Samsung a032f frp reset sucessfull wiyh cm2sp2
SAMSUNG A032F FRP RESET SUCESSFULL WIYH CM2SP2
Card found : ****** , v0154
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Open : A032F_bit2_wipe+frp_by_kamal_singla.pac
VER : BP_R1.0.0
LEN : 1.48 MiB
CPU : kamal_singla
VER : A032F_bit2_wipe+frp_by_kamal
Reading package ...
Read package finished!
Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : A032F_bit2_wipe+frp_by_kamal_singla.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Prepare target ...
Prepare Ok!
FSIMG : kamal.img
FSIMG : kamal1.img
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:01:29
Samsung a032f frp reset sucessfull wiyh cm2sp2
SAMSUNG A032F FRP RESET SUCESSFULL WIYH CM2SP2
Card found : ****** , v0154
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Open : A032F_bit2_wipe+frp_by_kamal_singla.pac
VER : BP_R1.0.0
LEN : 1.48 MiB
CPU : kamal_singla
VER : A032F_bit2_wipe+frp_by_kamal
Reading package ...
Read package finished!
Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : A032F_bit2_wipe+frp_by_kamal_singla.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Prepare target ...
Prepare Ok!
FSIMG : kamal.img
FSIMG : kamal1.img
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:01:29
SAMSUNG A032F FRP RESET SUCESSFULL WIYH CM2SP2
Card found : ****** , v0154
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Open : A032F_bit2_wipe+frp_by_kamal_singla.pac
VER : BP_R1.0.0
LEN : 1.48 MiB
CPU : kamal_singla
VER : A032F_bit2_wipe+frp_by_kamal
Reading package ...
Read package finished!
Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : A032F_bit2_wipe+frp_by_kamal_singla.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Prepare target ...
Prepare Ok!
FSIMG : kamal.img
FSIMG : kamal1.img
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:01:29
Samsung a032f frp reset sucessfull wiyh cm2sp2
SAMSUNG A032F FRP RESET SUCESSFULL WIYH CM2SP2
Card found : ****** , v0154
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Open : A032F_bit2_wipe+frp_by_kamal_singla.pac
VER : BP_R1.0.0
LEN : 1.48 MiB
CPU : kamal_singla
VER : A032F_bit2_wipe+frp_by_kamal
Reading package ...
Read package finished!
Operation : Flash Firmware [ v2.14 ]
Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : Update PMT : False
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : PAC : A032F_bit2_wipe+frp_by_kamal_singla.pac
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0020
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : True
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : Control transfered!
Boot Done!
Prepare target ...
Prepare Ok!
FSIMG : kamal.img
FSIMG : kamal1.img
Flashing finished!
Reconnect Power/Cable!
Done!
Elapsed: 00:01:29
