRELOADER in connection settings, otherwise software will try to

Crash Preloader (may not work on new security devices)







Note : Some features are device/OS specific and may not work on all devices.







THIS IS INITIAL RELEASE OF THIS NEW MODULE. SOMETHING MAY NOT WORK AS EXPECTED. PLEASE REPORT ISSUES WITH DETAILS SO WE CAN MAKE IT BETTER ON NEXT RELEASE.







WARNING :

ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.



ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.



WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.









Download using Support Access or Mirrors





Official Website

Add patch cert for xiaomi phones and oppo dual imei repair like DFT pro

 

[Shahzaibzah00r]

UMTv2 / UMT Pro
UltimateMTK2 v0.3
The Ultimate MediaTek Tool

Please login to view image

What's New:





Updated Oppo/Realme IMEI Repair

- Now it may work on erase security devices also

- In case of bootloop, try to flash same or lower version firmware

- Now user has option to choose if backup is needed or not

- Skip backup only if you already have full backup



Added Xiaomi Cert Patch for Redmi 10A

- If repair does not work, use Patch and then repair again

- Should work fine even on fully erased security

- You must first Unlock Bootloader for this function



Updated Mi Account Reset

- Improved Mi Account Reset Function

- Now you will asked for Safe Format with Account Reset



Updated Scatter Flashing

- Now multi super files flash correctly with extracted ofp firmware



Updated Crash Preloader Function

- Now it should work better than before

- Please note that it will not work on new security devices

- You must use TestPoint to new security devices



Added Format NVRAM+NVDATA option

- Usefull if device has unknown baseband



Added Safe Format+FRP option



Fixed Some Connection Issues



Fixed Preloader Error in flashing if firmware folder had not preloader in it



Fixed Copy Selected in Log Context Menu









Important Notes:

- You can flash device with both BROM and Preloader mode

- If default DA does not work, use own DA in custom DA

- Force BROM may not work on new security, use Test Point instead

- When using Test Point, you must select Preloader in PL (not needed when flashing)

- If you need to connect device in Preloader mode,

you must select PRELOADER in connection settings, otherwise software will try to

Crash Preloader (may not work on new security devices)







Note : Some features are device/OS specific and may not work on all devices.







THIS IS INITIAL RELEASE OF THIS NEW MODULE. SOMETHING MAY NOT WORK AS EXPECTED. PLEASE REPORT ISSUES WITH DETAILS SO WE CAN MAKE IT BETTER ON NEXT RELEASE.







WARNING :

ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.



ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.



WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.









Download using Support Access or Mirrors





Official Website

Oppo A5s imei repair ok but in mobile still NULL where DFT pro repaired successfully plz fix this issue