Z3X Pandora PRO 7.8 / 7.9 New Released. New devices and new loaders added.

[SPYROS]

​

Pandora PRO 7.9 Released. New devices and new loaders added.


Added support for QCOM phones (EDL mode):

- Nubia Z60 Ultra NX721J
- OnePlus Nord N10 5G BE2025, BE2026, BE2028, BE2029


Added new loaders for:

- SM-A115M BIT 5
- SM-A025A BIT 7
- SM-A025U BIT 5
- SM-A025U1 BIT 5
- SM-A025V BIT 6
- SM-A057F BIT 7
- SM-A236U BIT 8
- SM-A526U BIT D
- SM-A725M BIT 9
- SM-F711N BIT 7
- SM-F726U BIT 8
- SM-F946U BIT 5
- SM-G781V BIT H
- SM-G986U BIT B
- SM-G991U BIT D
- SM-G996U BIT D
- SM-G998U BIT D
- SM-N981U BIT A
- SM-S711U BIT 6
- SM-S901U BIT 7
- SM-S906U BIT 7
- SM-S908U BIT 7


Added support for Mediatek based phones:

Mobicel: R4 LTE, PURE MINI, IX_PLUS, HYPE, Candy, Retro, EPIC_2, BERRY, REBEL,
k510, 4U, VX19, BLADE, FORCE, PLUM, R1 Plus, S1 Smart, Neo LTE, TITAN,
Neo_Plus, ZOOM_1, V2_LTE, FEVER_PLUS_H, ECHO, GEO, R7, ZOOM-H, NEO, CLIK,
RAINBOW, Fever_Plus_J, Mobicel_R6, MobiGo2, MobiGo2L, MobiGo2P

167.95 MB file on MEGA
Pandora PRO 7.8 Released.
- Added support multi scatter firmwares (TECNO, Infinix ... )
- Added support for Lenovo in Preloader mode:
Lenovo Tab Extreme TB570FU, TB570ZU,
Lenovo Tab P12TB370FU, Lenovo Tab P11 Pro Gen 2 TB132FU,
Lenovo Tab M8 Gen 4 TB300FU, TB300XU,
Lenovo Tab M9 TB310FU, TB310XC, TB310XU
- Added support for ZTE QCOM phones (EDL mode):
ZTE Grand X View 4 K87CA, K87CC
ZTE Nubia Red Magic 8 Pro NX729J
- Added new loader for:
SM-A526B BIT A
SM-F721U BIT 7
SM-F731U BIT 5
SM-F741U BIT 2
SM-F936U BIT 7
SM-F956U BIT 2
SM-S911U BIT 5
SM-S916U BIT 5
SM-S918U BIT 5
SM-S921U BIT 4
SM-S926U BIT 4
SM-S928U BIT 4
- Added support for Mediatek based phones:
MEDION: S1035X, B4570, B5032, E1051X, X1030X, P72035, X1031X, E1060X,
E4504, E1042X, E1090X, E5004, E1052X
Movitel: Movitel_M9104, M8424, M8415, M8421, M8422, M8419, M8418, M9103, M8420, M9113, M8426
BLU: J8L, S91 Pro
Alcatel: 5033YR
TECNO: TECNO BE6, TECNO KL5, TECNO KA7O
Moolah_Mobile: TAB10
WIKO: W-V730-EEA, c200
NUU: S6003L
VILLAON: V20
FOXXD: T8 Plus
Mobicel: DANDY_ZAM
VIFONE: S6
TCL: T700X, 6156A, 6156D
ZTE: Blade A465
CUBE: U51GT-C8S
Itel: itel S667LN
MobiIoT: MobiGo2P
Safaricom: Vanilla, NEON RAY 2, NEON_NOVA, Kimem Kerefa
- Added support for Unisoc based phones:
DOOGEE: N55
OSCAL: Pad 18
Safaricom: Neon Ray Ultra, Neon Ray Ultra M, NEON_RAY_PRO
Movitel: M9107, M9110, M9101A, M9106, M9109, M8423, M9111, M9108, M9114, M9112, M9116
ZTE: 8550
PHILIPS: S6210
MEGA: 167.83 MB file on MEGA

 

[dany_boy]

Please login to view image

​

Pandora PRO 7.8 Released.
- Added support multi scatter firmwares (TECNO, Infinix ... )
- Added support for Lenovo in Preloader mode:
Lenovo Tab Extreme TB570FU, TB570ZU,
Lenovo Tab P12TB370FU, Lenovo Tab P11 Pro Gen 2 TB132FU,
Lenovo Tab M8 Gen 4 TB300FU, TB300XU,
Lenovo Tab M9 TB310FU, TB310XC, TB310XU
- Added support for ZTE QCOM phones (EDL mode):
ZTE Grand X View 4 K87CA, K87CC
ZTE Nubia Red Magic 8 Pro NX729J
- Added new loader for:
SM-A526B BIT A
SM-F721U BIT 7
SM-F731U BIT 5
SM-F741U BIT 2
SM-F936U BIT 7
SM-F956U BIT 2
SM-S911U BIT 5
SM-S916U BIT 5
SM-S918U BIT 5
SM-S921U BIT 4
SM-S926U BIT 4
SM-S928U BIT 4
- Added support for Mediatek based phones:
MEDION: S1035X, B4570, B5032, E1051X, X1030X, P72035, X1031X, E1060X,
E4504, E1042X, E1090X, E5004, E1052X
Movitel: Movitel_M9104, M8424, M8415, M8421, M8422, M8419, M8418, M9103, M8420, M9113, M8426
BLU: J8L, S91 Pro
Alcatel: 5033YR
TECNO: TECNO BE6, TECNO KL5, TECNO KA7O
Moolah_Mobile: TAB10
WIKO: W-V730-EEA, c200
NUU: S6003L
VILLAON: V20
FOXXD: T8 Plus
Mobicel: DANDY_ZAM
VIFONE: S6
TCL: T700X, 6156A, 6156D
ZTE: Blade A465
CUBE: U51GT-C8S
Itel: itel S667LN
MobiIoT: MobiGo2P
Safaricom: Vanilla, NEON RAY 2, NEON_NOVA, Kimem Kerefa
- Added support for Unisoc based phones:
DOOGEE: N55
OSCAL: Pad 18
Safaricom: Neon Ray Ultra, Neon Ray Ultra M, NEON_RAY_PRO
Movitel: M9107, M9110, M9101A, M9106, M9109, M8423, M9111, M9108, M9114, M9112, M9116
ZTE: 8550
PHILIPS: S6210
MEGA: 167.83 MB file on MEGA

Thanks for update. Any news about Vivo mtk update or infinix new security

 

[gsmbrawn]

whats about Honor Magic 4 pro ? Just Kiding ! Not suported yet
pls add this serieurs Update pls

 

[Xsa-Scorpion]

Good update
What about realme note 50
Latest version unlocking regional error firmware version A.54

 

[shakil78]

my digtal licance not open and connot chang password invalid email

 

[GSM YOUSAF]

dear z3x team
why you stop samsung tool pro updates?

 

[Akmal Khan]

Thanks For new Update
please work on vivo
vivo can"t Handle Any tool Why ?

 

[shakir77]

Please login to view image

​

Pandora PRO 7.8 Released.
- Added support multi scatter firmwares (TECNO, Infinix ... )
- Added support for Lenovo in Preloader mode:
Lenovo Tab Extreme TB570FU, TB570ZU,
Lenovo Tab P12TB370FU, Lenovo Tab P11 Pro Gen 2 TB132FU,
Lenovo Tab M8 Gen 4 TB300FU, TB300XU,
Lenovo Tab M9 TB310FU, TB310XC, TB310XU
- Added support for ZTE QCOM phones (EDL mode):
ZTE Grand X View 4 K87CA, K87CC
ZTE Nubia Red Magic 8 Pro NX729J
- Added new loader for:
SM-A526B BIT A
SM-F721U BIT 7
SM-F731U BIT 5
SM-F741U BIT 2
SM-F936U BIT 7
SM-F956U BIT 2
SM-S911U BIT 5
SM-S916U BIT 5
SM-S918U BIT 5
SM-S921U BIT 4
SM-S926U BIT 4
SM-S928U BIT 4
- Added support for Mediatek based phones:
MEDION: S1035X, B4570, B5032, E1051X, X1030X, P72035, X1031X, E1060X,
E4504, E1042X, E1090X, E5004, E1052X
Movitel: Movitel_M9104, M8424, M8415, M8421, M8422, M8419, M8418, M9103, M8420, M9113, M8426
BLU: J8L, S91 Pro
Alcatel: 5033YR
TECNO: TECNO BE6, TECNO KL5, TECNO KA7O
Moolah_Mobile: TAB10
WIKO: W-V730-EEA, c200
NUU: S6003L
VILLAON: V20
FOXXD: T8 Plus
Mobicel: DANDY_ZAM
VIFONE: S6
TCL: T700X, 6156A, 6156D
ZTE: Blade A465
CUBE: U51GT-C8S
Itel: itel S667LN
MobiIoT: MobiGo2P
Safaricom: Vanilla, NEON RAY 2, NEON_NOVA, Kimem Kerefa
- Added support for Unisoc based phones:
DOOGEE: N55
OSCAL: Pad 18
Safaricom: Neon Ray Ultra, Neon Ray Ultra M, NEON_RAY_PRO
Movitel: M9107, M9110, M9101A, M9106, M9109, M8423, M9111, M9108, M9114, M9112, M9116
ZTE: 8550
PHILIPS: S6210
MEGA: 167.83 MB file on MEGA

Add Qualcomm security repair option diagnostic mode or edl mode .. please

 

[gsmbrawn]

Selected model: Honor LGE-NX9 (Honor Magic 4 Pro)
Operation: Read Flash Info
Software version: 7.8
Work ID: 50886284

Waiting for device... OK
Device found at COM18
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 1263880231
Sahara ver: 3
OEM PK HASH: 17CC4A85FE411B14A3CEBC65C729B423ABAF55DF12FDC1BC49FE102660B614C5B265EA64EF2EB77FE88BF575B0B4001E
CPU: 00000000
Vendor: Qualcomm
Prepare loader file... downloading... OK
Loader hash: 55F70EFA7DCB44A0C1DD386A4D7FDC159B198C5F
Loader PK hash: 17CC4A85FE411B14A3CEBC65C729B423ABAF55DF12FDC1BC49FE102660B614C5B265EA64EF2EB77FE88BF575B0B4001E
Loader version: 7.0
Sending loader... OK
FireHose initialization... error(2.1)

 

[muddssar gee]

MTK 6789 NOT SPORTED AT THIS TIME PANDORA BOX TEAM. PLEASE ADD THIS CHIP

 

[muddssar gee]

MUST ADD NEW OPPO VIVO INFINIX TECNO ITEL BRAND PANDORA BOX TEAM THANKS

 

[shamsulhaq]

add more qualcom phone like vivo xoimi redmi oppo

 

[yazide79]

Good update
What about realme note 50
Latest version unlocking regional error firmware version A.54 هل من حل لو سمحت

Good update
What about realme note 50
Latest version unlocking regional error firmware version A.54

ANY SOLLUTION BRO

 

[dany_boy]

Please login to view image

​

Pandora PRO 7.8 Released.
- Added support multi scatter firmwares (TECNO, Infinix ... )
- Added support for Lenovo in Preloader mode:
Lenovo Tab Extreme TB570FU, TB570ZU,
Lenovo Tab P12TB370FU, Lenovo Tab P11 Pro Gen 2 TB132FU,
Lenovo Tab M8 Gen 4 TB300FU, TB300XU,
Lenovo Tab M9 TB310FU, TB310XC, TB310XU
- Added support for ZTE QCOM phones (EDL mode):
ZTE Grand X View 4 K87CA, K87CC
ZTE Nubia Red Magic 8 Pro NX729J
- Added new loader for:
SM-A526B BIT A
SM-F721U BIT 7
SM-F731U BIT 5
SM-F741U BIT 2
SM-F936U BIT 7
SM-F956U BIT 2
SM-S911U BIT 5
SM-S916U BIT 5
SM-S918U BIT 5
SM-S921U BIT 4
SM-S926U BIT 4
SM-S928U BIT 4
- Added support for Mediatek based phones:
MEDION: S1035X, B4570, B5032, E1051X, X1030X, P72035, X1031X, E1060X,
E4504, E1042X, E1090X, E5004, E1052X
Movitel: Movitel_M9104, M8424, M8415, M8421, M8422, M8419, M8418, M9103, M8420, M9113, M8426
BLU: J8L, S91 Pro
Alcatel: 5033YR
TECNO: TECNO BE6, TECNO KL5, TECNO KA7O
Moolah_Mobile: TAB10
WIKO: W-V730-EEA, c200
NUU: S6003L
VILLAON: V20
FOXXD: T8 Plus
Mobicel: DANDY_ZAM
VIFONE: S6
TCL: T700X, 6156A, 6156D
ZTE: Blade A465
CUBE: U51GT-C8S
Itel: itel S667LN
MobiIoT: MobiGo2P
Safaricom: Vanilla, NEON RAY 2, NEON_NOVA, Kimem Kerefa
- Added support for Unisoc based phones:
DOOGEE: N55
OSCAL: Pad 18
Safaricom: Neon Ray Ultra, Neon Ray Ultra M, NEON_RAY_PRO
Movitel: M9107, M9110, M9101A, M9106, M9109, M8423, M9111, M9108, M9114, M9112, M9116
ZTE: 8550
PHILIPS: S6210
MEGA: 167.83 MB file on MEGA

Infinix note 40x 5g MT6835 not supported please add this model

 

[GsmToto]

Selected model: Mediatek Mediatek
Operation: Unlock network
Software version: 7.8

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM4 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x2633F1CE, 0x75FB2BFB, 0xDF817064, 0x77777BD8
Get Chip ID... [MT6765]
Get SOC ID... [2FB4A427E5997F7676CFE98C8E26F0D7D84 EC3D8D3417C8AFCC1F76B7891CA7D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x450100445636C02B8AD163430333201B
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DV4032
EMMC_ID : 0x450100445636C02B8AD163430333201B
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0747C00000 (29,12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0080000000 (2,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : HONOR
Product Manufacturer : HONOR
Product Model : VNA-LX3
Product Name : VNA-LX3
Product Device : HNVNA-M
Product Board : k62v1_64_bsp_2g_ago
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Fri Sep 20 15:06:12 CST 2024
Display ID : VNA-LX3 6.1.0.408
Security Patch : 2024-10-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : mp1k6983v164P682
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Unlock... OK [DF1, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[alimobile279]

need other link

 

[krrishgsm]

just eating our hard money nothing new , free tools available qc frp etc working batter then porndora
mr elang blank starting poo poo pandora for repair and patch realme oppo phones , now fully dead we cant patch new devices , also z3x dead requesting to all friends dont buy that bad products

 

[GsmToto]

Selected model: Tecno KC2 (Tecno Spark 4)
Operation: Erase FRP And Wipe
Software version: 7.8
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES


Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM5 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x72C3DF78, 0x02E01784, 0xFD01443A, 0x17884DE9
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hB8aP>
EMMC_ID : 0x90014A6849C4EC96CB23861503E0362F
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: info not available
DeviceLifeTimeEstB: 30% - 40% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KC2
Product Name : H6113
Product Device : TECNO-KC2
Product Board : TECNO-KC2
Board Platform : mt6761
Build ID : PPR1.180610.011
Build Date : Mon Jul 5 17:54:12 CST 2021
Display ID : KC2-H6113AI-P-210705V320
Security Patch : 2021-07-05
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : AI-210705V320
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KC2%20(Tecno%20Spark%204)/FRP_BACKUP_(2024-11-25_11-21-54)/
Format FRP... [P1] OK
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Wipe data done!

 

[GsmToto]

Selected model: Tecno KD6 (Tecno Spark 5 Air)
Operation: Unlock network
Software version: 7.8


Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x5M3B77CD, 0x04M4AEF7, 0xB7M21CF5, 0x71FF9ME7
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QD63MB
EMMC_ID : 0x1501005144340DA7B36334D4201E210E
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KD6
Product Name : KD6-ZAMT
Product Device : TECNO-KD6
Product Board : TECNO-KD6
Board Platform : mt6761
Build ID : QP1A.190711.020
Build Date : Fri Dec 11 13:14:35 CST 2020
Display ID : KD6-H6116I-QGo-ZAMT-LC-201211V47
Security Patch : 2020-12-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : I-ZAMT-LC-201211V47
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Unlock... OK [DF1, UN]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!

 

[jiten007]

Please login to view image

How to Solve