Redmi Note 9T 5G (cannong) FRP Remove by Hydra Tool
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Service Function
Factory Reset Protection[FRP]
Auto
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Searching for MTK Device...Found
MTK Port Type : Flashmode BROM
FriendlyName : MediaTek USB Port_V1632 (COM9)
Device : /6&30f0d3dd&0&2
SymbolicName : \\?\usb#vid_0e8d&pid_0003#6&30f0d3dd&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver : 01/22/2015,3.0.1504.0
Service : wdm_usb
Openning Port [COM9] Ok
Handshaking...Ok
HwCode : 0996 {MT6853}
Hwver : 0000
Target config : E7
SBC : 01 (True)
SLA : 02 (True)
DAA : 04 (True)
SWJTAG : 06 (True)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 20 (True)
MEMWRITE : 40 (True)
CMD_C8 : 80 (True)
Connection : BROM
HW Subcode : 8A00
HW Subcode : CA00
SW Ver : 0000
ME_ID : 2787D52EC85527523EFFB6E0DC045432
SOC_ID : E785B20E6082731FC86274036F71BD5206ADF52BBDFE45BE9DD085B453FD4765
Exploiting Device...
Successfully Exploited..
Handshaking...Ok
Dumping Preloader from Bootrom..
Seeking preloader address..Found @ 0x00200BC4
Starting to dump...
Prel Size : 0x0005B9B4
Successfully dump preloader.. [C:\Hydra Tool\Boot\PreloaderDump\preloader_cannong.bin]
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Connection : BROM
Preparing Download Agent..[MTK_AllInOne_DA_5.2152.bin]
Patching da2 ... Ok
Uploading Stage 1....
Successfully uploaded stage 1, jumping ..
Executing JUMP_DA Address @ 0x00200000
Jumping to 0x00200000 Ok 0xC0
Successfully received DA sync
ONNECTION_AGENT : brom
DRAM config needed for : 4B4D355638303031444D2D4236323200
Sending auto preloader from dump... [preloader_cannong.bin]
Sending emi data.. [DRAM setup passed.]
Sending emi data succeeded.
Uploading stage 2...
Upload data was accepted. Jumping to stage 2...
Successfully uploaded stage 2
ERAM Size : 0x0000000000070000-448 KB
IRAM Size : 0x0000000100000000-4 GB
UFS MID : 0x4B
UFS FWVer : 0x2302
UFS Blocksize : 0x0000000000001000-4 KB
UFS LU0 Size : 0x0000000000400000-4 MB
UFS LU1 Size : 0x0000000000400000-4 MB
UFS LU2 Size : 0x0000001DCB000000-119.172 GB
UFS ID : 5
UFS CID : 4B4D355638303031444D2D423632320000000000
HW-CODE : 0x996
HWSUB-CODE : 0x8A00
HW-VERSION : 0xCA00
SW-VERSION : 0x0
CHIP-EVOLUTION : 0x1
DA-VERSION : 1.0
Speed : high-speed
Upload data was accepted. Jumping to stage 2...
DA Extensions successfully added
Reading Partition Table ..
Partition Count : 62
--------------- Reading build.prop content ---------------
Product : cannong
Marketname : ro.product.systemRedmi Note 9T
ID : QP1A.190711.020
SDK : 29
Release : 10
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Locale : en-GB
Description : cannong-user 10 QP1A.190711.020 V12.0.8.0.QJEMIXM release-keys
Display ID : QP1A.190711.020
Security Patch : 2021-03-01
StorageType : mtp
--------------- end of build.prop content ---------------
Reading IMEI........
IMEI1 : Unable To decrypt Unknown Keys[5G]
IMEI2 : Unable To decrypt Unknown Keys[5G]
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
Backing up Security..
- preloader(preloader.bin), 512 KB = Ok [preloader_cannong.bin]
*Creating Scatter file... C:\Hydra Tool\Backup\MTKBKUP\0996_2787D52EC85527523EFFB6E0DC045432\Auto\052423014037\6853_Android_scatter.txt
- pgpt(pgpt.bin), 32 KB = Ok
- nvram(nvram.bin), 64 MB = Ok
- nvdata(nvdata.bin), 64 MB = Ok
- frp(frp.bin), 1024 KB = Ok
- protect1(protect1.bin), 8 MB = Ok
- protect2(protect2.bin), 8 MB = Ok
- persist(persist.bin), 66.469 MB = Ok
- proinfo(proinfo.bin), 3 MB = Ok
- nvcfg(nvcfg.bin), 32 MB = Ok
- sec1(sec1.bin), 2 MB = Ok
- seccfg(seccfg.bin), 8 MB = Ok
Backup Done!!!
Rebooting Device...
Reboot Option : RebootToNormal
Rebooting Operation Done!!!!
Action Result : Ok
Elapsed Time : 00:01:13