Z3X Pandora PRO 6.9 Update. New devices added.

[SPYROS]

Pandora PRO 6.9 Update. Lot of new devices added.

Added support ONN phones:

- 100003561 ONN 8 Pro, 100003562 ONN 10.1 Pro, 100005206 ONN 7, 100005207 ONN 8, 100005208 ONN 10.1,
- 100005209 ONN 10.1, 100011885 ONN 8 Gen 2, - 100011886 ONN 10.1 Gen 2, 100015685 ONN 7 Gen 2,
- 100026191 ONN 7 Gen 2, 100043279 ONN 11.6 Pro, 100044018G ONN 8 Kids, 100044018P ONN 8 Kids,
- 100071481 ONN 7 Gen 3, 100071483 ONN 8 Gen 3, 100071485 ONN 10.1 Kids, 100092988 ONN 7 Kids,
- 100092980 ONN 10.1 Gen 3, 100110027 ONN 11 Pro, 100110603 ONN 10.4 Pro.


Added support Hisense phones:

- HLTE220E Hisense E30, HS6737MT Hisense L675 Pro, HS6739MT Hisense F35,
- HLTE221E, HLT221E Hisense E30 SE, HLTE222E Hisense U50, HNR552T, TYH201H Hisense Tianyi One


Added support Oukitel phones:

- Oukitel C33, Oukitel C35, Oukitel OKT3, Oukitel WP23 Pro, Oukitel WP28, Oukitel WP32.


Added support ZTE phones:

- 1010 Optus X Pro 2, 1010L Voyage 30 4G, 1021L, 7060 Blade V50 Smart


Added support:

- MediaTek MT8168


Fixed

- formating User Data,
- some bugs.




DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

 

[GsmToto]

new download setup,

Pandora_setup_6.9(sstem).exe

 

[GsmToto]

Selected model: Samsung Mediatek
Operation: Erase FRP
Software version: 6.9

Searching USB Flash interface... COM2 detected
Setup connection... OK
Model: SM-A156U
SW version: A156USQS1SG2
Sales code: CCT
Device ID: 309d27410d130664
Vendor: SAMSUNG
Product: KM5L9001DA-B424
Unique Number: CE11237BCCCBA51E371W
FW Version: 0003
Capacity: 128 Gb
Reading data from phone... OK
Sending data to phone... OK
Rebooting to download... OK
Searching USB Flash interface... COM2 detected
Setup connection... OK
Sending data to phone... OK
Sending data to phone... OK
Rebooting... OK
Erase FRP done!

 

[saadshaikhsaadi]

Pandora PRO 6.9 Update. Lot of new devices added.

Added support ONN phones:

- 100003561 ONN 8 Pro, 100003562 ONN 10.1 Pro, 100005206 ONN 7, 100005207 ONN 8, 100005208 ONN 10.1,
- 100005209 ONN 10.1, 100011885 ONN 8 Gen 2, - 100011886 ONN 10.1 Gen 2, 100015685 ONN 7 Gen 2,
- 100026191 ONN 7 Gen 2, 100043279 ONN 11.6 Pro, 100044018G ONN 8 Kids, 100044018P ONN 8 Kids,
- 100071481 ONN 7 Gen 3, 100071483 ONN 8 Gen 3, 100071485 ONN 10.1 Kids, 100092988 ONN 7 Kids,
- 100092980 ONN 10.1 Gen 3, 100110027 ONN 11 Pro, 100110603 ONN 10.4 Pro.


Added support Hisense phones:

- HLTE220E Hisense E30, HS6737MT Hisense L675 Pro, HS6739MT Hisense F35,
- HLTE221E, HLT221E Hisense E30 SE, HLTE222E Hisense U50, HNR552T, TYH201H Hisense Tianyi One


Added support Oukitel phones:

- Oukitel C33, Oukitel C35, Oukitel OKT3, Oukitel WP23 Pro, Oukitel WP28, Oukitel WP32.


Added support ZTE phones:

- 1010 Optus X Pro 2, 1010L Voyage 30 4G, 1021L, 7060 Blade V50 Smart


Added support:

- MediaTek MT8168


Fixed

- formating User Data,
- some bugs.




DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

plz team plz work on new preloader mobile new securty patch frp imei repair inifnix tecno oppo vivo work on plz

 

[Pintu Gupta@]

Pandora PRO 6.9 Update. Lot of new devices added.

Added support ONN phones:

- 100003561 ONN 8 Pro, 100003562 ONN 10.1 Pro, 100005206 ONN 7, 100005207 ONN 8, 100005208 ONN 10.1,
- 100005209 ONN 10.1, 100011885 ONN 8 Gen 2, - 100011886 ONN 10.1 Gen 2, 100015685 ONN 7 Gen 2,
- 100026191 ONN 7 Gen 2, 100043279 ONN 11.6 Pro, 100044018G ONN 8 Kids, 100044018P ONN 8 Kids,
- 100071481 ONN 7 Gen 3, 100071483 ONN 8 Gen 3, 100071485 ONN 10.1 Kids, 100092988 ONN 7 Kids,
- 100092980 ONN 10.1 Gen 3, 100110027 ONN 11 Pro, 100110603 ONN 10.4 Pro.


Added support Hisense phones:

- HLTE220E Hisense E30, HS6737MT Hisense L675 Pro, HS6739MT Hisense F35,
- HLTE221E, HLT221E Hisense E30 SE, HLTE222E Hisense U50, HNR552T, TYH201H Hisense Tianyi One


Added support Oukitel phones:

- Oukitel C33, Oukitel C35, Oukitel OKT3, Oukitel WP23 Pro, Oukitel WP28, Oukitel WP32.


Added support ZTE phones:

- 1010 Optus X Pro 2, 1010L Voyage 30 4G, 1021L, 7060 Blade V50 Smart


Added support:

- MediaTek MT8168


Fixed

- formating User Data,
- some bugs.




DO NOT POST ANY LOGS OF JOB HERE in this thread, if you have any error - open own thread and supporters will answer there!!!

too funny update

 

[jadoon]

Selected model: Tecno BF7 (Tecno Spark Go 2023)
Operation: Repair
Software version: 6.9

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM50 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xE9EA04AB, 0x899422D4, 0xADF251EB, 0xCAE06B86
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... error(STATUS_SEC_INVALID_DA_VER)
sie add tecno bf7 update 5-2-2024

 

[GsmToto]

software download link 181.89 MB file on MEGA

 

[Barm1993]

team Pandora para cuando los DA para Tecno e Infinix parches de seguridad 2024?

 

[GsmToto]

Selected model: Realme RMX3710 (Realme C55)
Operation: Eliminar FRP
Software version: 6.9

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2[PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xBF2DEA3C, 0x4536BD99, 0xB0900D30, 0xF8CFX457
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x9B0100593053323536006D7858B83W2V
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Y0S256
EMMC_ID : 0x9B0100593053323536006D7858B83W2V
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x3A3E000000 (232,97Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448,00Kb)
EXT_RAM : 0x0100000000 (4,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3710
Product Name : RMX3710
Product Device : REE2ADL1
Product Board : k69v1_64_k419
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Sat Sep 9 12:16:50 CST 2023
Display ID : RMX3710_11_A.61
Security Patch : 2023-09-05
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : T.R4T2.1321e7f_563
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Realme_RMX3710%20(Realme%20C55)/FRP_BACKUP_(2024-5-14_13-17-33)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Tecno KG5j (Tecno Spark Go 2022)
Operation: Eliminar FRP
Software version: 6.9

Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to [BOX or PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1504.0]
Device found at COM2 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x5A252053, 0x06B38E23, 0x28A8613C, 0xC30A7A3X
Load DownloadAgent... OK
Search DA... OK [1]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Get device info... OK
EMMC_ID: 0x15010043555441343205CFE9FA5B42C5
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [5]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: CUTA42
EMMC_ID : 0x15010043555441343205CFE9FA5B42C5
EMMC_BOOT1: 0x0000400000 (4,00Mb)
EMMC_BOOT2: 0x0000400000 (4,00Mb)
EMMC_RPMB : 0x0001000000 (16,00Mb)
EMMC_USER : 0x0E8F800000 (58,24Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233,25Kb)
EXT_RAM : 0x0080000000 (2,00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TECNO
Product Manufacturer : TECNO MOBILE LIMITED
Product Model : TECNO KG5j
Product Name : KG5j-OP
Product Device : TECNO-KG5j
Product Board : TECNO-KG5j
Board Platform : mt6761
Build ID : RP1A.200720.011
Build Date : Fri Jan 5 21:27:57 CST 2024
Display ID : TECNO-RGo-32-240105V3934
Security Patch : 2024-01-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 240105V455
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Tecno_KG5j%20(Tecno%20Spark%20Go%202022)/FRP_BACKUP_(2024-5-14_07-33-43)/
Writting FRP data... OK
Erase FRP done!

 

[GsmToto]

Selected model: Mediatek Mediatek
Operation: Wipe Data
Software version: 6.9
There is a risk of data loss.
This procedure will erase all User Data
Make sure that you have a backup created. Continue? YES
Work ID: 28744521

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM2 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 6592
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A11
Detect chip [MT6592]
Library Version [1]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Load DownloadAgent... OK
ME_ID = 0x4DF25A2C, 0xDA0E68EF, 0xF9D429B4, 0xE8A5732X
Get BROM version... OK
Search DA... OK [28]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Checking bootloader answer... OK
Wait for answer from bootloader... OK
Wait for hw detection... OK
Wait DA version... v4.2
Send BROM version... OK
Send storage config... OK
SyncBmtInfoWithDA... OK
Set params... OK
Read flash info... OK
EMMC_ID: 0x530E01EA4D4D655016A310432D382238
Load EMI from phone... OK
Init DRAM... OK
Enable DRAM... OK
Sync with DA... OK
Wait for DA H/W detection... OK
EMMC INFO:
EMMC_CNAME: SPeMMC
EMMC_ID : 0xEA010E5350654D4D4310A31634533259Z
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0040000000 (1.00Gb)
Checking USB status... USB_FULL_SPEED
Switching to USB high speed... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek DA USB VCOM (Android),usb2ser.sys,3.0.1504.0]
High Speed USB detected at COM2
Open port... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... error(S_DL_READ_PT_FAIL)
Read partitions info from phone... error(1)

 

[hermann07]

hi Team ,please fix this error

 

[faraday]

Hello, this is the team that developed the Pandora Box. Have you stopped working on the z3x box? When will you update the z3x box? You are a terrible team. You make the z3x box first, as if everything was going well, then you release the pandora. Shame on you. You are stealing people's money. Combine the z3x box and pandora. Be fair immediately.

 

[aliipi]

Selected model: Vivo PD2139BF (Vivo Y21 (2021))
Operation: Repair
Software version: 6.10

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1633 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM0 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x1951B418, 0x88BDEA64, 0xE1754114, 0xD759DDCB
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... error(DA_IN_BLACKLIST)

 

[samsameer]

Send bootloader... error(DA_IN_BLACKLIST)..........2024 latast security not support help me