q mobile infinity _c sp7731cea read flash done

[nasiraslam]

Phone found! [ 212 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : Q_Infinity_C
Model Brand : Qmobile
Model Device: Q_Infinity_C
AndrVersion : 7.0
BaseBand CPU: SP7731CEA
Project Ver : QMobile_Q Infinity C_MP_26_01
Model Ext : QMobile Q Infinity C

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_trunk_W18.03.4_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x960.bin
[Read Ok] : fblogo_480x960.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : trustos.bin
[Read Ok] : vmm.bin
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 3439 MiB
Saved to : C:\Users\Ideal\Desktop\SP7731CEA_Q_Infinity_C_7.0_QMobile_Q_Infinity_C_MP_26_01_QMobile_Q_Infinity_C\
Done!

Elapsed: 00:25:06

Reconnect Power/Cable!

 

[kundicommunication]

Qmobile infinity E read and frp done with cm2


Chinese Miracle II [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

Power Off Phone , re-connect battery , Insert USB cable!

Wait for phone...
Phone found! [ 14 ]
Sync...
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 14 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x01000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : SIGNED with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.00.00
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 90014A484147346132A5426B95BCC4C3
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , 2a4GA
[eMMC] : FLASH_CID : 90014A484147346132A5426B95BCC4C3
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB400000
[eMMC] : FLASH_UCP : 15028 MiB [eMMC 16 GiB]
DEV RID : 0xF465219F467B152EAA881C99700AEFC1
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now ...

xGPT : Normalize settings Ok!

Brand : QMobile
ProdName : Q_Infinity_E
ProdModel : QMobile Q Infinity E
Device : k300
AndroidVer: 7.0
MTKxCPU : MT6580
MTKxPRJ : alps-mp-n0.mp2-V1_tinno6580.we.n_P200

[Read Ok] : preloader_k300.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6580 / V1.1.2 / k300 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2697 MiB
Scatter saved to : C:\Users\Ghulam\Desktop\New folder (2)\MT6580__QMobile__QMobile_Q_Infinity_E__k300__7.0__alps-mp-n0.mp2-V1_tinno6580.we.n_P200\

All done!

Done!
Elapsed: 00:13:53
Reconnect Power/Cable!