Welcome to Medusa Pro Software version 1.3.8.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Reader #2: FT SCR2000 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 90014A4838473475920105D7F44044F7
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 5D7F440
Manufacturing date : 04/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 393216
Number of sectors : 6307840
Device Manufacturer : samsung
Device Platform : mt6737t
Build ID : MMB29T
Display Build ID : MMB29T.G532GDXU1APJ5
Release ID : 6.0.1
Device Model : SM-G532G
Device Name : grandppltedx
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : grandppltedx-user 6.0.1 MMB29T G532GDXU1APJ5 release-keys
Backup EXT_CSD saved to file C:/Program Files/GsmServer/Medusa/Medusa Pro Software/EXT_CSD Backups/H8G4u_27_07_2017_17_38_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.8; FW: 1.18.
P00: GPT (00000000, 00002000)
P01: BOTA0 (00002000, 00002000)
P02: nvram (00004000, 00004000)
P03: lk (00008000, 00001000)
P04: BOTA1 (00009000, 00001000)
P05: secro (0000A000, 00003800)
P06: seccfg (0000D800, 00000400)
P07: efuse (0000DC00, 00000400)
P08: tee1 (0000E000, 00003000)
P09: BOTA2 (00011000, 00003000)
P10: EFS (00014000, 00004000)
P11: nvdata (00018000, 00010000)
P12: PARAM (00028000, 00004000)
P13: recovery (0002C000, 00008000)
P14: boot (00034000, 00008000)
P15: md1img (0003C000, 00010000)
P16: md1dsp (0004C000, 00002000)
P17: keystore (0004E000, 00004000)
P18: omekeystore (00052000, 00001C00)
P19: proinfo (00053C00, 00001400)
P20: para (00055000, 00000400)
P21: PERSISTENT (00055400, 00000400)
P22: STEADY (00055800, 00000800)
P23: protect1 (00056000, 00004000)
P24: protect2 (0005A000, 00004000)
P25: RESERVE2 (0005E000, 00002000)
P26: system (00060000, 00604000)
P27: cache (00664000, 000C8000)
P28: hidden (0072C000, 00032000)
P29: userdata (0075E000, 00730000)
Selected pit file: C:/Users/maanarman/Desktop/G532G/PIT-SM-G532G-15-03-2017_09-07-10.pit
Open file "C:/Users/maanarman/Desktop/SM-G532G_1_20170103190726_cl2wlkyv46_fac/BL_G532GDXU1APL5_CL10197708_QB12005532_REV00_user_low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOTLOADER... Done.
Switched to user area.
Writing partition lk... Done.
Writing partition efuse... Done.
Writing partition tee1... Done.
Writing partition PARAM... Done.
Writing is finished.
SW: 1.3.8; FW: 1.18.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Reader #2: FT SCR2000 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1
Bus speed : Auto
Connecting...
Device : Hynix eMMC H8G4u
Page size : 512 B
Block size : 512 B
Block count : 15269888
Size : 7.28 GB
---------------------------------------------------------------
CID Info
CID : 90014A4838473475920105D7F44044F7
Manufacturer ID : 0X90
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X4A
Product name : H8G4u
Product revision : 0.1
Product serial number : (hex) 5D7F440
Manufacturing date : 04/2017
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFFFFFFFE78A40002B
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : 01001000
Boot partition enable : Boot partition 1 (Bus width = 1Bit)
Boot ACK : Boot acknowledge sent during boot operation Bit
Boot bus conditions : 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 3817472 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...Ok
Disk/Image size : d2000000 bytes
Device sector size : 512 bytes
Partition offset : 393216
Number of sectors : 6307840
Device Manufacturer : samsung
Device Platform : mt6737t
Build ID : MMB29T
Display Build ID : MMB29T.G532GDXU1APJ5
Release ID : 6.0.1
Device Model : SM-G532G
Device Name : grandppltedx
Architecture ABI : armeabi-v7a
Architecture ABI2 : armeabi
Architecture ABI List : armeabi-v7a,armeabi
Build Description : grandppltedx-user 6.0.1 MMB29T G532GDXU1APJ5 release-keys
Backup EXT_CSD saved to file C:/Program Files/GsmServer/Medusa/Medusa Pro Software/EXT_CSD Backups/H8G4u_27_07_2017_17_38_41.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.3.8; FW: 1.18.
P00: GPT (00000000, 00002000)
P01: BOTA0 (00002000, 00002000)
P02: nvram (00004000, 00004000)
P03: lk (00008000, 00001000)
P04: BOTA1 (00009000, 00001000)
P05: secro (0000A000, 00003800)
P06: seccfg (0000D800, 00000400)
P07: efuse (0000DC00, 00000400)
P08: tee1 (0000E000, 00003000)
P09: BOTA2 (00011000, 00003000)
P10: EFS (00014000, 00004000)
P11: nvdata (00018000, 00010000)
P12: PARAM (00028000, 00004000)
P13: recovery (0002C000, 00008000)
P14: boot (00034000, 00008000)
P15: md1img (0003C000, 00010000)
P16: md1dsp (0004C000, 00002000)
P17: keystore (0004E000, 00004000)
P18: omekeystore (00052000, 00001C00)
P19: proinfo (00053C00, 00001400)
P20: para (00055000, 00000400)
P21: PERSISTENT (00055400, 00000400)
P22: STEADY (00055800, 00000800)
P23: protect1 (00056000, 00004000)
P24: protect2 (0005A000, 00004000)
P25: RESERVE2 (0005E000, 00002000)
P26: system (00060000, 00604000)
P27: cache (00664000, 000C8000)
P28: hidden (0072C000, 00032000)
P29: userdata (0075E000, 00730000)
Selected pit file: C:/Users/maanarman/Desktop/G532G/PIT-SM-G532G-15-03-2017_09-07-10.pit
Open file "C:/Users/maanarman/Desktop/SM-G532G_1_20170103190726_cl2wlkyv46_fac/BL_G532GDXU1APL5_CL10197708_QB12005532_REV00_user_low_ship_MULTI_CERT.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOTLOADER... Done.
Switched to user area.
Writing partition lk... Done.
Writing partition efuse... Done.
Writing partition tee1... Done.
Writing partition PARAM... Done.
Writing is finished.
SW: 1.3.8; FW: 1.18.
