Legitunlocks.com
Martview SP-01 Intelligent Screen Protector Film Cutter Machine

DTPro Repair IMEI for Qualcomm P50 Pro JAD-LX9 (EMUI 14.2) Using DT Pro Tool

DTPro Tool
.::Greed::.

.::Greed::.

Friend's Martview
Jun 10, 2019
1,416
1,001
Step-by-Step Guide: Repair IMEI for Qualcomm P50 Pro JAD-LX9 (EMUI 14.2) Using DT Pro Tool​

1729836810735.png ​

Tool Required: DT Pro Tool​

Instructions:​

  1. Open DT Pro Tool: Launch the DT Pro Tool on your computer.
  2. Select Brand Tab: Navigate to the "Brand" tab in the tool interface.
  3. Choose Model: Select the P50 Pro JAD-LX9 model (with the latest security).
  4. Connect Phone in Test Point Mode:
    • Place your device into Test Point Mode to generate the Qualcomm 9008 port.
    • In the DT Pro Tool, manually select the Qualcomm 9008 port.
  5. Go to Special Task Tab:
    • Choose the "Special Task" tab and perform the following:
    • Backup Security (EFS/IMEI)
    • Backup Firmware
  6. Change Storage Type:
    • Switch the storage type from Normal/Single RAW to Encrypted. This is necessary for resetting the EFS and loading the backup file.
  7. Select RAW File:
    • Select the "Select RAW File" tab and choose the file named "(JAD) BootloaderImage.rev.dftpro".
    • Important: Make sure all partitions are checked.
  8. Put the Device in Test Point Mode Again:
    • Once again, place the phone in Test Point Mode and click the "Write" button to begin flashing the file.
  9. Flash the Bootloader File:
    • After flashing, you will hear a peculiar sound. Proceed to flash the backup file that was saved earlier.
  10. Select RAW File for RPL:
    • Go to the "Select RAW File" tab and select the RPL file (this is the compressed file shared in the post).
    • Extract the .rar file and load the RPL file. Switch to Encrypted mode before proceeding.
  11. Perform Test Point Again:
    • Once again, enter Test Point Mode and press the "Write" button to flash the RPL file.
  12. Finish Writing RPL File:
    • After writing the RPL file, the Qualcomm port will remain open.
  13. Enter Manufacture Mode:
    • Put the device into Manufacture Mode by entering the code: *#*#2846579#*#* On the dialer. The phone will display "DBAdapter Reserved Interface."
  14. IMEI Repair:
    • Return to the "Special Task" tab and select the IMEI Repair option.
  15. Enter Original IMEIs:
    • Copy and paste the original IMEI numbers. You will hear a familiar sound, indicating the process is successful.
  16. Done: The IMEI repair process is now complete.
Download link
1729851496325.png
If you find my post helpful, press like button✌​
 
  • Like
Reactions: Mttmoussa
Mttmoussa

Mttmoussa

Friend's Martview
Aug 25, 2019
114
24
.::Greed::. said:
Step-by-Step Guide: Repair IMEI for Qualcomm P50 Pro JAD-LX9 (EMUI 14.2) Using DT Pro Tool​

Tool Required: DT Pro Tool​

Instructions:​

  1. Open DT Pro Tool: Launch the DT Pro Tool on your computer.
  2. Select Brand Tab: Navigate to the "Brand" tab in the tool interface.
  3. Choose Model: Select the P50 Pro JAD-LX9 model (with the latest security).
  4. Connect Phone in Test Point Mode:
    • Place your device into Test Point Mode to generate the Qualcomm 9008 port.
    • In the DT Pro Tool, manually select the Qualcomm 9008 port.
  5. Go to Special Task Tab:
    • Choose the "Special Task" tab and perform the following:
    • Backup Security (EFS/IMEI)
    • Backup Firmware
  6. Change Storage Type:
    • Switch the storage type from Normal/Single RAW to Encrypted. This is necessary for resetting the EFS and loading the backup file.
  7. Select RAW File:
    • Select the "Select RAW File" tab and choose the file named "(JAD) BootloaderImage.rev.dftpro".
    • Important: Make sure all partitions are checked.
  8. Put the Device in Test Point Mode Again:
    • Once again, place the phone in Test Point Mode and click the "Write" button to begin flashing the file.
  9. Flash the Bootloader File:
    • After flashing, you will hear a peculiar sound. Proceed to flash the backup file that was saved earlier.
  10. Select RAW File for RPL:
    • Go to the "Select RAW File" tab and select the RPL file (this is the compressed file shared in the post).
    • Extract the .rar file and load the RPL file. Switch to Encrypted mode before proceeding.
  11. Perform Test Point Again:
    • Once again, enter Test Point Mode and press the "Write" button to flash the RPL file.
  12. Finish Writing RPL File:
    • After writing the RPL file, the Qualcomm port will remain open.
  13. Enter Manufacture Mode:
    • Put the device into Manufacture Mode by entering the code: *#*#2846579#*#* On the dialer. The phone will display "DBAdapter Reserved Interface."
  14. IMEI Repair:
    • Return to the "Special Task" tab and select the IMEI Repair option.
  15. Enter Original IMEIs:
    • Copy and paste the original IMEI numbers. You will hear a familiar sound, indicating the process is successful.
  16. Done: The IMEI repair process is now complete.
Download link
View attachment 70313

If you find my post helpful, press like button✌​
Click to expand...
thanks master.waiting for nth-nx9 solution
 
You must log in or register to reply here.
Top