Z3X Pandora Pro 7.10/ 7/.11 Download Release

[SPYROS]

Pandora 7.11. Release

Please login to view image

Fixed bug with flashing Mediatek phones (Signature(Entity) invalid)

Please login to view image

Added support Samsung phones:
- Galaxy F23 SM-E236B (BIT

Please login to view image

- Galaxy M52 5G SM-M526B (BIT 5)
- Galaxy Tab S8 Ultra SM-X900 (BIT 9)
- Galaxy S23 Ultra SCG20 (BIT 1)

Please login to view image

Added new loader for Samsung:
- SM-A025A BIT 8
- SM-A057G BIT 5
- SM-A057M BIT 7
- SM-A235F BIT 9
- SM-A235M BIT 9
- SM-A236B BIT 9
- SM-A236E BIT 9
- SM-A426B BIT 8
- SM-G780G BIT D
- SM-G781B BIT E
- SM-G990B BIT B
- SM-M145F BIT 6
- SM-N986U BIT A
- SM-S908N BIT 6
- SM-S918B BIT 7

Please login to view image

Added support for Mediatek based phones:
- Condor: SP661, PAM524, TB109L, TB108W, TFX714L, Griffe T7, PGN517, Plume L5 Pro, Plume L2 Pro, SP531, SP659, Plume L1, Infinity E5, TFX712G, TB105L, Plume L5, PKT-301, Infinity e5 pro, PGN-404, Plume L3 Smart, Plume L8 Pro, Plume L6 Pro, PGN-507, Plume P8 Pro, Allure M3 Lite, Griffe T8 Plus, Allure A8 Pro, TFX713L, PGN610, PGN513, PGN522, Allure M1, PGN606, TMK715L
- MobiWire: MobiPrint, Vodafone Pro 4G, SmartT23, V Lite 2, Hotah,
- Wintouch: K716, M704, K81Pro, K13, Q75S, K77, K717, K702, K81, K713, K12Pro, K701, M13, K718, M718, Q75X, M99, K11
- WALTON: Primo NF+, Primo G8, WALPAD8G, Walpad_10H, Primo H8, Walpad_G2, Primo GH9, Primo HM5, PRIMO N4, Primo H7s, Primo H6+, RX7 Mini, NEXG_N10, Primo GF3, Primo_RH2, Primo RM2, k200_1g, Primo NH2, Primo H9 Pro, Primo GH11, Primo H4, PRIMO S8. Primo H7. NEXG N9, Primo H10,XANON X20, Orbit Y50, XANON X90, Primo NH3 Lite, Primo RX7, Primo G7+, Primo S7, Primo HM4+, Primo NH Lite, Primo GM2 Plus, Primo N5, PRIMO RX8, PRIMO RX9,, Primo R5 Plus, Primo NF2, Primo E10, Primo NH, Primo GM2, Primo HM4i, k300, Primo ZX4, Primo NX2, Primo RM2 mini, Primo R9, Primo F6, Primo S3 mini, Primo GM3, Walpad G3, Primo E10 Plus, Primo EF9, Primo GH5 mini, WALPAD 10P, k510, Primo NH5, Primo F7, Primo GH6, Primo GH6+, Primo E11, Primo GF7, Primo NH4, Primo NH3, Primo D10, Primo R5, Primo GH7i, Primo N3, Primo NF4 2GB, Primo F7s,
- KGTEL: X5, R10
- Gtel: SL8, A718 Xplora Plus, Gtel X6pro, Gtel X7plus, Gtel X6s, Gtel Infinity X, A7155_X4_mini, A770_SL8_Pro, Gtel Vivo4, MX4, Gtel_X5pro, Gtel X6plus, Mx6, A704i Inspire-S, A715_Inspire_One, A7150_X4, A728_XP2, A770_XL7, Gtel_X5mini, Gtel_X5s, A737_XploraZ, Gtel Vivo PLUS, A7101_X3_mini, A713_Vivo_Pro, Gtel Infinity 8s, Gtel_X7pro, Gtel Infinity Alpha, Infinity_13, Delta_14, Gtel Infinity 9

Please login to view image

Added support for Unisoc based phones:
- Condor: Infinity a4, Griffe T9, Plume L4. Infinity e4, Griffe T8, Griffe T5
- MobiWire: IKOSORA+, H6682, Kicka 5 Plus 4G, V Pro 2, Halona, Airtel Imagine, Moov Smart Pro, H5111L, Awadjidje, Smart 1
- WALTON: ORBIT Y12, NEXG N71 Plus, NEXG N8, Primo R6 Max, NEXG N74, NEXG N71, NEXG N72, NEXG N70, NEXG N26, Primo GH10i, PRIMO F10, ORBIT Y21, NEXG N25, ORBIT Y70, NEXG N6, NEXG N73, ORBIT Y70c, Gtel_X7s, Gtel_Mx5, Primo H8 Pro, Primo H9, Primo HM7, Primo GH10, PRIMO EF10, Primo R6, Primo G9, Primo E12, Primo EF8 4G, y400, Primo G8i, Primo EM2, Primo HM6, Primo R10,
- KGTEL: X55E, A56

new download software
MEGA: https://mega.nz/file/GXgxkKSZ...

 

[gsmbrawn]

PLS Add LGE-NX9 serie

 

[muddssar gee]

very good up date nice work good team

 

[goudio]

A15 A155F U2 FRP IS SUPPORTED

 

[000nothing111]

Please login to view image

- Added support Infinix phones:

Infinix Hot 50 4G X6532, Infinix Xpad X1101, X1101B,

Infinix Note 40S X6850B, Infinix Hot 50 Pro X6881,

Infinix Hot 50 X6882, X6882B, Infinix Zero Flip 5G, X6962,

Infinix Hot 50 Pro Plus X6880, Infinix Note 40 Pro 4G X6850,

Infinix Note 40 X6853, Infinix Zero 40 4G X6860

Infinix Hot 50 5G X6720, X6720B,

Infinix Note 40X 5G X6838, Infinix Note 40 Pro 5G X6851,

Infinix Note 40 Pro Plus 5G X6851B, Infinix Note 40 5G X6852,

Infinix Zero 40 5G X6861, Infinix GT 20 Pro X6871.




- Added support Tecno phones:

CL9 Tecno Camon 30 Premier, CL8 Tecno Camon 30 Pro,

KJ6, KJ6s Tecno Spark 20 Pro, CLA5 Tecno Camon 30S,

KL7 Tecno Spark 30 Pro, T1101 Tecno MegaPad 11,

KJ8 Tecno Spark 20 Pro 5G, KJ7, KJ7s Tecno Spark 20 Pro Plus,

CL6, CL6k, CL6s Tecno Camon 30, CLA6 Tecno Camon 30s Pro,

LI7 Tecno Pova 6, LI6 Tecno Pova 6 Neo,

KL8, KL8s Tecno Spark 30 5G, KL8h Tecno Spark 30C 5G,

CL7, CL7k, CL7s Tecno Camon 30 5G, CK8nB Tecno Camon 20s Pro 5G,

AE11 Tecno Phantom V Flip 2, AE10 Tecno Phantom V Fold 2

KL4hTecno Spark Go 1S, KL5, KL5n, KL5sTecno Spark 30C,

KL6 Tecno Spark 30, T1001 Tecno MegaPad 10.




- Added support Samsung phones:

Galaxy A15 SM-A155F,

Galaxy A05 SM-A055F,

Galaxy A06 SM-A065F/SM-A065M





- Added new loaders for QCOM phones (EDL mode)

- Added new loader for Samsung:

SM-A2070 BIT 5

SM-M236L BIT 9

SM-S928B BIT 4





- Added support for Mediatek based phones:

Alcatel:

6025H, 9309X, 6025A, 5033MP, 8094X, 6002A, 8091, 9317G, 5033FR, 6025D, 6056A,

5033E, 9032X, 5028A, 9013T, 6027A, 5061U, 6056D, 9317X, 6065A, 8094M, 9009F,

9013A, 5007S, 6002D, 5033EP, 5007O, 4063A, 8092, 6056H, 5031D, 5031G, 9317G1,

8052, 5033FP, 5033Q, 6002J, 9032W,



Dexp:

G150, S190, G450 2021, ES1050, G155, MS550, M210



TCL:

T676H, T507J, 6165A, 5164D, T431D, T501C, 9295G, 5044T, 8082, 4058G, 5199I,

5033M, T433D, 5099U, 5058Y, 5058A, 5041C, T431Q, 9460G, 8094M, 5033TP, 8192A,

T431U, 8193A, T771K, T771A, 6062W, 5107G, 5033F, 9080G, 5033E, T767G, T701DL,

T430W, 6127I, 5164A, T431A, T501L, 6165S, 4058W, 6165H, 6127A, T766A, 6102A



FOSSiBOT:

F106 Pro, J12, F105, F101 Pro, DT2, F101, F102, F101 P


LeEco:

Honor 10, Spark 8, LEX620, mate60pro, LEX626, MX710, LEX622, S10, LEX657, LEX653



Orange:

Orange Neva start, Orange Rise32, K2, Orange Nola play, Orange Rise 55


- Added support for Unisoc based phones:

Alcatel:

5030I, 5030J



Dexp:

C37, B31, K11, B18, y400, B38, K21



Orange:

Orange Sanza touch, Orange Nola fun, Orange Nola XL

Download New Software

169.72 MB file on MEGA

I think mr blang are making big plan for monster update...2025 is coming

 

[taufeek khan]

Vivo ka kab karoge z3x team

 

[Barm1993]

Buen update equipo. Por favor agreguen cargadores para serie Vivo mtk seguridad 2024

 

[GsmToto]

elected model: Lg K500UM (Lg K51)
Operation: Erase FRP
Software version: 7.10


Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [LG Electronics Inc.,UsbDiag,LGE Mobile USB Serial Port,lgx64diag.sys,5.1.0.0]
You are using driver version 5.1.0.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK

 

[imran999]

RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0180000000 (6.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : M2006C3MII
Product Name : cattail
Product Device : cattail
Product Board : cattail
Board Platform : mt6765
Build ID : RP1A.200720.011
Build Date : Fri Jul 15 17:51:04 CST 2022
Display ID : RP1A.200720.011
Security Patch : 2022-07-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : V12.5.6.0.RCTINXM
Userdata FS Type : F2FS
Read partition "nvdata"... OK
Read partition "protect1"... OK
Read partition "nvram"... OK
Read NVDATA files... OK
Read NVRAM files... OK
Read security files... OK
Calculating... OK
Read IMEI... OK
IMEI 1: 86484610........
IMEI 2: 86484610........
Repairing IMEI...
IMEI 1: 864446,,,,,,,,
IMEI 2: 864446100.....
Write IMEI and patch CERT [NVDATA]... OK
Load partiton for patching... [Nov 2024] ... error(3.1)



Selected model: Xiaomi Redmi 9A (Dandelion)
Operation: Repair
Software version: 7.10

 

[aliipi]

Selected model: Tecno KJ5 (Tecno Spark 20)
Operation: Erase FRP
Software version: 7.10
Work ID: 53564402

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM11 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xF5C83692, 0x801FC07A, 0x51754769, 0x291DCA87
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)

24-10-9 security fail

 

[GsmToto]

Selected model: Tecno KJ8 (Tecno Spark 20 Pro 5G)
Operation: Read PTT
Software version: 7.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x7BE90C09, 0xCA272079, 0x91E634B2, 0x16AFD1EE
Load DownloadAgent... OK
Search DA... not found
Advanced Authorization (Preloader) not supported for this CPU

 

[GsmToto]

Selected model: ZTE 7060 (ZTE Blade V50 Smart)
Operation: Repair
Software version: 7.10


Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM3
Port: USB\VID_1782&PID_4D00\5&136F0554&0&2
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T616_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: HS6063448A41090865467
Flash Type: EMMC
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : ZTE
Product Manufacturer : ZTE
Product Model : ZTE 7060
Product Name : P606F07_1
Product Device : P606F07
Product Board : ums9230_1h10
Board Platform : ums9230
Build ID : TP1A.220624.014
Build Date : Tue Oct 24 04:56:18 CST 2023
Display ID : MyOS13.0.2_7060_AS
Security Patch : 2023-10-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : 20231024.035453
Userdata FS Type : F2FS
Load NVD... OK
Read IMEI... OK
Current IMEI:
IMEI 1:
IMEI 2:
Repaired IMEI:
IMEI 1: 861
IMEI 2: 861
Write IMEI... OK
Save NVD... OK
Done!

 

[GsmToto]

Selected model: Huawei MRD-LX1F (Huawei Y6 Pime)
Operation: Erase FRP
Software version: 7.10


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF85BKB52, 0x19EAK385, 0x7AB89F8K, 0x7C9E1D8A
Get Chip ID... [MT6761]
Get SOC ID... [D06A4286K8088EFC16AGF32F8K2DCA001814FBBS3881415160 70F5028293D0FS]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x1501000688C639514436334D4201843E
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QD63MB
EMMC_ID : 0x1501005140688C639436334D4201843E
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 50% - 60% device life time used
DeviceLifeTimeEstB: 50% - 60% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... error(0)
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Huawei_MRD-LX1F%20(Huawei%20Y6%20Pime)/FRP_BACKUP_(2024-12-17_20-33-54)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Samsung SM-A055F (Galaxy A05)
Operation: Erase FRP
Software version: 7.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.8.1564.3]
Device found at COM3[PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x49C46F79, 0x9209CC52, 0x5755E5F3, 0xED868505
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
DA2 auth: disbled
Get device info... OK
EMMC INFO:
EMMC_CNAME: DC6DMB
EMMC_ID : 0x1501004076AB97AE344336444D42003C
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A055F
Product Name : a05mxx
Product Device : a05m
Product Board : a05m
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Fri Oct 11 15:08:17 KST 2024
Firmware Version : A055FXXS7CXJ7
Userdata FS Type : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A055F%20(Galaxy%20A05)/FRP_BACKUP_(2024-12-18_8-25-33)/
Format FRP... [P1] [P2] OK
Writting FRP data... error(STATUS_SEC_WRITE_DATA_NOT_ALLOWED)

 

[GsmToto]

Selected model: Tecno KJ5 (Tecno Spark 20)
Operation: Erase FRP
Software version: 7.10


Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1511.0]
You are using driver version 3.0.1511.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM4 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x626FCD56, 0xA842CBC8, 0x1876D262, 0x78C7D50A
Load DownloadAgent... OK
Search DA... OK [4]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)

 

[GsmToto]

Selected model: SKY Devices Mediatek
Operation: Restore From Backup
Software version: 7.10

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Host Power Off... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Waiting for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0717
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Get sec config... OK [00000000]
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xFA3F6AA6, 0x15370EAB, 0x596F5DCF, 0x91F0D235
Get Chip ID... [MT6761]
Get SOC ID... [2E63AFF32D1487BDA998540586A1F8C411FD686EF8D35F6F87F440BB7655387 D]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK

 

[GsmToto]

Selected model: Infinix X6851 (Infinix Note 40 Pro 5G)
Operation: Erase FRP
Software version: 7.10



Get device info... OK
UFS CID (FW VER): KM8F9001JM-B813 ()
Send 2nd DA... OK
DA2 auth: enabled
Get device info... OK
UFS INFO:
UFS_CID : KM8F9001JM-B813
UFS_FWVER :
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x3B96000000 (238.34Gb)
[EFUSE INFO]: BROM not disabled
[EFUSE INFO]: BROM SLA disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX
Product Model : Infinix X6851
Product Name : X6851-OP
Product Device : Infinix-X6851
Product Board : mgvi_64_armv82
Board Platform : common
Build ID : SP1A.210812.016
Build Date : Sat Oct 12 23:22:58 CST 2024
Display ID : INFINIX-U-64-ARMV82-241012V2571
Security Patch : 2024-10-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 241012V2847
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X6851%20(Infinix%20Note%2040%20Pro%205G)/FRP_BACKUP_(2024-12-21_9-22-21)/
Format FRP... [P1] OK
Fix TOOL DL Image error... OK
Erase FRP done!

 

[GsmToto]

Selected model: Vivo V2116 (Vivo V23e)
Operation: Erase FRP
Software version: 7.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 1066
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6781]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xF8A5EFA7, 0x3C8853DF, 0x638E851C, 0x0F14DE7E
Load DownloadAgent... OK
Search DA... OK [5]
Send bootloader... error(DA_IN_BLACKLIST)

 

[GsmToto]

Selected model: Vivo Mediatek
Operation: Erase FRP
Software version: 7.10


Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM3 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 6580
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6580]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 6580
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6580]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0x7BB602AE, 0x8D61653F, 0x645EB2D6, 0x74A224D0
Get BROM version... OK
Search DA... OK [26]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Checking bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x4E0301432015A356848864726143A98E
Load EMI from phone... OK
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_CNAME: NCard
EMMC_ID : 0x8801034E98456A3154361726420438EA
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x039D000000 (14.45Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek DA USB VCOM (Android),usb2ser.sys,3.0.1504.0]
High Speed USB detected at COM0
Open port... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : QTab
Product Manufacturer : QTab
Product Model : V100
Product Name : QTab_V100
Product Device : QTab_V100
Product Board : V100
Board Platform : mt6580
Build ID : MRA58K
Build Date : Mon Sep 12 17:46:24 CST 2016
Display ID : QTab_V100_MP_13_09_V06
Security Patch : 2016-09-05
Version SDK : 23
Version Release : 6.0
Version Codename : REL
Firmware Version : 1473673341
Read partition frp... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_MT6580/FRP_BACKUP_(2024-12-24_21-33-54)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: OPPO CPH2185 (OPPO A15)
Operation: Erase FRP
Software version: 7.10


Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x76EA4B04, 0x5564494F, 0x1A606F57, 0x1548380B
Get Chip ID... [MT6765]
Get SOC ID... [3435018BAD22214131274257F18E150A4C472A5073D652F96A A5847237C05000]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90012DF0B7B54A68423861503E03008B
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hB8aP>
EMMC_ID : 0x900142DF0B7B5A68423861503E03008B
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: info not available
DeviceLifeTimeEstB: 20% - 30% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : CPH2185
Product Device : OP4F2F
Product Board : oppo6765
Board Platform : mt6765
Build ID : QP1A.190711.020
Build Date : Thu Feb 22 00:44:37 CST 2024
Display ID : CPH2185_11_A.69
Security Patch : 2023-02-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/OPPO_CPH2185%20(OPPO%20A15)/FRP_BACKUP_(2024-12-25_10-5-55)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!