Legitunlocks.com
Martview VS-01 7inch Built-in Vacuum Pump Level LCD Screen Separator

Samsung A037F Dead Boot Repair By USB Without UFI & JTAG Box 100% Tested

romdevelopers

romdevelopers

Friend's Martview
Nov 22, 2016
258
49
BD


Dear viewer, In this article you will learn how to download Samsung A037F Dead Boot Repair File. you can repair your smart phone using by our File, you will find driver Dead boot file in zip file folder Without jtag box solution
​

​


Dead After Flash / Dead After Root / Dead After Downgrade /Dead After Format

Samsung A037F Dead Boot Repair Without UFI Box | Samsung A037F Dead Boot Repair Without Easy JTAG Box | Samsung A037F No Need Dump File
1669660739541.png

1669660715089.png


U1 & U2 Binary Support
Download From Here

This File 100% Tested Money Back Guarantee

You Can Take Remote Service From US To Fix Your Phone No Need Any Box Dongle Contact US : +8801829776585

Note : This file Only For Paid user So if want free then it's not 4 you . it's premium section​

1669660723185.png

HOW TO FLASH VIA SP FLASH TOOL Metiateck Device​

    • Download And Install USB Driver [If Already have Already Then Skip This Step] .
    • Extract the flash file & Copy Folder Location
    • Open Latest SP Flash Tool If You Don’t have Then Find In Our Firmware Folder .
    • SP flash tool run As Administrator.
    • load scatter files from the extracted firmware folder or past in folder location that you copy.
    • Use original USB cable for flashing to pc
    • power off your smart phone and plug usb cable in brom mode [some phone has require hold vol+ vol- for boot in Pc
    • if usb port is Detected to Your PC Flashing Will Start Automatically
    • Wait for the process to finish, and please do not unplug your device before until the process complete
    • If the flashing is successful, a green ring massage will show on the display.
    • Unplug usb your phone from the computer and power on and done

  • How To Flash With Odin Tools
1. Extract (unzip) Firmware
2. Download Latest Odin Tool
3. Extract Odin ZIP file
4. Open Odin execute file
5. Reboot Samsung phone in Download Mode (hold Home + Power + Volume Down buttons then plug-in cable)
6. Connect you Samsung phone and wait until you get a blue sign in Odin
7. Add the 1 file Samsung firmware to files Samsung firmware (AP/BL/CP/CSC) to it's slots
8. Make sure re-partition is NOT ticked
9. Click the START button, sit back and wait few minutes To Finished Flashing Complete
 
You must log in or register to reply here.
Top