SUCCESSFULLY FORMAT PLUS REMOVE FRP Q MOBILE I6I DONE WITH CM2
LOGS
LOGS
Code:
Selected FlashSettings : Manual
Check FlashFiles, Please, wait...
Files Set for Flashing :
MCU : rm924__04.12.mcusw
PPM : rm924__04.12.ppm_ma3
CNT : rm924__04.12.image_ma3_059T632
Flashing phone now...
[Gen] Rules accepted for : XGOLD Generation
Check files done...
-> Check SW version...
FlashFile version : 04.12
Phone version : 04.12 21-05-13 RM-924 (c) Nokia
-> Check SW version : Reflash
Check communication with phone....
ADL req restart
Communication verify done... Preparing...
Check communication with phone...
Reboot....
-> If Phone start charge - just reinsert battery fast
Connection opened successfully
IF Boot Init : 0xF0
IF Resp Len : 0x0A
IF xCPUID : XGOLD 213 [XMM2130 QUANTUM]
IF Resp Data : 1FB300020303010100FF
Sending EBL Loader ...
EBL Loader Ok, 01
EBL Loader ready, AA
Sending EBL ...
EBL sent Ok
EBL : Quantum_Bootloader_10.56_M1S1
Speed accepted, use 6.500.000
FLASHID : EC001230
FLIC conf set, RST set
Boot done!
Check keys...
Check done. Image can be flashed
Settings : EDM [0x8] , Block Mode , Fast CRC , Verify
===Flashing [MCU]===
File : rm924__04.12.mcusw
Image : rm924__04.12.mcusw_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 5 region(s)
Processing Region 1/5
Erase , Start : 0x40000000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40000000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 2/5
Erase , Start : 0x40040000 , Len : 0x00020000
Erasing, wait ...
Erase done, time : 00:00:00
Write , Start : 0x40040000 , Len : 0x00020000
Flashing , wait ...
Region flash done, time : 00:00:00
Processing Region 3/5
Erase , Start : 0x40060000 , Len : 0x00100000
Erasing, wait ...
Erase done, time : 00:00:02
Write , Start : 0x40060000 , Len : 0x00100000
Flashing , wait ...
Region flash done, time : 00:00:01
Processing Region 4/5
Erase , Start : 0x40280000 , Len : 0x01A40000
Erasing, wait ...
Erase done, time : 00:00:59
Write , Start : 0x40280000 , Len : 0x01A40000
Flashing , wait ...
Region flash done, time : 00:00:42
Processing Region 5/5
Erase , Start : 0x43E20000 , Len : 0x00040000
Erasing, wait ...
Erase done, time : 00:00:00
No write data, skip
CRC check passed , 0x7DFD
===Flashing [PPM]===
File : rm924__04.12.ppm_ma3
Image : package_ma3.ppm_ebl_psi.fls
Sec-pack found, sending ...
Sec-pack sent
Found 1 region(s)
Processing Region 1/1
Erase , Start : 0x41CC0000 , Len : 0x00640000
Erasing, wait ...
Erase done, time : 00:00:09
Write , Start : 0x41CC0000 , Len : 0x003EE5C4
Flashing , wait ...
Region flash done, time : 00:00:05
CRC check passed , 0x86E8
===Flashing [CNT]===
File : rm924__04.12.image_ma3_059T632
Image : package_ma3_059T632.image.fls
Sec-pack found, sending ...
Sec-pack sent
Found 2 region(s)
Processing Region 1/2
Erase , Start : 0x42300000 , Len : 0x01B20000
Erasing, wait ...
Erase done, time : 00:01:09
Write , Start : 0x42300000 , Len : 0x00C20000
Flashing , wait ...
Region flash done, time : 00:00:17
Processing Region 2/2
Erase , Start : 0x43E60000 , Len : 0x000E0000
Erasing, wait ...
Erase done, time : 00:00:02
No write data, skip
CRC check passed , 0xB2C0
Flashing done!
Total flash time : 00:03:31
Reboot phone now...
Reading Phone Info....
Connected phone - Nokia 210
Software Info: V 04.12 21-05-13 RM-924 (c) Nokia
IMEI: 357897055741522
PPM version : V 04.12 21-05-13 RM-924 (c) Nokia MA3
Product code: 059R775
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Processing After Flash Defaults...
Error When resetting FullFactory :( ...
Error When setting User Data defaults :( ...
Error When setting Service defaults :( ...
Error When setting Leave defaults :( ...
Error When resetting Product Tune :( ...
Error When resetting SW upgrade Default :( ...
AfterFlash operations done ;D
Done!
Connect phone on selected interface...
Elapsed: 00:09:13
Connect phone on selected interface...
Phone found!
Series 40 Device detected!
read info... - Ok
Resetting selected items...
Operating mode is OK, no need change...
Settings Full Factory Defaults...
Error When resetting Full factory :( ...
Settings Software Upgrade Defaults...
Set OK!
Settings Service Centre Defaults...
Set OK!
Settings Production Tune Defaults...
Set OK!
Settings User Data Defaults...
Set OK!
Settings Leave Factory defaults...
Set OK!
Elapsed: 00:00:01
Phone disconected!
Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok
Phone disconected!
Connect phone on selected interface...