Welcome to Octoplus Samsung Software v.4.0.5.0
Loading account information..
Your balance: 100 credit(s)
Work ID: 000000
Starting Repair Imei (Nov.2020)
Selected model: SM-J260F
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
Reading info...
Detected model: SM-J260F
Fingerprint: samsung/j2coreltecis/j2corelte:8.1.0/M1AJB/J260FXXS5ATA3:user/release-keys
Firmware compiled date: Wed Jan 8 19:21:52 KST 2020
PDA version: J260FXXS5ATA3
CSC version: J260FOJM5ATA1
SW version: J260FXXS5ATA1
Build number: QB14809736
Phone SN: RZ8M12R0PXK
Android version: 8.1.0 (M1AJB)
Sales code: XSG
Country: UAE
HW platform: exynos7570
HW Chip: exynos5
HW Modem: MP 0.500
Security patch level: 2020-01-01
Warranty Void: 1
Codename: j2coreltecis
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SHANNON305
This could be a special phone where root can be included in the recovery partition. This means that the phone must be started in recovery mode with a key combo or restarted in recovery mode via adb. If you are sure that your phone is rooted and want to restart in recovery mode, click "Yes"
Phone is not rooted
Repair Imei (Nov.2020) failed
Execution time 32 second(s)
Performed by 4.0.5.0 Software version.
Work ID: 000000
Starting Repair Imei (Nov.2020)
Selected model: SM-J260F
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
Reading info...
Detected model: SM-J260F
Fingerprint: samsung/j2coreltecis/j2corelte:8.1.0/M1AJB/J260FXXS5ATA3:user/release-keys
Firmware compiled date: Wed Jan 8 19:21:52 KST 2020
PDA version: J260FXXS5ATA3
CSC version: J260FOJM5ATA1
SW version: J260FXXS5ATA1
Build number: QB14809736
Phone SN: RZ8M12R0PXK
Android version: 8.1.0 (M1AJB)
Sales code: XSG
Country: UAE
HW platform: exynos7570
HW Chip: exynos5
HW Modem: MP 0.500
Security patch level: 2020-01-01
Warranty Void: 1
Codename: j2coreltecis
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SHANNON305
Checking network status...
Rebooting device...
Searching ADB devices...
Canceling... Please be patient!
Make sure that "USB Debug" option on the device is turned on
Repair Imei (Nov.2020) canceled
Execution time 1 minute(s) 5 second(s)
Performed by 4.0.5.0 Software version.
Work ID: 000000
Starting Write Firmware
Selected model: SM-J260F
Please disable KNOX (if it is activated) in order to avoid damage! Please, make sure the phone battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a "clean" PC (without any drivers installed for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during flashing!
Selected firmware files:
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/AP_J260FXXS5ATA3_CL15031630_QB28476900_REV01_user_low_ship_meta.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/BL_J260FXXS5ATA3_CL15031630_QB28476900_REV01_user_low_ship.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/CP_J260FXXS5ATA1_CP14809736_CL15031630_QB28365576_REV01_user_low_ship.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/CSC_OMC_OJM_J260FOJM5ATA1_CL16294654_QB28365648_REV00_user_low_ship.tar.md5
Connecting device in Download Mode...
Connected successfully to port: COM9
Communicated successfully!
Writing PIT section
Preparing to send PIT
Sending PIT in one package
Finalizing PIT write
PIT file sent successffully
Writing RECOVERY section...
File name: recovery.img.lz4
Section RECOVERY has been written successfully
Writing SYSTEM section...
File name: system.img.lz4
Section SYSTEM has been written successfully
Writing VENDOR section...
File name: vendor.img.lz4
Section VENDOR has been written successfully
Writing USERDATA section...
File name: userdata.img.lz4
Section USERDATA has been written successfully
Writing BOOTLOADER section...
File name: sboot.bin.lz4
Section BOOTLOADER has been written successfully
Writing PARAM section...
File name: param.bin.lz4
Section PARAM has been written successfully
Writing CM section...
File name: cm.bin.lz4
Section CM has been written successfully
Writing RADIO section...
File name: modem.bin.lz4
Section RADIO has been written successfully
Writing CACHE section...
File name: cache.img.lz4
Section CACHE has been written successfully
Writing ODM section...
File name: odm.img.lz4
Section ODM has been written successfully
Writing OMR section...
File name: omr.img.lz4
Section OMR has been written successfully
Writing HIDDEN section...
File name: hidden.img.lz4
Section HIDDEN has been written successfully
Finalizing write firmware. Restarting phone...
Write Firmware done
Execution time 2 minute(s) 36 second(s)
Performed by 4.0.5.0 Software version.
Work ID: 000000
Starting Write Firmware
Selected model: SM-J260F
Please disable KNOX (if it is activated) in order to avoid damage! Please, make sure the phone battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a "clean" PC (without any drivers installed for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during flashing!
Selected firmware files:
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/AP_J260FXXS5ATA3_CL15031630_QB28476900_REV01_user_low_ship_meta.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/BL_J260FXXS5ATA3_CL15031630_QB28476900_REV01_user_low_ship.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/CP_J260FXXS5ATA1_CP14809736_CL15031630_QB28365576_REV01_user_low_ship.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/CSC_OMC_OJM_J260FOJM5ATA1_CL16294654_QB28365648_REV00_user_low_ship.tar.md5
Connecting device in Download Mode...
Connected successfully to port: COM9
Communicated successfully!
Writing PIT section
Preparing to send PIT
Sending PIT in one package
Finalizing PIT write
PIT file sent successffully
Writing BOOT section...
File name: boot.img.lz4
Section BOOT has been written successfully
Writing RECOVERY section...
File name: recovery.img.lz4
Section RECOVERY has been written successfully
Writing SYSTEM section...
File name: system.img.lz4
Section SYSTEM has been written successfully
Writing VENDOR section...
File name: vendor.img.lz4
Section VENDOR has been written successfully
Writing USERDATA section...
File name: userdata.img.lz4
Section USERDATA has been written successfully
Writing BOOTLOADER section...
File name: sboot.bin.lz4
Section BOOTLOADER has been written successfully
Writing PARAM section...
File name: param.bin.lz4
Section PARAM has been written successfully
Writing CM section...
File name: cm.bin.lz4
Section CM has been written successfully
Writing RADIO section...
File name: modem.bin.lz4
Section RADIO has been written successfully
Writing CACHE section...
File name: cache.img.lz4
Section CACHE has been written successfully
Writing ODM section...
File name: odm.img.lz4
Section ODM has been written successfully
Writing OMR section...
File name: omr.img.lz4
Section OMR has been written successfully
Writing HIDDEN section...
File name: hidden.img.lz4
Section HIDDEN has been written successfully
Finalizing write firmware. Restarting phone...
Write Firmware done
Execution time 2 minute(s) 2 second(s)
Performed by 4.0.5.0 Software version.
Work ID: 0000000
Starting Repair Imei (Nov.2020)
Selected model: SM-J260F
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
Reading info...
Detected model: SM-J260F
Fingerprint: samsung/j2coreltecis/j2corelte:8.1.0/M1AJB/J260FXXS5ATA3:user/release-keys
Firmware compiled date: Wed Jan 8 19:21:52 KST 2020
PDA version: J260FXXS5ATA3
CSC version: J260FOJM5ATA1
SW version: J260FXXS5ATA1
Build number: QB14809736
Phone SN: RZ8M12R0PXK
Android version: 8.1.0 (M1AJB)
Sales code: XSG
Country: UAE
HW platform: exynos7570
HW Chip: exynos5
HW Modem: MP 0.500
Security patch level: 2020-01-01
Warranty Void: 1
Codename: j2coreltecis
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SHANNON305
Checking network status...
Rebooting device...
Searching ADB devices...
Connecting to server...
Username: tajmobile
Starting exploit...
Current IMEI A: 8600
Current IMEI B: 8600
Resetting MSL...
Repairing IMEI A...
New IMEI A: 3523
Repairing IMEI B...
New IMEI B: 352
Rebooting device...
Repair Imei (Nov.2020) done
Execution time 2 minute(s) 54 second(s)
Performed by 4.0.5.0 Software version.
Work ID: 00
Starting Repair Network (Nov.2020)
Selected model: SM-J260F
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
Reading info...
Detected model: SM-J260F
Fingerprint: samsung/j2coreltecis/j2corelte:8.1.0/M1AJB/J260FXXS5ATA3:user/release-keys
Firmware compiled date: Wed Jan 8 19:21:52 KST 2020
PDA version: J260FXXS5ATA3
CSC version: J260FOJM5ATA1
SW version: J260FXXS5ATA1
Build number: QB14809736
Phone SN: RZ8M12R0PXK
Android version: 8.1.0 (M1AJB)
Sales code: XSG
Country: UAE
HW platform: exynos7570
HW Chip: exynos5
HW Modem: MP 0.500
Security patch level: 2020-01-01
Warranty Void: 1
Codename: j2coreltecis
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SHANNON305
Checking network status...
Rebooting device...
Searching ADB devices...
Connecting to server...
Username: tajmobile
Rebooting device...
Do you want to start checking repair network status? It can take up to 10 minutes. Press "Yes" to start network status check, or "No" and check it manually by inserting sim card.
Repair Network (Nov.2020) done
Execution time 1 minute(s) 25 second(s)
Performed by 4.0.5.0 Software version.
Loading account information..
Your balance: 100 credit(s)
Work ID: 000000
Starting Repair Imei (Nov.2020)
Selected model: SM-J260F
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
Reading info...
Detected model: SM-J260F
Fingerprint: samsung/j2coreltecis/j2corelte:8.1.0/M1AJB/J260FXXS5ATA3:user/release-keys
Firmware compiled date: Wed Jan 8 19:21:52 KST 2020
PDA version: J260FXXS5ATA3
CSC version: J260FOJM5ATA1
SW version: J260FXXS5ATA1
Build number: QB14809736
Phone SN: RZ8M12R0PXK
Android version: 8.1.0 (M1AJB)
Sales code: XSG
Country: UAE
HW platform: exynos7570
HW Chip: exynos5
HW Modem: MP 0.500
Security patch level: 2020-01-01
Warranty Void: 1
Codename: j2coreltecis
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SHANNON305
This could be a special phone where root can be included in the recovery partition. This means that the phone must be started in recovery mode with a key combo or restarted in recovery mode via adb. If you are sure that your phone is rooted and want to restart in recovery mode, click "Yes"
Phone is not rooted
Repair Imei (Nov.2020) failed
Execution time 32 second(s)
Performed by 4.0.5.0 Software version.
Work ID: 000000
Starting Repair Imei (Nov.2020)
Selected model: SM-J260F
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
Reading info...
Detected model: SM-J260F
Fingerprint: samsung/j2coreltecis/j2corelte:8.1.0/M1AJB/J260FXXS5ATA3:user/release-keys
Firmware compiled date: Wed Jan 8 19:21:52 KST 2020
PDA version: J260FXXS5ATA3
CSC version: J260FOJM5ATA1
SW version: J260FXXS5ATA1
Build number: QB14809736
Phone SN: RZ8M12R0PXK
Android version: 8.1.0 (M1AJB)
Sales code: XSG
Country: UAE
HW platform: exynos7570
HW Chip: exynos5
HW Modem: MP 0.500
Security patch level: 2020-01-01
Warranty Void: 1
Codename: j2coreltecis
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SHANNON305
Checking network status...
Rebooting device...
Searching ADB devices...
Canceling... Please be patient!
Make sure that "USB Debug" option on the device is turned on
Repair Imei (Nov.2020) canceled
Execution time 1 minute(s) 5 second(s)
Performed by 4.0.5.0 Software version.
Work ID: 000000
Starting Write Firmware
Selected model: SM-J260F
Please disable KNOX (if it is activated) in order to avoid damage! Please, make sure the phone battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a "clean" PC (without any drivers installed for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during flashing!
Selected firmware files:
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/AP_J260FXXS5ATA3_CL15031630_QB28476900_REV01_user_low_ship_meta.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/BL_J260FXXS5ATA3_CL15031630_QB28476900_REV01_user_low_ship.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/CP_J260FXXS5ATA1_CP14809736_CL15031630_QB28365576_REV01_user_low_ship.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/CSC_OMC_OJM_J260FOJM5ATA1_CL16294654_QB28365648_REV00_user_low_ship.tar.md5
Connecting device in Download Mode...
Connected successfully to port: COM9
Communicated successfully!
Writing PIT section
Preparing to send PIT
Sending PIT in one package
Finalizing PIT write
PIT file sent successffully
Writing RECOVERY section...
File name: recovery.img.lz4
Section RECOVERY has been written successfully
Writing SYSTEM section...
File name: system.img.lz4
Section SYSTEM has been written successfully
Writing VENDOR section...
File name: vendor.img.lz4
Section VENDOR has been written successfully
Writing USERDATA section...
File name: userdata.img.lz4
Section USERDATA has been written successfully
Writing BOOTLOADER section...
File name: sboot.bin.lz4
Section BOOTLOADER has been written successfully
Writing PARAM section...
File name: param.bin.lz4
Section PARAM has been written successfully
Writing CM section...
File name: cm.bin.lz4
Section CM has been written successfully
Writing RADIO section...
File name: modem.bin.lz4
Section RADIO has been written successfully
Writing CACHE section...
File name: cache.img.lz4
Section CACHE has been written successfully
Writing ODM section...
File name: odm.img.lz4
Section ODM has been written successfully
Writing OMR section...
File name: omr.img.lz4
Section OMR has been written successfully
Writing HIDDEN section...
File name: hidden.img.lz4
Section HIDDEN has been written successfully
Finalizing write firmware. Restarting phone...
Write Firmware done
Execution time 2 minute(s) 36 second(s)
Performed by 4.0.5.0 Software version.
Work ID: 000000
Starting Write Firmware
Selected model: SM-J260F
Please disable KNOX (if it is activated) in order to avoid damage! Please, make sure the phone battery is fully charged. Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a "clean" PC (without any drivers installed for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during flashing!
Selected firmware files:
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/AP_J260FXXS5ATA3_CL15031630_QB28476900_REV01_user_low_ship_meta.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/BL_J260FXXS5ATA3_CL15031630_QB28476900_REV01_user_low_ship.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/CP_J260FXXS5ATA1_CP14809736_CL15031630_QB28365576_REV01_user_low_ship.tar.md5
G:/SamSung FirmWare/J260F/J260FXXS5ATA3_J260FOJM5ATA1_ACR/CSC_OMC_OJM_J260FOJM5ATA1_CL16294654_QB28365648_REV00_user_low_ship.tar.md5
Connecting device in Download Mode...
Connected successfully to port: COM9
Communicated successfully!
Writing PIT section
Preparing to send PIT
Sending PIT in one package
Finalizing PIT write
PIT file sent successffully
Writing BOOT section...
File name: boot.img.lz4
Section BOOT has been written successfully
Writing RECOVERY section...
File name: recovery.img.lz4
Section RECOVERY has been written successfully
Writing SYSTEM section...
File name: system.img.lz4
Section SYSTEM has been written successfully
Writing VENDOR section...
File name: vendor.img.lz4
Section VENDOR has been written successfully
Writing USERDATA section...
File name: userdata.img.lz4
Section USERDATA has been written successfully
Writing BOOTLOADER section...
File name: sboot.bin.lz4
Section BOOTLOADER has been written successfully
Writing PARAM section...
File name: param.bin.lz4
Section PARAM has been written successfully
Writing CM section...
File name: cm.bin.lz4
Section CM has been written successfully
Writing RADIO section...
File name: modem.bin.lz4
Section RADIO has been written successfully
Writing CACHE section...
File name: cache.img.lz4
Section CACHE has been written successfully
Writing ODM section...
File name: odm.img.lz4
Section ODM has been written successfully
Writing OMR section...
File name: omr.img.lz4
Section OMR has been written successfully
Writing HIDDEN section...
File name: hidden.img.lz4
Section HIDDEN has been written successfully
Finalizing write firmware. Restarting phone...
Write Firmware done
Execution time 2 minute(s) 2 second(s)
Performed by 4.0.5.0 Software version.
Work ID: 0000000
Starting Repair Imei (Nov.2020)
Selected model: SM-J260F
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
Reading info...
Detected model: SM-J260F
Fingerprint: samsung/j2coreltecis/j2corelte:8.1.0/M1AJB/J260FXXS5ATA3:user/release-keys
Firmware compiled date: Wed Jan 8 19:21:52 KST 2020
PDA version: J260FXXS5ATA3
CSC version: J260FOJM5ATA1
SW version: J260FXXS5ATA1
Build number: QB14809736
Phone SN: RZ8M12R0PXK
Android version: 8.1.0 (M1AJB)
Sales code: XSG
Country: UAE
HW platform: exynos7570
HW Chip: exynos5
HW Modem: MP 0.500
Security patch level: 2020-01-01
Warranty Void: 1
Codename: j2coreltecis
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SHANNON305
Checking network status...
Rebooting device...
Searching ADB devices...
Connecting to server...
Username: tajmobile
Starting exploit...
Current IMEI A: 8600
Current IMEI B: 8600
Resetting MSL...
Repairing IMEI A...
New IMEI A: 3523
Repairing IMEI B...
New IMEI B: 352
Rebooting device...
Repair Imei (Nov.2020) done
Execution time 2 minute(s) 54 second(s)
Performed by 4.0.5.0 Software version.
Work ID: 00
Starting Repair Network (Nov.2020)
Selected model: SM-J260F
Searching ADB devices...
Press "OK" button on the device to allow USB debugging
Reading info...
Detected model: SM-J260F
Fingerprint: samsung/j2coreltecis/j2corelte:8.1.0/M1AJB/J260FXXS5ATA3:user/release-keys
Firmware compiled date: Wed Jan 8 19:21:52 KST 2020
PDA version: J260FXXS5ATA3
CSC version: J260FOJM5ATA1
SW version: J260FXXS5ATA1
Build number: QB14809736
Phone SN: RZ8M12R0PXK
Android version: 8.1.0 (M1AJB)
Sales code: XSG
Country: UAE
HW platform: exynos7570
HW Chip: exynos5
HW Modem: MP 0.500
Security patch level: 2020-01-01
Warranty Void: 1
Codename: j2coreltecis
SIM 1 status: ABSENT
SIM 2 status: ABSENT
Modem board: SHANNON305
Checking network status...
Rebooting device...
Searching ADB devices...
Connecting to server...
Username: tajmobile
Rebooting device...
Do you want to start checking repair network status? It can take up to 10 minutes. Press "Yes" to start network status check, or "No" and check it manually by inserting sim card.
Repair Network (Nov.2020) done
Execution time 1 minute(s) 25 second(s)
Performed by 4.0.5.0 Software version.