Help Oppo A3S after unlock dead

riadgsm1971 · Aug 13, 2020

Oppo A3S (cph1803) after unlock with isp 9008 port only. Already flashed dump and then full flash. Removed clk and cmd, but no luck. It still show 9008 qdloader port..

Log before unlock:

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-0130
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x087AE93D
Manufacturing date: Nov 2018
CID: 90014A48 41473461 32A5087A E93DB52C
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1803
brand: OPPO, model: CPH1803 (OPPO A3s)
build model list: CPH1803 (OPPO A3s)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1803EX_11_A.18)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190529.191350 release-keys

crypto state: encrypted?
Selected: [HYNIX] H9TQ17ADFTACUR/16GB+LPDDR3 24Gb (BGA221)

Log resent Condition:

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-0130
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x087AE93D
Manufacturing date: Nov 2018
CID: 90014A48 41473461 32A5087A E93DB52C
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1803
brand: OPPO, model: CPH1803 (OPPO A3s)
build model list: CPH1803 (OPPO A3s)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1803EX_11_A.19)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190717.054518 release-keys

Internal storage: 7.50 GiB
crypto state: unencrypted
Selected: [HYNIX] H9TQ17ADFTACUR/16GB+LPDDR3 24Gb (BGA221)

Ngoclamgsm · Aug 14, 2020

riadgsm1971 said:
Oppo A3S (cph1803) after unlock with isp 9008 port only. Already flashed dump and then full flash. Removed clk and cmd, but no luck. It still show 9008 qdloader port..

Log before unlock:

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-0130
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x087AE93D
Manufacturing date: Nov 2018
CID: 90014A48 41473461 32A5087A E93DB52C
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1803
brand: OPPO, model: CPH1803 (OPPO A3s)
build model list: CPH1803 (OPPO A3s)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1803EX_11_A.18)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190529.191350 release-keys

crypto state: encrypted?
Selected: [HYNIX] H9TQ17ADFTACUR/16GB+LPDDR3 24Gb (BGA221)

Log resent Condition:

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-0130
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 48MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x087AE93D
Manufacturing date: Nov 2018
CID: 90014A48 41473461 32A5087A E93DB52C
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: CPH1803
brand: OPPO, model: CPH1803 (OPPO A3s)
build model list: CPH1803 (OPPO A3s)
build id: OPM1.171019.026, version: 8.1.0 Oreo (CPH1803EX_11_A.19)
build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20190717.054518 release-keys

Internal storage: 7.50 GiB
crypto state: unencrypted
Selected: [HYNIX] H9TQ17ADFTACUR/16GB+LPDDR3 24Gb (BGA221)

Connect copper short clk or replace resistor same.
Good luck

ashaqkulgam · Aug 14, 2020

short clk

riadgsm1971 · Aug 14, 2020

Thanks for reply. I already short clk and cmd, changed clk.. no luck.. I just want to know if this is a hardware or software problem.. one senior brother saw that info log and told me emmc damaged.. But info log seems ok to me..

Ngoclamgsm · Aug 14, 2020

riadgsm1971 said:
Thanks for reply. I already short clk and cmd, changed clk.. no luck.. I just want to know if this is a hardware or software problem.. one senior brother saw that info log and told me emmc damaged.. But info log seems ok to me..

Always use Master Clear OPPO new security and you can see info here OPPO A3S DEAD 9008 PORT RECOVERED SUCCESSFULLY.

riadgsm1971 · Aug 14, 2020

Ngoclamgsm said:
Always use Master Clear OPPO new security and you can see info here OPPO A3S DEAD 9008 PORT RECOVERED SUCCESSFULLY.

Tried that.. Can you tell from identify log that the emmc damage or not?? Soldering was messy and box didnot detect first time without vcc-vccq point. After soldering vcc and vccq box detect ok..

pramukhmobile123 · Sep 2, 2020

Ext cxt
file ko write karo

sowrovhatiya · Sep 25, 2020

oppo a3s cph1855 ufi factory reset after dead please help me

Md Arshu · Sep 25, 2020

Inbox Karo

naiyar imam · Sep 26, 2020

Boot partition configuration 0x38

Sent From RMX2001 Using Martview Forum App

Search

Search

Help Oppo A3S after unlock dead

riadgsm1971

Active Member

Attachments

Ngoclamgsm

ashaqkulgam

Active Member

riadgsm1971

Active Member

Ngoclamgsm

riadgsm1971

Active Member

pramukhmobile123

Junior Member

sowrovhatiya

Member

Md Arshu

Member

naiyar imam

Junior Member