Owon SPE3051 30V / 5A Programmable Single-channel Linear DC Power Supply with 2.8-inch Display
Buy at below link : Owon SPE3051 30V / 5A Programmable Single-channel Linear DC Power Supply with 2.8-inch Display - MartviewCLICK HERE
Features:
Independent output switch control to protect the circuit
Long press to set automatic voltage/current output after 5 seconds of power on
Over-voltage and over-current value protection circuits can be set
Constant voltage CV/constant current CC intelligent switching mode to effectively protect the circuit
When the actual current exceeds the preset current value, the power supply automatically switches to CC mode to protect the circuit
2.8" LCD for more complete display information
Constant power design with a wide range of use, allowing the user to provide a flexible configuration of higher voltage and larger electrical charge within the rated power range One unit equals multiple units
Output voltage/current change curve monitoring function, suitable for mobile phone and notebook repair, PCB aging test, battery charging and discharging experiments, etc.
List waveform editing output, 10 sets of timed output can be edited
4 groups of Memory shortcut parameters called function
The stable output of low ripple noise power supply to meet the requirements of high precision testing
Intelligent temperature-controlled fan heat dissipation to reduce noise disturbance and make the power supply output stable for a long time
Specification:
Model: SPE3051
Rated Output: Voltage: 0-30V; Current: 5A; Output Power: 150W
Load Regulation: Voltage: ≤30mW; Current: ≤20mA
Power Regulation: Voltage: ≤30mW; Current: ≤20mA
Setting Resolution: Voltage: 10mV; Current: 1mA
Readback Resolution: Voltage: 10mV; Current: 1mA
Value Resolution: Voltage: ≤0.1% ±20mV; Current: ≤0.05% ±10mA
Readback Value Resolution: Voltage: ≤0.1% ±20mV; Current: ≤0.1% ±10mA
Ripple/Noise(*): Voltage(Vpp): ≤30mVp-p; Voltage(RMS): ≤3mVrms; Current(RMS): ≤30mAp-p
Output temperature coefficient: Voltage:100ppm/℃; Current: 200ppm/℃
Readback temperature coefficient: Voltage: 100ppm/℃; Current: 200ppm℃
Response Time(50%-100% Rated load): ≤1.0ms
Storage: 4 groups of data
Working Temperature: 0-40℃