TBK 988C 360° Rotation 7-inch LCD Screen Separator Machine Built-in Double Large Vacuum Pump
Buy at below link : TBK 988C 360° Rotation 7-inch LCD Screen Separator Machine Built-in Double Large Vacuum Pump - MartviewCLICK HERE
Features:
Can be tilted left and right, with 360-degree rotation for easy operation
Straight screen and curved screen are separated easily without pressure
The front screen and back cover are removable
Built-in dual large vacuum pumps and a new vacuum brake button
360 free rotation makes it easier to work, and the left and right tilt makes the alcohol infiltrate faster and quickly remove the screen
Large range worktables, small and large mobile phones can be placed at will, and the dimensions can be adjusted freely
There are different positioning of mobile phones on both sides of the worktable, which can be adjusted freely according to the size of the mobile phone
Super suction power solves the problem of screen movement when the straight screen or curved screen is separated
Replace the heating core for faster and more stable heating
Specification:
Brand: TBK
Product number: 988C
Operating Voltage: AC110V/220V
Power: 250W
Heating method: Constant temperature heating
Adapt to size: 7 inches below
Product size: 19*20*28cm
Package size: 24*32*19cm
Product Weight: 3.2kg
Gross weight: 3.5kg
Operation Steps:
Turn on the power: Insert the power cord into the power port on the back of the separator, and turn on the power switch
Preset temperature: Press the SET button to preset the temperature, press the up button to set the temperature at around 85 degrees, and press ENT to save
Prepare wire handle: Equipped with a wire handle to separate the screen
Place the silicone anti-skid pad: Place it on the panel of the separator, align the rubber pad with the panel hole, or do not use the silicone pad
Preparation for screen separation: Put the screen to be separated into the center of the panel, press the start button to start vacuum adsorption, and make sure that the screen is sucked
Start cutting screen: the screen can be preheated for 3-5 minutes to start cutting
After separating the burst screen, turn off the power of the separator. If it is dry glue, you can tear it off directly by hand(Watch out for burns!!!). If it is water glue, it needs to be removed with a blade and a glue removal liquid