Successfully Unlocked/Debranding phones with or w/Octopus Box Samsung (only here)!!

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsug G928t Network Repair Done

Code:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-G928T
Operation: Repair Network
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G928T
Firmware compiled date: Tue Aug  7 14:15:32 KST 2018
PDA version: G928TUVS6ERH1
CSC version: G928TTMB6ERH1
SW version: G928TUVS6ERH1
Phone SN: 00000000000
Android version: 7.0 (NRD90M)
Sales code: TMB
Country: USA
HW platform: exynos5
HW Chip: exynos7420
HW Modem: SHANNON333
Security patch level: 2018-08-01
Warranty Void: 1
SIM 1 status: ready
Codename: zenltetmo
Checking Root:
Phone is Rooted.
Initializing exploit...
Executing exploit...
Repairing network...
Network is already repaired!
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G935f Write Flash Done

Code:
Selected BOOT file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\BL_G935FXXS3ERHD_CL13895453
_QB19588583_REV00_user_low_ship.tar.md5
Selected AP file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\AP_G935FXXS3ERHD_CL13895453
_QB19588583_REV00_user_low_ship_meta.tar.md5
Selected CP file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\CP_G935FXXU3ERHC_CL878338
_QB10643114_SIGNED.tar.md5
Selected CSC file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\CSC_SEB_G935FSEB3ERG2
_CL13926005_QB19591230_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G386t Unlock Done

Code:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM844
Selected model: SM-G386T
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM846
Phone connection failed
Connecting to phone on COM847
Mode: Normal
Phone model: SM-G386T
Firmware compiled date: Jul 24 2014
Firmware compiled time: 05:00:00
Firmware released date: Aug  5 2014
Firmware released time: 16:43:38
Phone IMEI: 352829-06-373303-0
SW version: MPSS.DI.2.0.c8-00073-M8926DAAAANAZM-1
Performed by 2.7.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM847
Selected model: SM-G386T
Operation: Unlock
Reading info...
Mode: Normal
Firmware compiled date: Jul 24 2014
Firmware compiled time: 05:00:00
Firmware released date: Aug  5 2014
Firmware released time: 16:43:38
SW Version: MPSS.DI.2.0.c8-00073-M8926DAAAANAZM-1
Please, press "OK" button on the phone to allow USB debugging.
Warning: Selected model (SM-G386T) differs from the detected one
(SM-G386T1)!
If you want select (SM-G386T1) as (SM-G386T) model, please check
"manual select".
Unlocking phone...
Phone will restart now. Please don't disconnect cable!
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung A510f Write Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
-----------------------------------------------------------------------------------
To connect SGH-I747 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#7284#" number.
12. Set "UART" to "PDA" value.
13. Restart phone.
14. Press "Read Info" in software.
Selected AP file: E:\SAMSUNG\A510F 6.0\SM-A510F_1_
20180613194953_8139eivqfn\A510FXXU5CRF1_A510FEVR5CRF1
_A510FXXU5CRF1_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A510F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung J327p Write Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
Selected BOOT file: E:\SAMSUNG\J327P 6.0.1 OK\J327PVPS4ARF2_
6.0.1_4File_USA (Sprint)\J327PVPS4ARF2_6.0.1_4File_USA (Sprint)
\J327PVPS4ARF2_6.0.1_4File_USA (Sprint)\J327PVPS4ARF2_SPT
\BL_J327PVPS4ARF2_CL12677450_QB18458643_REV00
_user_low_ship_MULTI_CERT.tar.md5
Selected AP file: E:\SAMSUNG\J327P 6.0.1 OK\J327PVPS4ARF2_6.0.1_
4File_USA (Sprint)\J327PVPS4ARF2_6.0.1_4File_USA (Sprint)
\J327PVPS4ARF2_6.0.1_4File_USA (Sprint)\J327PVPS4ARF2_SPT
\AP_J327PVPS4ARF2_CL12677450_QB18458643_REV00
_user_low_ship_MULTI_CERT.tar.md5
Selected CP file: E:\SAMSUNG\J327P 6.0.1 OK\J327PVPS4ARF2_6.0.1_
4File_USA (Sprint)\J327PVPS4ARF2_6.0.1_4File_USA (Sprint)
\J327PVPS4ARF2_6.0.1_4File_USA (Sprint)\J327PVPS4ARF2_SPT
\CP_J327PVPS4ARF2_CL12677450_QB18458643_REV00
_user_low_ship_MULTI_CERT.tar.md5
Selected CSC file: E:\SAMSUNG\J327P 6.0.1 OK\J327PVPS4ARF2_
6.0.1_4File_USA (Sprint)\J327PVPS4ARF2_6.0.1_4File_USA (Sprint)
\J327PVPS4ARF2_6.0.1_4File_USA (Sprint)\J327PVPS4ARF2_SPT
\CSC_SPT_J327PSPT4ARF2_CL12677450_QB18458643_REV00
_user_low_ship_MULTI_CERT.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-J327P into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing DEVCFG section...
DEVCFG section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing CMNLIB section...
CMNLIB section has been written successfully.
Writing KEYMASTER section...
KEYMASTER section has been written successfully.
Writing LKSECAPP section...
LKSECAPP section has been written successfully.
Writing SEC section...
SEC section has been written successfully.
Writing APDP section...
APDP section has been written successfully.
Writing MDSAP section...
MDSAP section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing PERSIST section...
PERSIST section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing DSP section...
DSP section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G531f Wirte Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
Selected firmware file: G531FXXU1AOH1_G531FOXX1AOH1
_XEF_Android_5.1.1_2.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G531F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" +"Power"+''Home"  keys.
Found phone on
Advanced mode!
Firmware write started.
Writing SBOOT section...
SBOOT section has been written successfully.
Writing SBOOT2 section...
SBOOT2 section has been written successfully.
Writing LOKE2ND section...
LOKE2ND section has been written successfully.
Writing LOKE1ST section...
LOKE1ST section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung A720F Write Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
Selected BOOT file: C:\Users\test\Desktop\A720f\A720FXXU5CRH3
_BoxWares_8.0.0\BL_A720FXXU5CRH3_CL14226331_QB19448723
_REV00_user_low_ship.tar.md5
Selected AP file: C:\Users\test\Desktop\A720f\A720FXXU5CRH3
_BoxWares_8.0.0\AP_A720FXXU5CRH3_CL14226331_QB19448723
_REV00_user_low_ship_meta.tar.md5
Selected CP file: C:\Users\test\Desktop\A720f\A720FXXU5CRH3
_BoxWares_8.0.0\CP_A720FXXU5CRH3_CP10484969_CL14226331
_QB19448723_REV00_user_low_ship.tar.md5
Selected CSC file: C:\Users\test\Desktop\A720f\A720FXXU5CRH3
_BoxWares_8.0.0\CSC_OJV_A720FOJV5CRH3_CL14226331
_QB19451715_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A720F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G900 Write Flash Done

Code:
Selected AP file: E:\SAMSUNG\G900F 6.0.1\G900FXXU1CPD3
_G900FTTR1CPD2_MAX\G900FXXU1CPD3_G900FTTR1CPD2
_G900FXXU1CPCA_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G900F into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung J700t Write Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
-----------------------------------------------------------------------------------
To connect SM-J120A phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected AP file: E:\SAMSUNG\J700T 6.0.1 OK\SM-J700T_6.0.1_
20170607234700_yy889611v3\J700TUVS3AQF1_J700TTMB3AQF1
_J700TUVS3AQF1_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-J700T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung J727v Write Flash Done

Code:
Selected BOOT file: E:\SAMSUNG\J727v\J727VVRU1AQB1_7.0_
4File_USA (Verizon)\BL_J727VVRU1AQB1_CL10573392_QB12590249
_REV00_user_low_ship_MULTI_CERT.tar.md5
Selected AP file: E:\SAMSUNG\J727v\J727VVRU1AQB1_7.0_
4File_USA (Verizon)\AP_J727VVRU1AQB1_CL10573392
_QB12590249_REV00_user_low_ship_MULTI_CERT_meta.tar.md5
Selected CP file: E:\SAMSUNG\J727v\J727VVRU1AQB1_7.0_4File_USA
(Verizon)\CP_J727VVRU1AQB1_CL10573392_QB12590249_REV00
_user_low_ship_MULTI_CERT.tar.md5
Selected CSC file: E:\SAMSUNG\J727v\J727VVRU1AQB1_7.0_
4File_USA (Verizon)\CSC_VZW_J727VVZW1AQB1_CL10573392
_QB12590249_REV00_user_low_ship_MULTI_CERT.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-J727V into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing DEVCFG section...
DEVCFG section has been written successfully.
Writing CMNLIB section...
CMNLIB section has been written successfully.
Writing KEYMASTER section...
KEYMASTER section has been written successfully.
Writing APDP section...
APDP section has been written successfully.
Writing MSADP section...
MSADP section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing LKSECAPP section...
LKSECAPP section has been written successfully.
Writing SEC section...
SEC section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing PERSIST section...
PERSIST section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing DSP section...
DSP section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G386t Unlock Done

Code:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM847
Selected model: SM-G386T
Port is busy
Phone was not found on the selected port!
Searching for USB diagnostic port...
Connecting to phone on COM848
Mode: Normal
Phone model: SM-G386T
Firmware compiled date: Jul 24 2014
Firmware compiled time: 05:00:00
Firmware released date: Aug  5 2014
Firmware released time: 16:43:38
Phone IMEI: 352829-06-344034-7
SW version: MPSS.DI.2.0.c8-00073-M8926DAAAANAZM-1
Performed by 2.7.1 Software version.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM848
Selected model: SM-G386T
Operation: Unlock
Reading info...
Mode: Normal
Firmware compiled date: Jul 24 2014
Firmware compiled time: 05:00:00
Firmware released date: Aug  5 2014
Firmware released time: 16:43:38
SW Version: MPSS.DI.2.0.c8-00073-M8926DAAAANAZM-1
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Warning: Selected model (SM-G386T) differs from the detected one
(SM-G386T1)!
If you want select (SM-G386T1) as (SM-G386T) model, please check
"manual select".
Unlocking phone...
Phone will restart now. Please don't disconnect cable!
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu.
Performed by 2.7.1 Software version.
 

diesel6

Active Member
Nov 9, 2018
50
10
punjab(india)
Skype
diesel6255
Sonork ID
100.1654770
g935 w8 8.0 unloock done

Welcome to Octoplus Box Samsung software version 2.7.4
-----------------------------------------------------------------------------------
To connect SM-G935W8 phone you have to perform the following
steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM52
Selected model: SM-G935W8
Operation: Read Codes
Please, press "OK" button on the phone to allow USB debugging.
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-G935W8
Firmware compiled date: Tue Jul 17 14:50:47 KST 2018
PDA version: G935W8VLS3CRG2
CSC version: G935W8OYA3CRG2
SW version: G935W8VLS3CRG2
Phone SN: RF8H50V3PBM
Android version: 8.0.0 (R16NW)
Sales code: GLW
Country: Canada
HW platform: exynos5
HW Chip: exynos8890
HW Modem: SHANNON335
Security patch level: 2018-07-01
Warranty Void: 0
SIM 1 status: absent
Codename: hero2ltebmc
Checking Root:
Phone is Rooted.
Connecting to modem port...
Found phone on COM52
Reading data from phone...
Could not read data from modem port, trying with exploit..
Initializing exploit...
Phone will restart now. Please don't disconnect cable!
Searching for a phone. Please wait...
Phone found.
Executing exploit...
Exploit has been executed successfully
Reading phone unlock codes. This can take some time, please wait...
FREEZE unlock code: 28617180
NET LOCK unlock code: 82918351
SUB LOCK unlock code: 00000000
SP LOCK unlock code: 00000000
CP LOCK unlock code: 00000000
SIM LOCK unlock code: 00000000
Work time: 0:00:55
Performed by 2.7.4 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung A310f Write Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
Selected firmware file: A310FXXU4CRB1_A310FOXX4CRB1
_A310FXXU4CRB2_HOME.tar.md5
Selected AP file: G:\SAMSUNG\A310F 6.0\A310FXXU4CRB1
_A310FOXX4CRB1_A310FXXU4CRB2_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A310F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung E1205t Write Flash Done

Code:
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-E1205T
Selected port: COM9
Baud rate: 115200
Please, connect phone to UART cable, insert battery and press power
button for 3 seconds.
Phone found.
Sending preloader...
Preloader send successfully
Reading flash memory parameters..
Setting baudrate..
Sending mainloader...
Mainloader send successfully
Writing firmware...
Writing CLA section...
Erasing block...
Block erase successfully.
Writing block...
CLA section has been written successfully.
Writing LPD section...
LPD section has been written successfully.
Formating TFS section
Section TFS format successfully
Writing TFS section...
TFS section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Firmware Write successfully.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung A310f Write Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
Selected AP file: G:\SAMSUNG\A310F 6.0\SM-A310F_1_
20180208115201_0za55dcuz5\A310FXXU4CRB1_A310FOXX4CRB1
_A310FXXU4CRB2_HOME.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-A310F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G935f Write Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
Selected BOOT file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\BL_G935FXXS3ERHD_CL13895453
_QB19588583_REV00_user_low_ship.tar.md5
Selected AP file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\AP_G935FXXS3ERHD_CL13895453
_QB19588583_REV00_user_low_ship_meta.tar.md5
Selected CP file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\CP_G935FXXU3ERHC_CL878338
_QB10643114_SIGNED.tar.md5
Selected CSC file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\CSC_SEB_G935FSEB3ERG2
_CL13926005_QB19591230_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CP_DEBUG section...
CP_DEBUG section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G935f FRP Remove Done

Code:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM125
Selected model: SM-G935F
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Checking operation...OK
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G935f Write Flash Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
To connect SM-G935F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Reading PIT...
PIT was read successfully.
Performed by 2.7.5 Software version.
Selected BOOT file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\BL_G935FXXS3ERHD_CL13895453
_QB19588583_REV00_user_low_ship.tar.md5
Selected AP file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\AP_G935FXXS3ERHD_CL13895453
_QB19588583_REV00_user_low_ship_meta.tar.md5
Selected CP file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\CP_G935FXXU3ERHC_CL878338
_QB10643114_SIGNED.tar.md5
Selected CSC file: E:\SAMSUNG\G935f 6.0 OK\SM-G935F_1_
20180903141140_1ix2r98bjt_fac\CSC_SEB_G935FSEB3ERG2
_CL13926005_QB19591230_REV00_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-G935F into Download Mode, You have to perform the
following steps:
1. Press and hold "Volume-" + "Home" + "Power ON" keys.
2. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Writing CP_DEBUG section...
CP_DEBUG section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung G920p FRP Remove Done

Code:
Welcome to Octoplus Box Samsung software version 2.7.5
-----------------------------------------------------------------------------------
To connect SM-G935F phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM125
Selected model: SM-G920P
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface.. COM8
Connect Samsung Micro UART cable(with 525K resistor), press and
hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Checking operation...OK
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.7.5 Software version.
 

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Samsung E1205t Write Flash Done


Code:
Platform: Samsung Swift
Selected model: GT-E1205T
Selected port: COM9
Baud rate: 115200
Please, connect phone to UART cable, insert battery and press power
button for 3 seconds.
Phone found.
Sending preloader...
Preloader send successfully
Reading flash memory parameters..
Setting baudrate..
Sending mainloader...
Mainloader send successfully
Writing firmware...
Writing CLA section...
Erasing block...
Block erase successfully.
Writing block...
CLA section has been written successfully.
Writing LPD section...
LPD section has been written successfully.
Formating TFS section
Section TFS format successfully
Writing TFS section...
TFS section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Firmware Write successfully.
Performed by 2.7.1 Software version.
 
Top