Z3X Pandora PRO 7.4 / 7.5 Released. New devices functions added

Z3X Team

SPYROS

Product Supporter
Jan 27, 2023
220
645
PK

Pandora PRO 7.4 / 7.5 New devices/functions added.

Added new function:

- Reset Battery (charge cycle count) for Samsung QCOM phones


Added support for Xiaomi phones:

11T Pro Vili
Civi Mona
12 Lite Taoyao
Mi 11 Venus
Mi 11 Ultra Star
Mi Mix Fold Cetus
Poco F2 Pro / Redmi K30 Pro Lmi
Poco X5 Pro 5G Redwood




Added support for Samsung QCOM phones (EDL mode):

- SM-A025U Galaxy A02s (BIT 5)
- SM-A057G Galaxy A05s (BIT 3)
- SM-A235N Galaxy A23 (BIT 5)
- SM-M236L Galaxy Buddy 2 (BIT 6)
- SM-N976U Galaxy Note 10 Plus 5G (BIT 6)
- SM-N981U Galaxy Note 20 5G (BIT 9)
- SM-N986U Galaxy Note 20 Ultra 5G (BIT 9)
- SM-G981U Galaxy S20 5G (BIT A)
- SM-S9280 Galaxy S24 Ultra (BIT 3)
- SM-X210 Galaxy Tab A9 Plus (BIT 3)
- SM-X216B Galaxy Tab A9 Plus (BIT 3)
- SM-F731N Galaxy Z Flip5 5G (BIT 3)
- SM-F946N Galaxy Z Fold5 (BIT 3)
- SM-F956N Galaxy Z Fold6 (BIT 1)


Added support for QCOM based phones (EDL mode):

- LG V60 ThinQ 5G LM-V600, A001LG
- LG G8 ThinQ LM-G820
- LG Velvet 5G LM-G900
- LG V30 H930, H931, H932, H933, VS996, US998, LS998U, LGM-V300L, LGM-V300K, LGM-V300S, LS998, AS998,H932PR, L-01K, H930DS
- Vivo Y71 1724
- Lenovo Tab M10 Plus (3rd Gen) TB128XU
- Lenovo 801LV
- TCL 10 Pro T799B, T799H
- TCL 20 Pro 5G T810H, T810S
- Nothing Phone 1 A063
- Realme 12 4G RMX3871
- Realme C67 4G MX3890


Added new loader for:

- SM-M556B (BIT 3)
- SM-G988U (BIT-A)

Fixed:

- Huawei APP parser (for MTK)

Increased timeout for switching to META


- Added Reset Mi Acc for Xiaomi phones
- Added support for Xiaomi phones:
Redmi Note 7/7S Lavender
Poco M3 Citrus
Redmi Note 9 4G Citrus
Redmi Y3 Onc
Redmi Note 8 Ginkgo
Redmi Note 8T Biloba
- Increased timeout of detection MTK/Unisoc phones (180 sec)
- Updated Unisoc FDL agent for prevent reconfig UFS (and as a consequence erase all memory)
- EDL Loaders removed from installer
- Added support for Samsung phones:
(Write Firmware (XML)*, Read/Write*/Wipe Security, Read Info, Read Partitions,
Wipe Data, Factory Reset, Reset FRP, Change CSC, Repair SN)
SM-G991W Galaxy S21 5G
SM-G996W Galaxy S21 Plus 5G
SM-G998W Galaxy S21 Ultra 5G
SM-F741B Galaxy Z Flip6 5G
SM-F956B Galaxy Z Fold6
- Added new loader for
SM-M556B (BIT 2)
SM-G990U (BIT C)
SM-S711U (BIT 5)
SM-S901U (BIT 6)
SM-S906E (BIT A)
SM-S906U (BIT 6)
SM-S908E (BIT A)
SM-S911B (BIT 6)
SM-S918B (BIT 6)
SM-S928B (BIT 3)
- Added support for Mediatek phones:
Infinix Hot 50i X6531, Infinix Hot 50i X6531B, Infinix Smart 8 Pro X6525B;
TCL 30 5G T776H, TCL 30 5G T776H1, TCL 30 5G T776O, T779W T779WV TCL Stylus, TCL 40 XE T609DL;
Vortex Sync, Synq, T10M, T10M Pro, T10M Pro Plus, Tab8V, Tab10, V22, V22S, V23, V50LTE, Volt, Volt 8, Z22, Z23, ZG65 Pro, ZG65H, Ztab10;
- Added support Unisoc based phones:
SC7731E:
Hisense U605 HS7731ESP
SC9863A:
Infinix Smart 7 Plus X6517RU, Infinix Smart 7 HD X6516RU
Nokia C12 Pro TA-1562 TA-1583, Nokia C32 TA-1534 TA-1558
T606:
Infinix Smart 8 X6525D
Nokia Venom TA-1529
T615:
Tecno Spark Go 1 KL4, KL4s

New Software 7.5

166.72 MB file on MEGA
 
Last edited:

GsmToto

Super Moderator
Jan 1, 2021
4,540
21,068
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Qualcomm Qualcomm
Operation: Erase FRP
Software version: 7.4

Waiting for device... OK
Device found at COM2
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 14691733321
Sahara ver: 2
OEM PK HASH: D40EEE56F3194665577944134CD53CB767E 293D3C404979554109A39267724AE
CPU: SM6115 (Snapdragon 662)
Vendor: Qualcomm
MSM HW ID: 0014D0E100000000
SBL SW Ver: 00000000
Prepare custom loader file... OK
Loader hash: 3B774D60B8896C4DC32B3FEAA11FD83C827290EC
Loader PK hash: 1BEBE3863A6781DB4E9E5CA14971C7C4F4 358EC9D79CDA4692CE5E948C6FD409408F4C919FCADFE3B01086063007334D
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: eMMC
Name: 3V6CAB
Page size: 200
Block size: 200
Partition count: 4
PART0 size: 0x1D1EC00000
PART1 size: 0x0000400000
PART2 size: 0x0000400000
PART3 size: 0x0001000000
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... OK
Product Brand : lge
Product Manufacturer : LGE
Product Model : LM-K735
Product Name : fh50lm
Product Device : fh50lm
Product Board : bengal
Board Platform : bengal
Build ID : RKQ1.201022.002
Build Date : Thu Dec 3 21:45:37 KST 2020
Security Patch : 2020-12-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 2033821469e33
Userdata FS Type : F2FS
Erase FRP... OK
Done!
 

GsmToto

Super Moderator
Jan 1, 2021
4,540
21,068
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Qualcomm Qualcomm
Operation: Backup Security
Software version: 7.4

Waiting for device... OK
Device found at COM13
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 1469173541
Sahara ver: 2
OEM PK HASH: D40EEE56F3194665574107944134CD53CB767E 29AH3D3C404979559A39267724AEDM
CPU: SM6115 (Snapdragon 662)
Vendor: Qualcomm
MSM HW ID: 0014D0E100000000
SBL SW Ver: 00000000
Prepare custom loader file... OK
Loader hash: 3B774D60B889D83C8274DGE0EC6C4DC32B3FEAA11FVG
Loader PK hash: 1BEBE3863A6781DB4B01088742H07334DE9E5CA14971C7C4F4 358EC9D79C543692CE5E948C6FD409408F4C919FCADHM
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: eMMC
Name: 3V6CAB
Page size: 200
Block size: 200
Partition count: 4
PART0 size: 0x1D1EC00000
PART1 size: 0x0000400000
PART2 size: 0x0000400000
PART3 size: 0x0001000000
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... OK
Product Brand : lge
Product Manufacturer : LGE
Product Model : LM-K735
Product Name : fh50lm
Product Device : fh50lm
Product Board : bengal
Board Platform : bengal
Build ID : RKQ1.201022.002
Build Date : Thu Dec 3 21:45:37 KST 2020
Security Patch : 2020-12-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 2033821469e33
Userdata FS Type : F2FS
Backup security...
Read partition "modemst1"... OK
Read partition "modemst2"... OK
Read partition "fsc"... OK
Read partition "fsg"... OK
Done!
 

fm mobile lab

Junior Member
Sep 12, 2024
4
1
mirpurkhas

PANDORA PRO 7.4
- Added Reset Mi Acc for Xiaomi phones
- Added support for Xiaomi phones:
Redmi Note 7/7S Lavender
Poco M3 Citrus
Redmi Note 9 4G Citrus
Redmi Y3 Onc
Redmi Note 8 Ginkgo
Redmi Note 8T Biloba
- Increased timeout of detection MTK/Unisoc phones (180 sec)
- Updated Unisoc FDL agent for prevent reconfig UFS (and as a consequence erase all memory)
- EDL Loaders removed from installer
- Added support for Samsung phones:
(Write Firmware (XML)*, Read/Write*/Wipe Security, Read Info, Read Partitions,
Wipe Data, Factory Reset, Reset FRP, Change CSC, Repair SN)
SM-G991W Galaxy S21 5G
SM-G996W Galaxy S21 Plus 5G
SM-G998W Galaxy S21 Ultra 5G
SM-F741B Galaxy Z Flip6 5G
SM-F956B Galaxy Z Fold6
- Added new loader for
SM-M556B (BIT 2)
SM-G990U (BIT C)
SM-S711U (BIT 5)
SM-S901U (BIT 6)
SM-S906E (BIT A)
SM-S906U (BIT 6)
SM-S908E (BIT A)
SM-S911B (BIT 6)
SM-S918B (BIT 6)
SM-S928B (BIT 3)
- Added support for Mediatek phones:
Infinix Hot 50i X6531, Infinix Hot 50i X6531B, Infinix Smart 8 Pro X6525B;
TCL 30 5G T776H, TCL 30 5G T776H1, TCL 30 5G T776O, T779W T779WV TCL Stylus, TCL 40 XE T609DL;
Vortex Sync, Synq, T10M, T10M Pro, T10M Pro Plus, Tab8V, Tab10, V22, V22S, V23, V50LTE, Volt, Volt 8, Z22, Z23, ZG65 Pro, ZG65H, Ztab10;
- Added support Unisoc based phones:
SC7731E:
Hisense U605 HS7731ESP
SC9863A:
Infinix Smart 7 Plus X6517RU, Infinix Smart 7 HD X6516RU
Nokia C12 Pro TA-1562 TA-1583, Nokia C32 TA-1534 TA-1558
T606:
Infinix Smart 8 X6525D
Nokia Venom TA-1529
T615:
Tecno Spark Go 1 KL4, KL4s
vivo 2024 sec ......
 
  • Like
Reactions: 9460252444m

dany_boy

Active Member
Oct 28, 2017
95
12
Pakistan punjab
Skype
[email protected]
Selected model: Qualcomm Qualcomm
Operation: Erase FRP
Software version: 7.4

Waiting for device... OK
Device found at COM2
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 14691733321
Sahara ver: 2
OEM PK HASH: D40EEE56F3194665577944134CD53CB767E 293D3C404979554109A39267724AE
CPU: SM6115 (Snapdragon 662)
Vendor: Qualcomm
MSM HW ID: 0014D0E100000000
SBL SW Ver: 00000000
Prepare custom loader file... OK
Loader hash: 3B774D60B8896C4DC32B3FEAA11FD83C827290EC
Loader PK hash: 1BEBE3863A6781DB4E9E5CA14971C7C4F4 358EC9D79CDA4692CE5E948C6FD409408F4C919FCADFE3B01086063007334D
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Get storage info... OK
Storage info:
Type: eMMC
Name: 3V6CAB
Page size: 200
Block size: 200
Partition count: 4
PART0 size: 0x1D1EC00000
PART1 size: 0x0000400000
PART2 size: 0x0000400000
PART3 size: 0x0001000000
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... OK
Product Brand : lge
Product Manufacturer : LGE
Product Model : LM-K735
Product Name : fh50lm
Product Device : fh50lm
Product Board : bengal
Board Platform : bengal
Build ID : RKQ1.201022.002
Build Date : Thu Dec 3 21:45:37 KST 2020
Security Patch : 2020-12-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 2033821469e33
Userdata FS Type : F2FS
Erase FRP... OK
Done!
We are still waiting for Vivo 2024 security solution please give us
 

GsmToto

Super Moderator
Jan 1, 2021
4,540
21,068
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: ATT U319AA (ATT Calypso 2)
Operation: Unlock network
Software version: 7.4

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E7]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x2C008F0C, 0xD0E746B9, 0xFFA80001, 0xB2F33F34
Get Chip ID... [MT6761]
Get SOC ID... [40EF6A0E5EFD7967F1664035497F5EA CDCF825C318FD760E5224C2B04A49086A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x880103534CA48262A88094433324755C
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: SLD32G
EMMC_ID : 0x880103534C4A48262A8809433324755C
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x073A000000 (28.91Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: info not available
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : ATT
Product Manufacturer : TINNO
Product Model : U319AA
Product Name : U319AA
Product Device : U319AA
Product Board : U319AA
Board Platform : mt6761
Build ID : RP1A.200720.011
Build Date : Thu Apr 28 05:26:00 CST 2022
Display ID : RP1A.200720.011 release-keys
Security Patch : 2022-04-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 460
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read security files... OK
Read NVDATA files... OK
Read IMEI... OK
Unlock... OK [DF1, DF2, GB1, GB2]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
 

aliipi

Friend's Martview
Oct 28, 2019
141
39

PANDORA PRO 7.4
- Added Reset Mi Acc for Xiaomi phones
- Added support for Xiaomi phones:
Redmi Note 7/7S Lavender
Poco M3 Citrus
Redmi Note 9 4G Citrus
Redmi Y3 Onc
Redmi Note 8 Ginkgo
Redmi Note 8T Biloba
- Increased timeout of detection MTK/Unisoc phones (180 sec)
- Updated Unisoc FDL agent for prevent reconfig UFS (and as a consequence erase all memory)
- EDL Loaders removed from installer
- Added support for Samsung phones:
(Write Firmware (XML)*, Read/Write*/Wipe Security, Read Info, Read Partitions,
Wipe Data, Factory Reset, Reset FRP, Change CSC, Repair SN)
SM-G991W Galaxy S21 5G
SM-G996W Galaxy S21 Plus 5G
SM-G998W Galaxy S21 Ultra 5G
SM-F741B Galaxy Z Flip6 5G
SM-F956B Galaxy Z Fold6
- Added new loader for
SM-M556B (BIT 2)
SM-G990U (BIT C)
SM-S711U (BIT 5)
SM-S901U (BIT 6)
SM-S906E (BIT A)
SM-S906U (BIT 6)
SM-S908E (BIT A)
SM-S911B (BIT 6)
SM-S918B (BIT 6)
SM-S928B (BIT 3)
- Added support for Mediatek phones:
Infinix Hot 50i X6531, Infinix Hot 50i X6531B, Infinix Smart 8 Pro X6525B;
TCL 30 5G T776H, TCL 30 5G T776H1, TCL 30 5G T776O, T779W T779WV TCL Stylus, TCL 40 XE T609DL;
Vortex Sync, Synq, T10M, T10M Pro, T10M Pro Plus, Tab8V, Tab10, V22, V22S, V23, V50LTE, Volt, Volt 8, Z22, Z23, ZG65 Pro, ZG65H, Ztab10;
- Added support Unisoc based phones:
SC7731E:
Hisense U605 HS7731ESP
SC9863A:
Infinix Smart 7 Plus X6517RU, Infinix Smart 7 HD X6516RU
Nokia C12 Pro TA-1562 TA-1583, Nokia C32 TA-1534 TA-1558
T606:
Infinix Smart 8 X6525D
Nokia Venom TA-1529
T615:
Tecno Spark Go 1 KL4, KL4s
Selected model: Tecno CK7n (Tecno Camon 20 Pro)
Operation: Repair
Software version: 7.4

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM25 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1208
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6789]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xCDC64713, 0x45649D4E, 0x9AE36242, 0x2462DB12
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... error(DA_INIT_KEY_FAIL). Secure DA agent not compatible for this preloader.
Try select other DA type.
 

GsmToto

Super Moderator
Jan 1, 2021
4,540
21,068
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Vortex ZTAB10
Operation: Erase FRP
Software version: 7.4

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1304.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x15DFD2BE, 0xE0879DA4, 0xB8182C8E, 0xB3F56823
Load DownloadAgent... OK
Search DA... OK [21]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: RX14MB
EMMC_ID : 0x150100525831344C6218495D4207C2AD
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Vortex
Product Manufacturer : Vortex Cellular
Product Model : ZTAB10
Product Name : Vortex_ZTAB10
Product Device : ZTAB10
Product Board : tb8766p1_64_bsp
Board Platform : mt6761
Build ID : TP1A.220624.014
Build Date : Fri Aug 4 16:58:47 CST 2023
Display ID : Vortex_VT_V2.0_20230804
Security Patch : 2023-08-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 1691131384
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vortex_ZTAB10/FRP_BACKUP_(2024-9-18_07-22-54)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!
 

GsmToto

Super Moderator
Jan 1, 2021
4,540
21,068
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno BG7 (Tecno Spark 20C)
Operation: Eliminar FRP
Software version: 7.4

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xC0AD35E3, 0x8994C16D 0xEF46868G, 0x7B44E06D
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: C09G00
EMMC_ID : 0xD62D004330394730305122FB7ADFCASM
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x3A4BB00000 (233,18Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO BG7
Product Name : BG7-OPPJ
Product Device : TECNO-BG7
Product Board : TECNO-BG7
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Thu Aug 8 17:17:51 CST 2024
Display ID : TECNO-T-64-240808V90
Security Patch : 2024-07-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 240808V107
Userdata FS Type : F2FS
Switch to BROM
Read partition "preloader"... OK
Read partition "preloader_backup"... OK
Parse scatter file... OK
Load Rom Images... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0766
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xC0AD35E3, 0x8994C16G, 0xEF46868G, 0x7B44E06D
Get Chip ID... [MT6765]
Get SOC ID... [A035E0504B642D13569EE16787E038E5CBF0F1100628AE56ED D0C0D20604E1D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD62D004330394730305122FB7ADFCA22SM
Load EMI from file... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: C09G00
EMMC_ID : 0xD62D004330394730305122FB7ADFCA22SM
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x3A4BB00000 (233,18Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Restore parts:
Write file "preloader_bg7_xe674s.bin"... OK
Write file "preloader_bg7_xe674s_backup.bin"... OK
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_BG7%20(Tecno%20Spark%2020C)/FRP_BACKUP_(2024-9-20_17-34-22)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!
 

GsmToto

Super Moderator
Jan 1, 2021
4,540
21,068
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Motorola Mediatek
Operation: Read Flash Info
Software version: 7.4
Work ID: 31431632

Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0335
Get sec config... OK [00000001]
Active sec flags: [SBC]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6735]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0xD7657B53, 0x3143E72A, 0x751632AD, 0xAFE58C2C
Get BROM version... OK
Search DA... OK [30]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Checking bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x90014A4537E8A6D6B54184147346132A
Load EMI from phone... OK
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_CNAME: HAG4a2
EMMC_ID : 0x90014A48537E8A6D6B4414147346132A
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x03AB400000 (14,68Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128,00Kb)
EXT_RAM : 0x0080000000 (2,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: Exceeded its maximum estimated device life time
Checking USB status... USB_FULL_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : motorola
Product Manufacturer : motorola
Product Model : Moto E (4) Plus
Product Name : nicklaus_retail
Product Device : nicklaus
Board Platform : mt6737m
Build ID : NMA26.42-162-1
Build Date : Fri Mar 15 06:45:49 CDT 2019
Security Patch : 2018-08-05
Version SDK : 25
Version Release : 7.1.1
Version Codename : REL
Firmware Version : 1
Read Flash Info done!
 

HILDA

Junior Member
Jun 29, 2020
4
2
DAR ES SALAAM
PLEASE Z3X TEAM, this is the fourth time taking my credits yet the job not done have tried to claim several time but i get no reply from any one. please refund this
 

Attachments

  • NOT DONE.txt
    6.8 KB · Views: 9

HILDA

Junior Member
Jun 29, 2020
4
2
DAR ES SALAAM
This device not unlocked please refund my credits to my account zsc_yANqZbXi.

Selected model: Samsung SM-A037U (Samsung Galaxy A03s)
Operation: Unlock network (Server)
Software version: 7.4

Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits. Continue? Yes
Searching Samsung modem... detected COM89
Reading phone info... OK
Model: SM-A037U
AP version: A037USQS3BVI2
CSC version: A037UOYN3BVI2
CP version: A037USQS3BVI2
OS version: 12
Product code: XAA
Carrier ID: XAA
Phone SN: R9TW101Q5TY
Unique number: W154758300A0820710C9
IMEI: 355151134617127
IMEI Certi: PASS
Powering off... OK
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM15 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... timeout


Selected model: Samsung SM-A037U (Samsung Galaxy A03s)
Operation: Unlock network (Server)
Software version: 7.4

Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits. Continue? Yes
Searching Samsung modem... detected COM89
Reading phone info... error (0)


Selected model: Samsung SM-A037U (Samsung Galaxy A03s)
Operation: Unlock network (Server)
Software version: 7.4

Checking Login and Password... OK
Balance: 25 crd.
You have 25 credit(s) left. This operation takes 5 credits. Continue? Yes
Searching Samsung modem... detected COM89
Reading phone info... OK
Model: SM-A037U
AP version: A037USQS3BVI2
CSC version: A037UOYN3BVI2
CP version: A037USQS3BVI2
OS version: 12
Product code: XAA
Carrier ID: XAA
Phone SN: R9TW101Q5TY
Unique number: W154758300A0820710C9
IMEI: 355151134617127
IMEI Certi: PASS
Powering off... OK
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM15 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM16 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Install LibUSB... OK
Waiting for device... OK
Open port... OK
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM16 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xBBF92D71, 0x777EBE54, 0x071E37B1, 0xBC707D3E
Get Chip ID... [MT6765]
Get SOC ID... [9BCEF809D2D1E0B0C4F6F53A4080164EF6A615C919287E67C66C9AF071EB9CB8]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x15010047583642414200A0820710C9D7
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: GX6BAB
EMMC_ID : 0x15010047583642414200A0820710C9D7
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A037U
Product Name : a03susq
Product Device : a03su
Product Board : a03su
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Fri Sep 30 20:32:34 KST 2022
Display ID : SP1A.210812.016.A037USQS3BVI2
Security Patch : 2022-10-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : A037USQS3BVI2
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Calculating... OK
Read lock info... OK
Searching server... OK
Waiting for server answer... OK
Unlocking ... [1] ... OK
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
 

GsmToto

Super Moderator
Jan 1, 2021
4,540
21,068
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Tecno KJ5 (Tecno Spark 20)
Operation: Eliminar FRP
Software version: 7.4

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x4881FE52, 0xBE1C041E, 0xFD848545, 0x91CB64A8
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC256
EMMC_ID : 0xD62D004D4D4338289A7523536511513D
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x3A40A00000 (233,01Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO
Product Model : TECNO KJ5
Product Name : KJ5-OP
Product Device : TECNO-KJ5
Product Board : TECNO-KJ5
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Mon Jul 22 16:13:37 CST 2024
Display ID : TECNO-T-64-240722V1145
Security Patch : 2024-07-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 240722V1315
Userdata FS Type : F2FS
Switch to BROM
Read partition "preloader"... OK
Read partition "preloader_backup"... OK
Parse scatter file... OK
Load Rom Images... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Connect phone to [BOX] in BROM mode
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0707
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Release testpoint
Advanced Bypass Security... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x4881FE52, 0xBE1C041E, 0xFD848545, 0x91CB64A8
Get Chip ID... [MT6768]
Get SOC ID... [FBD8B2D865985145E56122349E9EA84AD7 9D7A8764C02DC80F8746557E1534CA]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD62D004D4D43328289A753536511513D
Load EMI from file... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: MMC256
EMMC_ID : 0xD62D004D4D43328289A753536511513D
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0000400000 (4,00Mb)
EMMC_USER : 0x3A40A00000 (233,01Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Restore parts:
Write file "preloader_kj5_h6931.bin"... OK
Write file "preloader_kj5_h6931_backup.bin"... OK
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KJ5%20(Tecno%20Spark%2020)/FRP_BACKUP_(2024-9-21_12-33-56)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!
 

GsmToto

Super Moderator
Jan 1, 2021
4,540
21,068
UK
Skype
gsmtoto
Sonork ID
100.1684601
Selected model: Vortex ZG65
Operation: Unlock network
Software version: 7.4

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM7 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CC00, SW VER: 0002, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x4DA509S5, 0x2A67799F, 0x142CF276, 0xFD6F3433
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [1]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: HBG4a2
EMMC_ID : 0x90014A4852500124792F54247346132A
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Vortex
Product Manufacturer : Vortex
Product Model : ZG65
Product Name : ZG65
Product Device : ZG65
Product Board : k39tv1_bsp_1g_k419
Board Platform : mt6739
Build ID : SP1A.210812.016
Build Date : Sat Sep 9 12:55:33 CST 2023
Display ID : Vortex_ZG65_V01_20230909
Security Patch : 2023-09-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20236745
Userdata FS Type : F2FS
Read security partition from phone... OK
Read security files... OK
Read NVDATA files... OK
Calculating... OK
Read lock info... OK
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read security files... OK
Read NVDATA files... OK
Read IMEI... OK
Unlock... OK [DF1, DF2, GB1, GB2]
Write lock info... OK
Write security partition to phone... OK
Network Unlock done!
 

GsmToto

Super Moderator
Jan 1, 2021
4,540
21,068
UK
Skype
gsmtoto
Sonork ID
100.1684601
elected model: Infinix X688B (Infinix Hot 10 Play)
Operation: Erase FRP
Software version: 7.4


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xCACFA332, 0x7D1D43EC, 0xA4AB9DE5, 0xF1789DD1
Get Chip ID... [MT6765]
Get SOC ID... [1D7329E122D09EA1C3800EFBAFL108E37990104E547NF396D CA3E5C379A65FX]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x1501004D03644414N2EF96D2FB48BX
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DP6DAB
EMMC_ID : 0x1501004450364H414202EF96D2GB48X
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 20% - 30% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX MOBILITY LIMITED
Product Model : Infinix X688B
Product Name : X688B-GL
Product Device : Infinix-X688X
Product Board : Infinix-X688X
Board Platform : mt6765
Build ID : QP1A.190711.020
Build Date : Mon Apr 19 20:06:04 CST 2021
Display ID : INFINIX-Q-64-210413V333
Security Patch : 2021-04-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : 210419V333
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X688B%20(Infinix%20Hot%2010%20Play)/FRP_BACKUP_(2024-9-23_10-54-22)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!
 
Top