Selected model: Xiaomi Redmi 13C (Gale)
Operation: Flash (Upgrade)
Software version: 7.4
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES
Parse scatter file... OK
Load Rom Images... OK
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM23 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xFA220B41, 0x19581AF4, 0x0D6328AF, 0x29BB030F
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC128
EMMC_ID : 0xD62D004D4D4331323851292CA5CBCAA3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x1D1EC00000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : alps
Product Manufacturer : Xiaomi
Product Model : gale
Product Name : vnd_gale
Product Device : gale
Product Board : gale
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Tue May 28 07:59:07 UTC 2024
Display ID : UP1A.231005.007
Security Patch : 2024-06-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : V816.0.2.0.UGPMIXM
Userdata FS Type : F2FS
WARNING!!! BROM disabled by EFUSE. Continue? YES
Prepare list for upgrade... OK
Checking upgrade list... OK
Prepare format list... OK
Prepare final partition list... OK
Read partition "preloader"... OK
Read partition "nvcfg"... OK
Read partition "persist"... OK
Read partition "persistbak"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "proinfo"... OK
Read partition "nvram"... OK
Verify checksum... OK
Format "EMMC_USER" partition( 0x00008000..0x07CA1FFF )... OK
Format "EMMC_USER" partition( 0x09CA2000..0x0DCA1FFF )... OK
Format "EMMC_USER" partition( 0x15000000..0x289FFFFF )... OK
Format "EMMC_USER" partition( 0x28D00000..0x2A77FFFF )... OK
Format "EMMC_USER" partition( 0x2E780000..0x1D1B0F7FFF )... OK
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Checking partition table layout changed... OK
Read major partition table... OK
Checking major partition table layout changed... OK
Download "preloader"... OK "preloder_backup"... OK
Download "vbmeta_a"... OK
Download "vbmeta_system_a"... OK
Download "vbmeta_vendor_a"... OK
Download "md1img_a"... OK
Download "spmfw_a"... OK
Download "scp_a"... OK
Download "sspm_a"... OK
Download "gz_a"... OK
Download "lk_a"... OK
Download "boot_a"... OK
Download "dtbo_a"... OK
Download "tee_a"... OK
Download "efuse"... OK
Download "logo_a"... OK
Download "logo_b"... OK
Download "rescue"... OK
Download "super"... OK
Download "userdata"... OK
Flashing done!
Operation: Flash (Upgrade)
Software version: 7.4
If BROM was disabled and you want write preloader partition not compatible for this model, phone will bricked. Recovery possible only with ISP mode.
Continue? YES
Parse scatter file... OK
Load Rom Images... OK
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM23 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xFA220B41, 0x19581AF4, 0x0D6328AF, 0x29BB030F
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC128
EMMC_ID : 0xD62D004D4D4331323851292CA5CBCAA3
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x1D1EC00000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : alps
Product Manufacturer : Xiaomi
Product Model : gale
Product Name : vnd_gale
Product Device : gale
Product Board : gale
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Tue May 28 07:59:07 UTC 2024
Display ID : UP1A.231005.007
Security Patch : 2024-06-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : V816.0.2.0.UGPMIXM
Userdata FS Type : F2FS
WARNING!!! BROM disabled by EFUSE. Continue? YES
Prepare list for upgrade... OK
Checking upgrade list... OK
Prepare format list... OK
Prepare final partition list... OK
Read partition "preloader"... OK
Read partition "nvcfg"... OK
Read partition "persist"... OK
Read partition "persistbak"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "proinfo"... OK
Read partition "nvram"... OK
Verify checksum... OK
Format "EMMC_USER" partition( 0x00008000..0x07CA1FFF )... OK
Format "EMMC_USER" partition( 0x09CA2000..0x0DCA1FFF )... OK
Format "EMMC_USER" partition( 0x15000000..0x289FFFFF )... OK
Format "EMMC_USER" partition( 0x28D00000..0x2A77FFFF )... OK
Format "EMMC_USER" partition( 0x2E780000..0x1D1B0F7FFF )... OK
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Checking partition table layout changed... OK
Read major partition table... OK
Checking major partition table layout changed... OK
Download "preloader"... OK "preloder_backup"... OK
Download "vbmeta_a"... OK
Download "vbmeta_system_a"... OK
Download "vbmeta_vendor_a"... OK
Download "md1img_a"... OK
Download "spmfw_a"... OK
Download "scp_a"... OK
Download "sspm_a"... OK
Download "gz_a"... OK
Download "lk_a"... OK
Download "boot_a"... OK
Download "dtbo_a"... OK
Download "tee_a"... OK
Download "efuse"... OK
Download "logo_a"... OK
Download "logo_b"... OK
Download "rescue"... OK
Download "super"... OK
Download "userdata"... OK
Flashing done!