SUCCESSFULLY REMOVE FRP MOTOROLA E4 XT 1767 WITH CM2
LOGS
LOGS
Code:
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Main Info ============
CPU : MSM8917
CID : 0x0002
IMEI : 353308083109538
UID : 40E15FCB00000000000000000000
Model Info ============
DevModel : XT1767
IntName : perry
SW Info ============
DevSWVer : Blur_Version.26.251.6.perry_verizon.verizon.en.US
DevQCVer : LA.UM.5.6.r1-03800-89xx.0
BaseBand : M8917_16000.269.04.03.02R PERRY_NA_CUST
BootLDRv : moto-msm8917-BA.33
HW Info ============
eMMCInfo : 16GB SKHYNIX HAG4a2 RV=08 PV=A5 FV=00000000000000A5
DRAMInfo : 2GB SKHYNIX LP3 DIE=8Gb M5=06 M6=04 M7=00 M8=1F
Lock Info ============
WarrantyVoid : no
FRP Lock : protected (77)
Done!
Elapsed: 00:00:09
Operation : Moto ADB Enable [ v1.03 ]
Mode : Enable Factory
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Operation done!
-- > Info : Wait till device boot, make "Enable ADB" operation after
-- > Info : Don't forget DISABLE "FACTORY MODE" after make "RESET FRP"!
Done!
Elapsed: 00:00:07
Operation : Moto ADB Enable [ v1.03 ]
Mode : Enable ADB
Waiting for NetInterface arrival ...
1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!
Connect Ok!
Waiting ...
Trying link with : 192.168.137.2
Connected to device!
Device : XT1767
Switching to FACTORY ...
Setting Unsecure mode
Waiting device ...
Connect Ok!
Trying link with : 192.168.137.2
Connected to device!
Device : XT1767
Setting ADB ...
Waiting device ...
Connect Ok!
Trying link with : 192.168.137.2
Connected to device!
Device : XT1767
Setting ADB ...
1. Disconnect cable from device, wait device reboot
2. Make "Reset FRP"
3. Disable "FACTORY MODE" after operations done!
Done!
Elapsed: 00:01:11
Operation : Reset FRP (ADB) [ v1.03 ]
Waiting for device in ADB mode ...
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!
Connect Ok!
Device : perry_verizon_f
Model : Moto E (4)
FRP reset passed! Make FACTORY RESET from menu!
-- > MOTO FRP : Don't forget to DISABLE FACTORY MODE!
Done!
Elapsed: 00:00:15
Operation : Moto ADB Enable [ v1.03 ]
Mode : Disable Factory
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Operation done!
Done!
Elapsed: 00:00:15