UMT redmi note 10 sunny flash successfully done

[sanaullah2012]

Operation : Multi Flash
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1500900 [SM6150] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6150]...Done
Executing Loader...OK
Auth Enabled Device! You need Mi Auth Account to service!
Skipping Auth...OK
Detecting Chip Type...OK
Hardware : SM6150, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [65536], Out: 16384, Sector Size: 4096
Processing [rawprogram0.xml]
Writing [super.img ] -> [super]...Done
Writing [vbmeta_system.img] -> [vbmeta_system_a] ...Done
Writing [metadata.img ] -> [metadata]...Done
Writing [rescue.img ] -> [rescue]...Done
Writing [userdata.img ] -> [userdata]...Done
Writing [gpt_main0.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup0.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram1.xml]
Writing [xbl.elf] -> [xbl_a] ...Done
Writing [xbl_config.elf] -> [xbl_config_a] ...Done
Writing [gpt_main1.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup1.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram2.xml]
Writing [xbl.elf] -> [xbl_b] ...Done
Writing [xbl_config.elf] -> [xbl_config_b] ...Done
Writing [gpt_main2.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup2.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram3.xml]
Writing [gpt_main3.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup3.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram4.xml]
Writing [aop.mbn] -> [aop_a] ...Done
Writing [tz.mbn] -> [tz_a] ...Done
Writing [hyp.mbn] -> [hyp_a] ...Done
Writing [NON-HLOS.bin] -> [modem_a] ...Done
Writing [BTFM.bin] -> [bluetooth_a] ...Done
Writing [abl.elf] -> [abl_a] ...Done
Writing [dspso.bin] -> [dsp_a] ...Done
Writing [km41.mbn] -> [keymaster_a] ...Done
Writing [boot.img] -> [boot_a] ...Done
Writing [cmnlib.mbn] -> [cmnlib_a] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64_a] ...Done
Writing [devcfg.mbn] -> [devcfg_a] ...Done
Writing [qupv3fw.elf] -> [qupfw_a] ...Done
Writing [vbmeta.img] -> [vbmeta_a] ...Done
Writing [dtbo.img] -> [dtbo_a] ...Done
Writing [imagefv.elf] -> [imagefv_a] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp_a] ...Done
Writing [vendor_boot.img] -> [vendor_boot_a] ...Done
Writing [aop.mbn] -> [aop_b] ...Done
Writing [tz.mbn] -> [tz_b] ...Done
Writing [hyp.mbn] -> [hyp_b] ...Done
Writing [NON-HLOS.bin] -> [modem_b] ...Done
Writing [BTFM.bin] -> [bluetooth_b] ...Done
Writing [abl.elf] -> [abl_b] ...Done
Writing [dspso.bin] -> [dsp_b] ...Done
Writing [km41.mbn] -> [keymaster_b] ...Done
Writing [boot.img] -> [boot_b] ...Done
Writing [cmnlib.mbn] -> [cmnlib_b] ...Done
Writing [cmnlib64.mbn] -> [cmnlib64_b] ...Done
Writing [devcfg.mbn] -> [devcfg_b] ...Done
Writing [qupv3fw.elf] -> [qupfw_b] ...Done
Writing [vbmeta.img] -> [vbmeta_b] ...Done
Writing [dtbo.img] -> [dtbo_b] ...Done
Writing [imagefv.elf] -> [imagefv_b] ...Done
Writing [uefi_sec.mbn] -> [uefisecapp_b] ...Done
Writing [logfs_ufs_8mb.bin] -> [logfs] ...Done
Writing [storsec.mbn] -> [storsec] ...Done
Writing [gpt_main4.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup4.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Processing [rawprogram5.xml]
Writing [gpt_main5.bin] -> [PrimaryGPT] ...Done
Writing [gpt_backup5.bin] -> [BackupGPT] ...Done
Applying Patches................Done
Reading Partition Table...OK
Resetting FRP Lock.......Done
Resetting device...Done
Operation Finished.
QcFire Ver. 7.1.0

 

[mirbek]

можешь поделиться прошивкой