Help redmi Note 8 [GINKGO] After Dual IMEI repair NO Network Help?

[uzbestgsm]

Hello DT PRO TEAM
Redmi note 8 [ginkgo]
board id 1.30.0
ddr hynix
and
ddr samsung
after repair dual imei network no service
please help how to fix?

 

[DTPRO Tool]

Hello!
please post Screenshot of Operation!

Steps

1. replace resistors for RSA Dissable
2. reset EFS
3. Write engineer Firmware
4. Write ENG QCN
5. repair IMEI1|IMEI2
6. Write Stock Firmware

Note
please Write QCN, Check Value of resistor replaced,

PD.
this is already tested by many users in different parts of the world.
Please do not put SIMCARD on the Device during the process or with engineer firmware installed.

Br.

 

[uzbestgsm]

Thanks.
problem solved

 

[uzbestgsm]

Thanks.
problem solved
10k remove and jumper

 

[uzbestgsm]

redmi note 8 [ginkgo] [bl locked]
board id: 1.30.0
ddr vendor: samsung [4mb,64gb]
ddr vendor: hynix [4mb,64gb]

rsa hw repair [install 100k and 10k or jumper]
write eng rom [edl mode - dtpro - DownGrade ENG FIMRWARE Redmi Note8 Ginkgo DTPRO TEAM eraseNV.zip]
enable diag port [
qcn write [dtpro] [dtpro folder, Note8 DualSiM QCN .qcn]
repair imei 1 and 2 [dtpro] [after repair auto reboot system]
enable diag port
repair imei only 2-imei [dtpro]
reboot system manually
write stock rom [edl mode - dtpro - ginkgo_id_global_images_V12.0.2.0.QCOIDXM_20210306.0000.00_10.0_global_dadfbad2ed.tgz]
insert sim and check network
ok ok ok

 

[behradxl]

hi
help redmi note 8 no servis how to fix?

 

[RDXUNLOCK]

replace resistors

 

[adrenalinh]

Hello!
please post Screenshot of Operation!

Steps

1. replace resistors for RSA Dissable
2. reset EFS
3. Write engineer Firmware
4. Write ENG QCN
5. repair IMEI1|IMEI2
6. Write Stock Firmware

Note
please Write QCN, Check Value of resistor replaced,

PD.
this is already tested by many users in different parts of the world.
Please do not put SIMCARD on the Device during the process or with engineer firmware installed.

Br.

please help me! i have same problem, after repair no network!

 

[DTPRO Tool]

please help me! i have same problem, after repair no network!

Use original QCN and check persist

 

[adrenalinh]

Use original QCN and check persist

where i can find orginal qcn? i tested in the folder dtpro.

 

[Tariq00433]

if you did backup so find it at the folder of Dtpro tool qcnbackup folder writer it from there

 

[adrenalinh]

if you did backup so find it at the folder of Dtpro tool qcnbackup folder writer it from there

Is there a problem in the resistor 100k ? i changed 10k to jumper. but problem not solved! factory ID: unknown

 

[adrenalinh]

if you did backup so find it at the folder of Dtpro tool qcnbackup folder writer it from there

foud solution! if the boar ver is the latest. flash firmvare miui ver 12 or latest. on miui 11 not worked network

 

[shoaibrao]

What Is The New Resistors Value?
I Used 10K On Both
Is It Okay?
After Flash Stock Firmware NvData Corrupted And Restarting Even Flashed ENG Firmware Modem
Need Help Please
Thanks Anticipation

 

[shoaibrao]

What Is The New Resistors Value?
I Used 10K On Both
Is It Okay?
After Flash Stock Firmware NvData Corrupted And Restarting Even Flashed ENG Firmware Modem
Need Help Please
Thanks Anticipation

Now Phone On But No Network
Now Showing Board ID: 3.30
EMMC: Micron 4/64
Used 100K And 10K Resistors
Need Help Please

 

[DTPRO Tool]

How to Dissable RSA on Redmi Note 8 (Ginkgo)

please do not put SIMCARD on phone with Factory Firmware Installed
-Use ENG QCN on Module > Miui 12

 

[shoaibrao]

How to Dissable RSA on Redmi Note 8 (Ginkgo)

please do not put SIMCARD on phone with Factory Firmware Installed
-Use ENG QCN on Module > Miui 12

Sir Flashed With Miui 12
Can You Help Me For Appropriate QCN Please

 

[DTPRO Tool]

Sir Flashed With Miui 12
Can You Help Me For Appropriate QCN Please

On Qualcomm Module are this files