Infinity OPPO A94 5G FRP DONE

[Naveed Zeeshan]

OPPO A945G FRP DONE ONLY ON CM2 DONGLE ALL OTHER FAILS

/N: D69A9875 v0154
Infinity [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.40a3

Backup files: C:\InfinityBox\CM2MT2\backup\
Backup files: 3 dirs: 0
Build device list...
Init environment...
Load IDBase v124493 Ok

Check for updates...
Infinity Chinese Miracle-2 #CM2MT2 v2.42

Required firmware v0154

Wrong Username or Password - set it at [Settings] to get server access


Operation: Identify Device [ v2.40a3 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
PORT: BOTH [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[+] AutoEMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM47)
MODE: BOOTROM; PORT: 47
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
Error: Fail to init protocol
Disconnect battery and cable
- Check USB drivers
- Change cable - Change USB port - Do not use USB-hub
- Select another base|model|DA
Try again
Reconnect Power/Cable now


Operation: Identify Device [ v2.40a3 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
PORT: BOTH [ B + P ]
[+] Read Deep info: PRL, HW, DEBUG
[+] AutoEMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[-] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek DA USB VCOM (Android) (COM48)
MODE: PRELOADER PORT; PORT: 48
Waiting BOOT ack...
PRELOADER: ACK confirm FAIL
BROM: Init BROM
Error: Fail to init protocol
Disconnect battery and cable
- Check USB drivers
- Change cable - Change USB port - Do not use USB-hub
- Select another base|model|DA
Try again
Reconnect Power/Cable now

Reset Mode: Forcedly reset UserData + FRP: Erase

Operation: Reset Settings/Format FS [ v2.40a3 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FULL FACTORY: FORCED + FRP
Wait...
WARNING!
Format FS WILL RESET ALL USER DATA!
Make sure about correct format mode selection!
Continue?
Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek DA USB VCOM (Android) (COM48)
MODE: PRELOADER PORT; PORT: 48
Waiting BOOT ack...
PRELOADER: ACK confirm FAIL
BROM: Init BROM
Error: Fail to init protocol
Disconnect battery and cable
- Check USB drivers
- Change cable - Change USB port - Do not use USB-hub
- Select another base|model|DA
Try again
Reconnect Power/Cable now


Operation: Identify Device [ v2.40a3 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FLASH
PORT: BROM ONLY
[+] Read Deep info: PRL, HW, DEBUG
[+] AutoEMI
[+] FireFly UNI-Proto
[+] Vendor-Specific Analyzer
[+] Local SLA
[-] Force BROM
Wait...

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM47)
MODE: BOOTROM; PORT: 47
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
Init passed
CHIP: MT6853 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0996
CODE: Moution
TYPE: MODERN [RAPHAEL]
MEID: 48B2E92591397F66E7BE49057E8D7108
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: 428B3A13E71D7D64C98B6BDFD02767396C08772AD3B7D1A57B5F9D18051364BA
SLA: Local Auth
SLA: Starting Auth
FireFly: Look for EMI
FireFly: EMI found
SLA: Auth Passed; SEC: 0x000000E0
AGENT: 0_base: base_v2216 | Manual: Off
[3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6853
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Transfer control to DA...
DA: AGENT started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized

UFS CID: CE014B4D3856383030314A4D2D423831
VEN: 0x01CE | KM8V8001JM-B81 | 1900

EMI: FireFly preloader_oppo6853.bin with 22 memory type(s) supported
EMI: Init EMI from INTERNAL Database
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x00070000 [ 448.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

UFS CID: CE014B4D3856383030314A4D2D423831
VEN: 0x01CE | KM8V8001JM-B81 | 1900
LU0: 0x00400000 [ 4.00 MB ]
LU1: 0x00400000 [ 4.00 MB ]
LU2: 0x1DCB000000 [ 119.17 GB ]
FSN: 59c5f6505e53
REG: 0x101010000

CHIP: MT6853 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0996
CODE: Moution
TYPE: MODERN [RAPHAEL]
RNID: 830CA4D94749C2778BC0BF9A3343161F
MEID: 48B2E92591397F66E7BE49057E8D7108

USB: HIGH-SPEED
Boot done [1]

Reading...
Ok
Product Board: oppo6853
Board Platform: mt6853
Product Brand: alps
Product Device: oppo6853
Product Manfct: alps
Product Model: oppo6853
Product Name: vnd_oppo6853
Strategy: 5
Firmware ID: MT6853__CPH2211_gdpr_11_A.12_2021101912440000

Verify firmware [MT6853__CPH2211_gdpr_11_A.12_2021101912440000]...
Firmware is unknown
Please upload file Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support

NVRAM: OPPO6853_20301_MDBIN_PCB01_MT6853_S00.MOLY_NR15_R3_MP6_TC16_PR2_SP_V1_P106
NVRAM: Items: 0xAC Size: 0x84CF26 State: Ok
WiFi MAC: AA0036004400
BlTh MAC: A898924287FE

Verify device config...
Ok
Loaders Ok

Backup [20] to C:\InfinityBox\CM2MT2\backup\MT6853__48B2E92591397F66E7BE49057E8D7108\
[25] Read: NVRAM
[15] Read: NVDATA
[24] Read: PROINFO
[49] Read: LK
[14] Read: NVCFG
[19] Read: PROTECT1
[1] Read: PGPT
[18] Read: PERSIST
[0] Read: PRELOADER
[7] Read: OPPORESERVE3
ZERO CONTENT file [64.00 Mb] deleted: C:\InfinityBox\CM2MT2\backup\MT6853__48B2E92591397F66E7BE49057E8D7108\opporeserve3.bin
[8] Read: OPPO_CUSTOM
[29] Read: OCDT
[30] Read: CDT_ENGINEERING
Done 12 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6853__48B2E92591397F66E7BE49057E8D7108\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6853__48B2E92591397F66E7BE49057E8D7108.7z
Verified

STORAGE : Life Status : UFS : OK!
STORAGE : OTP Status : UNLOCKED!
STORAGE : RPMB Status : UFS : RPMB KEY NOT PROGRAMMED [USABLE]

Scan preloader...
EMI: MT6752 preloader_oppo6853.bin with 22 memory type(s) supported
1. eUFS LP_DDR4X Dev: H9HQ16AFAMMDAR RAM: 8.00 GB
2. eMMC LP_DDR4X ID: 13014E53304A394D39 Ven: Micron | Dev: S0J9M9 RAM: 6.00 GB
3. eUFS LP_DDR4X Dev: KM8V8001JM-B81 RAM: 8.00 GB
4. eUFS LP_DDR4X Dev: KM8V7001JM-B810 RAM: 8.00 GB
5. eUFS LP_DDR4X Dev: MT128GASAO4U21 RAM: 4.00 GB
6. eUFS LP_DDR4X Dev: H9HQ16AECMMDAR RAM: 6.00 GB
7. eUFS LP_DDR4X Dev: KM8F8001JM-B813 RAM: 8.00 GB
8. eUFS LP_DDR4X Dev: H9HQ22AECMMDAR RAM: 6.00 GB
9. eUFS LP_DDR4X Dev: MT128GASAO4U21 RAM: 6.00 GB
10. eUFS LP_DDR4X Dev: KM5V7001DM-B621 RAM: 4.00 GB
11. eUFS LP_DDR4X Dev: MT064GASAO2U21 RAM: 4.00 GB
12. eUFS LP_DDR4X Dev: H9HQ53AECMMDAR RAM: 6.00 GB
13. eUFS LP_DDR4X Dev: KM8B8001JM-BC01 RAM: 8.00 GB
14. eUFS LP_DDR4X Dev: H9HQ22AFAMMDAR RAM: 8.00 GB
15. eUFS LP_DDR4X Dev: H9HQ15AFAMBDAR RAM: 8.00 GB
16. eUFS LP_DDR4X Dev: H9HQ15AECMADAR RAM: 6.00 GB
17. eUFS LP_DDR4X Dev: H9HQ15AECMBDAR RAM: 6.00 GB
18. eUFS LP_DDR4X Dev: KM8AA001JM-B623 RAM: 8.00 GB
19. eUFS LP_DDR4X Dev: KM8V9001JM-B813 RAM: 8.00 GB
20. eUFS LP_DDR4X Dev: KM2L9001CM-B518 RAM: 6.00 GB
21. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 6.00 GB
22. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 8.00 GB
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_oppo6853.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_oppo6853.bin [c689c721]...
Stored
Done: 00:00:56

Reset Mode: Forcedly reset UserData + FRP: Erase

Operation: Reset Settings/Format FS [ v2.40a3 ]
Platform: MTK SmartPhone - MT65/67/68/81/83/87 | Helio G/P/X
Mode: FULL FACTORY: FORCED + FRP
Wait...
WARNING!
Format FS WILL RESET ALL USER DATA!
Make sure about correct format mode selection!
Continue?
Yes
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM47)
MODE: BOOTROM; PORT: 47
Waiting BOOT ack...
BROM: Skip ACK verify
BROM: Init BROM
Init passed
CHIP: MT6853 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0996
CODE: Moution
TYPE: MODERN [RAPHAEL]
MEID: 48B2E92591397F66E7BE49057E8D7108
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: 428B3A13E71D7D64C98B6BDFD02767396C08772AD3B7D1A57B5F9D18051364BA
SLA: Local Auth
SLA: Starting Auth
SLA: Auth Passed; SEC: 0x000000E0
AGENT: 0_base: base_v2216 | Manual: Off
[3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Found MT6853
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Transfer control to DA...
DA: AGENT started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized

UFS CID: CE014B4D3856383030314A4D2D423831
VEN: 0x01CE | KM8V8001JM-B81 | 1900

EMI: FireFly preloader_oppo6853.bin with 22 memory type(s) supported
EMI: Init EMI from INTERNAL Database
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x00070000 [ 448.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

UFS CID: CE014B4D3856383030314A4D2D423831
VEN: 0x01CE | KM8V8001JM-B81 | 1900
LU0: 0x00400000 [ 4.00 MB ]
LU1: 0x00400000 [ 4.00 MB ]
LU2: 0x1DCB000000 [ 119.17 GB ]
FSN: 59c5f6505e53
REG: 0x101010000

CHIP: MT6853 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x0996
CODE: Moution
TYPE: MODERN [RAPHAEL]
RNID: 830CA4D94749C2778BC0BF9A3343161F
MEID: 48B2E92591397F66E7BE49057E8D7108

USB: HIGH-SPEED
Boot done [1]

Reading...
Ok
Verify device config...
Ok
Loaders Ok

Backup exist: C:\InfinityBox\CM2MT2\backup\MT6853__48B2E92591397F66E7BE49057E8D7108
[1] Process: RESET PROTECTION...
Format Ok: RESET PROTECTION
[2] Process: USERDATA...
Format Ok: USERDATA
[3] Process: CACHE...
Format Ok: CACHE
[4] Verified
[5] Verified
[6] Process: USERDATA...
Format Ok: USERDATA
[7] Process: USERDATA...
Format Ok: USERDATA
Done: 00:00:40
Reconnect Power/Cable now