Post Success Reports Here Successfully Repaired/Dead Recovered Handset By Ufi Box

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
401
822
india
Skype
[email protected]
Sonork ID
1681209
Oppo A7 ( CPH1901 ) Remove Userlocks+Frp Lock Done Without Any Risk Of Stuck On Logo All Job Successfully Done Ufi-Box Only

5394






Dr.ResearchCenter Team
 

ferouzkassim

Active Member
Oct 11, 2018
52
34
Uganda
Skype
ferouz_kassim
OPPO A7X CPH1903 PASSWORD REMOVE AND FRP DONE

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0x958AA894
Manufacturing date: Sep 2018
CID: 15010047 5036424D 4201958A A89495CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\GP6BMB_958AA894.ext_csd"

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1903
brand: OPPO, model: CPH1903(OPPO AX7)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1903EX_11_A.09)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190225.181918 release-keys

crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMGP6000BM-BXXX/64G


Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0x958AA894
Manufacturing date: Sep 2018
CID: 15010047 5036424D 4201958A A89495CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Factory Reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Done.
Done.

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4224
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GP6BMB (0x475036424d42), rev: 0x01, serial number: 0x958AA894
Manufacturing date: Sep 2018
CID: 15010047 5036424D 4201958A A89495CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

Clear FRP Lock... Done.
 
  • Like
Reactions: Deepesh Sharma

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
401
822
india
Skype
[email protected]
Sonork ID
1681209
Last edited:

cellbhai

Friend's Martview
Sep 26, 2018
345
113
OPPO A3S CPH 1803 AGAIN PATTERN AND FRP DONE

THIS IS INFO

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xB0D3D321
Manufacturing date: Mar 2018
CID: 15010051 4536334D 4203B0D3 D3213508
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1803
brand: OPPO, model: CPH1803(OPPO A3s)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1803EX_11_A.19)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190717.054518 release-keys

crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb (BGA221)

THIS IS PATTERN UNLOCK INFO

Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xB0D3D321
Manufacturing date: Mar 2018
CID: 15010051 4536334D 4203B0D3 D3213508
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)

Factory Reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Done.
Done.

THIS IS FRP
Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-0169
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0xB0D3D321
Manufacturing date: Mar 2018
CID: 15010051 4536334D 4203B0D3 D3213508
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)

Clear FRP Lock... Done.

SUPER......
 

ferouzkassim

Active Member
Oct 11, 2018
52
34
Uganda
Skype
ferouz_kassim
vivo v7 plus password remove done

Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM51)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...

platform: msm8953, cpu abi: arm64-v8a
manufacturer: vivo
board: msm8953, name: PD1708F_EX
brand: vivo, model: vivo 1716
build id: N2G47H, version: 7.1.2 Nougat (N2G47H release-keys)
build description: msm8953_64-user 7.1.2 N2G47H eng.compil.20180528.223559 release-keys

Factory reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Done.

Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM51)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...
MSM Serial number: 0x514a5dcd
MSM HW ID: 0x0009a0e1 (SDM450)
OEM Public Key Hash: 0x60ba997fef6da9f05885fa11f1dd6d2a90d052a257a09c2075d7246cc73c0d43
SBL SW version: 0
Firehose: prog_emmc_firehose_8953_ddr[0].mbn
sha1: 1ae89bc92fc5785b923736eabcf6160076931a1b, size: 354.16 KiB
QC_IMAGE_VERSION: BOOT.BF.3.3-00221
IMAGE_VARIANT: JAADANAZA
OEM_IMAGE_VERSION: compiler033
Sending firehose loader... Done.
Handshaking...
Sending ping... Done.
Sending configurations...
TargetName: 8953
MemoryName: eMMC
Version: 1
Firehose configured.
Storage type: eMMC
Manufacturer ID: 0x15 (Samsung)
Product name: RH64AB (0x524836344142), rev: 0x05, serial number: 0x6D59D814
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

platform: msm8953, cpu abi: arm64-v8a
manufacturer: vivo
board: msm8953, name: PD1708F_EX
brand: vivo, model: vivo 1716
build id: N2G47H, version: 7.1.2 Nougat (N2G47H release-keys)
build description: msm8953_64-user 7.1.2 N2G47H eng.compil.20180528.223559 release-keys

Clear FRP Lock... Done.
 

ferouzkassim

Active Member
Oct 11, 2018
52
34
Uganda
Skype
ferouz_kassim
vivo v7 plus password remove done

Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM51)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...

platform: msm8953, cpu abi: arm64-v8a
manufacturer: vivo
board: msm8953, name: PD1708F_EX
brand: vivo, model: vivo 1716
build id: N2G47H, version: 7.1.2 Nougat (N2G47H release-keys)
build description: msm8953_64-user 7.1.2 N2G47H eng.compil.20180528.223559 release-keys

Factory reset...
Creating filesystem... Done.
Writing cache... Done.
Creating filesystem... Done.
Writing userdata... Done.

Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM51)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...
MSM Serial number: 0x514a5dcd
MSM HW ID: 0x0009a0e1 (SDM450)
OEM Public Key Hash: 0x60ba997fef6da9f05885fa11f1dd6d2a90d052a257a09c2075d7246cc73c0d43
SBL SW version: 0
Firehose: prog_emmc_firehose_8953_ddr[0].mbn
sha1: 1ae89bc92fc5785b923736eabcf6160076931a1b, size: 354.16 KiB
QC_IMAGE_VERSION: BOOT.BF.3.3-00221
IMAGE_VARIANT: JAADANAZA
OEM_IMAGE_VERSION: compiler033
Sending firehose loader... Done.
Handshaking...
Sending ping... Done.
Sending configurations...
TargetName: 8953
MemoryName: eMMC
Version: 1
Firehose configured.
Storage type: eMMC
Manufacturer ID: 0x15 (Samsung)
Product name: RH64AB (0x524836344142), rev: 0x05, serial number: 0x6D59D814
Capacity: 58.25 GiB(62,549,655,552 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 58.24 GiB(62,537,072,640 bytes)

platform: msm8953, cpu abi: arm64-v8a
manufacturer: vivo
board: msm8953, name: PD1708F_EX
brand: vivo, model: vivo 1716
build id: N2G47H, version: 7.1.2 Nougat (N2G47H release-keys)
build description: msm8953_64-user 7.1.2 N2G47H eng.compil.20180528.223559 release-keys

Clear FRP Lock... Done.
 

ferouzkassim

Active Member
Oct 11, 2018
52
34
Uganda
Skype
ferouz_kassim
redmi s2 frp done
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM51)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...
MSM Serial number: 0xfc2e7e88
MSM HW ID: 0x000460e1 (MSM8953)
OEM Public Key Hash: 0x57158eaf1814d78fd2b3105ece4db18a817a08ac664a5782a925f3ff8403d39a
SBL SW version: 1
Firehose: prog_emmc_firehose_8953_ddr[1].mbn
sha1: c8c70e280ecf388e1ba42387268782cac92302a5, size: 366.35 KiB
QC_IMAGE_VERSION: BOOT.BF.3.3-00228
IMAGE_VARIANT: JAADANAZA
OEM_IMAGE_VERSION: c3-bsp-builder-job004.bj
Sending firehose loader... Done.
Handshaking...
Sending ping... Done.
Sending configurations...
TargetName: 8953
MemoryName: eMMC
Version: 1
Firehose configured.
Storage type: eMMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9B7 (0x53304a394237), rev: 0x04, serial number: 0x046BFD7D
Capacity: 29.13 GiB(31,281,119,232 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)

platform: msm8953, cpu abi: armeabi-v7a
manufacturer: Xiaomi
board: ysl, name: ysl
brand: xiaomi, model: Redmi S2
build id: OPM1.171019.011, version: 8.1.0 Oreo (OPM1.171019.011) (MIUI10)
build description: ysl-user 8.1.0 OPM1.171019.011 V10.3.1.0.OEFMIXM release-keys

Clear FRP Lock... Done.
 

ferouzkassim

Active Member
Oct 11, 2018
52
34
Uganda
Skype
ferouz_kassim
redmi s2 frp done
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: Qualcomm HS-USB QDLoader 9008 (COM51)
Connection status: XHCI:HUB3:USB 2.0 High-Speed
USB Driver: [Qualcomm Incorporated] qcusbser, version: 2.1.2.7, date: 8-2-2017
Initializing...
MSM Serial number: 0xfc2e7e88
MSM HW ID: 0x000460e1 (MSM8953)
OEM Public Key Hash: 0x57158eaf1814d78fd2b3105ece4db18a817a08ac664a5782a925f3ff8403d39a
SBL SW version: 1
Firehose: prog_emmc_firehose_8953_ddr[1].mbn
sha1: c8c70e280ecf388e1ba42387268782cac92302a5, size: 366.35 KiB
QC_IMAGE_VERSION: BOOT.BF.3.3-00228
IMAGE_VARIANT: JAADANAZA
OEM_IMAGE_VERSION: c3-bsp-builder-job004.bj
Sending firehose loader... Done.
Handshaking...
Sending ping... Done.
Sending configurations...
TargetName: 8953
MemoryName: eMMC
Version: 1
Firehose configured.
Storage type: eMMC
Manufacturer ID: 0x13 (Micron)
Product name: S0J9B7 (0x53304a394237), rev: 0x04, serial number: 0x046BFD7D
Capacity: 29.13 GiB(31,281,119,232 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)

platform: msm8953, cpu abi: armeabi-v7a
manufacturer: Xiaomi
board: ysl, name: ysl
brand: xiaomi, model: Redmi S2
build id: OPM1.171019.011, version: 8.1.0 Oreo (OPM1.171019.011) (MIUI10)
build description: ysl-user 8.1.0 OPM1.171019.011 V10.3.1.0.OEFMIXM release-keys

Clear FRP Lock... Done.
 

Dr.sunilsingh

Friend's Martview
Aug 2, 2018
401
822
india
Skype
[email protected]
Sonork ID
1681209
OPPO F11 PRO ( CPH1969 ) Remove Userlocks+Frp Lock Done Without Any Risk Of Stuck On Logo All Job Successfully Done Ufi-Box Only
:Y:

OPPO F11 PRO ( CPH1969 ) ISP PINOUT







User lock Full Info....



Remove User lock Full Info....



:S: Successfully Remove All Lock Handset Working Fine With Out Any Risk :Y:









Dr.Research-Center-Team
 
Last edited:

harim1981

Junior Member
Sep 10, 2018
2
0
P
OPPO F11 PRO ( CPH1969 ) Remove Userlocks+Frp Lock Done Without Any Risk Of Stuck On Logo All Job Successfully Done Ufi-Box Only





User lock Full Info....



Remove User lock Full Info....



:S: Successfully Remove All Lock Handset Working Fine With Out Any Risk :Y:









Dr.Research-Center-Team
Okay the
 
Top