Code:
Welcome to Octoplus/Octopus Box Samsung software version 2.4.4
-----------------------------------------------------------------------------------
To connect GT-I9300 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Connect usb cable to phone.
6. Go to dial window.
7. Enter *#9090# number.
8. Set speed to 115200.
9. Reboot phone.
10. Press "Read Info" in software.
Selected firmware file: g361hxxu0aog3_g361hojv0aog1_ksa_android_
5.1.1_2.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-G361H into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing SBOOT section...
SBOOT section has been written successfully.
Writing SBOOT2 section...
SBOOT2 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing WDSP section...
WDSP section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.4.4 Software version.