Legitunlocks.com
Martview RB-03 - Universal BGA Reballing Platform

oppo a54 downgrade problem

mm3008215

mm3008215

Member
Jul 2, 2021
10
0
Nigeria
Selected model: OPPO CPH2239 (OPPO A54)
Operation: Write OFP
Software version: 5.0
Work ID: 3175311

Extracting scatter file... OK
Parse scatter file... OK
Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xD12B4171, 0x7901F304, 0x05F802AA, 0x29E44774
Get Chip ID... [MT6765]
Get SOC ID... [9B412DCB0D64C683840012D643CB045D53A10B024A1420CCBC771CB0E12A915A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68433861503E03106A664A583D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC8aP>
EMMC_ID : 0x90014A68433861503E03106A664A583D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Board : oppo6765
Board Platform : MT6765
Build ID : QP1A.190711.020
Build Date : Tue Jun 1 12:49:14 CST 2021
Display ID : QP1A.190711.020 release-keys
Security Patch : 2021-06-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Userdata FS Type : EXT4
Prepare list for upgrade... OK
Checking upgrade list... OK
Prepare format list... OK
Prepare final partition list... OK
Read partition "preloader"... OK
Read partition "opporeserve1"... OK
Read partition "opporeserve2"... OK
Read partition "opporeserve3"... OK
Read partition "oppo_custom"... OK
Read partition "nvcfg"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "persist"... OK
Read partition "proinfo"... OK
Read partition "nvram"... OK
Read partition "ocdt"... OK
Verify checksum... OK
Format "EMMC_USER" partition( 0x00008000..0x06387FFF )... OK
Format "EMMC_USER" partition( 0x12C88000..0x15187FFF )... OK
Format "EMMC_USER" partition( 0x17188000..0x1E821FFF )... OK
Format "EMMC_USER" partition( 0x20000000..0x207FFFFF )... OK
Format "EMMC_USER" partition( 0x23800000..0x239FFFFF )... OK
Format "EMMC_USER" partition( 0x23D00000..0x2C5FFFFF )... OK
Format "EMMC_USER" partition( 0x30600000..0x30DFFFFF )... OK
Format "EMMC_USER" partition( 0x31600000..0x1D1B0FBDFF )... error(STATUS_EXCEED_AVALIABLE_RANGE)
 
mm3008215

mm3008215

Member
Jul 2, 2021
10
0
Nigeria
mm3008215 said:
Selected model: OPPO CPH2239 (OPPO A54)
Operation: Write OFP
Software version: 5.0
Work ID: 3175311

Extracting scatter file... OK
Parse scatter file... OK
Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1633,usb2ser.sys,3.0.1504.0]
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xD12B4171, 0x7901F304, 0x05F802AA, 0x29E44774
Get Chip ID... [MT6765]
Get SOC ID... [9B412DCB0D64C683840012D643CB045D53A10B024A1420CCBC771CB0E12A915A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68433861503E03106A664A583D
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hC8aP>
EMMC_ID : 0x90014A68433861503E03106A664A583D
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Board : oppo6765
Board Platform : MT6765
Build ID : QP1A.190711.020
Build Date : Tue Jun 1 12:49:14 CST 2021
Display ID : QP1A.190711.020 release-keys
Security Patch : 2021-06-05
Version SDK : 29
Version Release : 10
Version Codename : REL
Userdata FS Type : EXT4
Prepare list for upgrade... OK
Checking upgrade list... OK
Prepare format list... OK
Prepare final partition list... OK
Read partition "preloader"... OK
Read partition "opporeserve1"... OK
Read partition "opporeserve2"... OK
Read partition "opporeserve3"... OK
Read partition "oppo_custom"... OK
Read partition "nvcfg"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "persist"... OK
Read partition "proinfo"... OK
Read partition "nvram"... OK
Read partition "ocdt"... OK
Verify checksum... OK
Format "EMMC_USER" partition( 0x00008000..0x06387FFF )... OK
Format "EMMC_USER" partition( 0x12C88000..0x15187FFF )... OK
Format "EMMC_USER" partition( 0x17188000..0x1E821FFF )... OK
Format "EMMC_USER" partition( 0x20000000..0x207FFFFF )... OK
Format "EMMC_USER" partition( 0x23800000..0x239FFFFF )... OK
Format "EMMC_USER" partition( 0x23D00000..0x2C5FFFFF )... OK
Format "EMMC_USER" partition( 0x30600000..0x30DFFFFF )... OK
Format "EMMC_USER" partition( 0x31600000..0x1D1B0FBDFF )... error(STATUS_EXCEED_AVALIABLE_RANGE)
Click to expand...
pls can someone help me out with the user partition error phone refusing to wipe and boots up then returns to recovery and does not wipe from recovery
 
You must log in or register to reply here.
Top