Oppo Reno 6 Pro (CPH2249) IMEI Repair Failed With Z3x Pandora Box Please Fix This Issue.
Here Is My Work Log:-
Selected model: OPPO CPH2249 (OPPO Reno6 Pro 5G)
Operation: Repair
Software version: 7.10
Work ID: 55395297
Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V2023,usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM28 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0950
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6893]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V2023,usb2ser_mtk.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM28 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0950
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6893]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF8922262, 0x92AE6011, 0xA7A4AEDA, 0xAF5F8FC3
Get Chip ID... [MT6893]
Get SOC ID... [6BB6C3F9EEA26C502CDC85799A0356DCA026F32CC010DC62D0C593E5FF0DB38D]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [19]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): KLUEG8UHDC-B0E1 (0600)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
UFS_CID : KLUEG8UHDC-B0E1
UFS_FWVER : 0600
BLOCK_SIZE: 0x0000001000 (4.00Kb)
UFS_LU0 : 0x0000400000 (4.00Mb)
UFS_LU1 : 0x0000400000 (4.00Mb)
UFS_LU2 : 0x3B96000000 (238.34Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : alps
Product Manufacturer : alps
Product Model : CPH2249
Product Name : vnd_oplus6893
Product Device : oplus6893
Product Board : oplus6893
Board Platform : mt6893
Build ID : RP1A.200720.011
Build Date : Mon Jun 7 03:35:56 CST 2021
Display ID : CPH2249_11_A.11
Security Patch : 2021-06-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1623007608546
Userdata FS Type : F2FS
Read security partition from phone...
Decrypting security data... error
Wrong key, unable to unlock bootloader!
I Already Unlocked By Bootloader Using Dft Pro But While I Tried To Repair Imei Using Pandora Box but Its Failed
Please Fix This Issue As soon as possible.
