- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Service Function
Format/Factory Reset/ScreenLock
Auto
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Searching for MTK Device...Found
MTK Port Type : Flashmode BROM
FriendlyName : MediaTek USB Port (COM5)
Device : /5&15c311e1&0&2
SymbolicName : \\?\usb#vid_0e8d&pid_0003#5&15c311e1&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver : 01/22/2016,3.0.1504.0
Service : wdm_usb
Openning Port [COM5] Ok
Handshaking...Ok
HwCode : 0766 {MT6765/MT8768t}
Hwver : 0000
Target config : E5
SBC : 01 (True)
SLA : 00 (False)
DAA : 04 (True)
SWJTAG : 04 (True)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 20 (True)
MEMWRITE : 40 (True)
CMD_C8 : 80 (True)
Connection : BROM
HW Subcode : 8A00
HW Subcode : CA00
SW Ver : 0000
ME_ID : 7D8F377ECE788DC333A00CAC94303921
SOC_ID : DE7C027C933CAF5C0FDD35C18C323FC5F40A1D63F10BF5077CD73AB7B8D5C784
Exploiting Device...
Successfully Exploited..
Handshaking...Ok
Dumping Preloader from Bootrom..
Seeking preloader address..Found @ 0x00200BC4
Starting to dump...
Prel Size : 0x0003DEFC
Successfully dump preloader.. [D:\SOFTWARE_BOXES\HYDRA\HYDRA_TOOL_V.5.4\Boot\PreloaderDump\preloader_oppo6765_19581.bin]
Target config : 00
SBC : 00 (False)
SLA : 00 (False)
DAA : 00 (False)
SWJTAG : 00 (False)
EPP : 00 (False)
CERT : 00 (False)
MEMREAD : 00 (False)
MEMWRITE : 00 (False)
CMD_C8 : 00 (False)
Connection : BROM
Preparing Download Agent..[MTK_AllInOne_DA_5.2152.bin]
Patching da2 ... Ok
Uploading Stage 1....
Successfully uploaded stage 1, jumping ..
Executing JUMP_DA Address @ 0x00200000
Jumping to 0x00200000 Ok 0xC0
Successfully received DA sync
ONNECTION_AGENT : brom
DRAM config needed for : 90014A6844456150
Sending auto preloader from dump... [preloader_oppo6765_19581.bin]
Sending emi data.. [DRAM setup passed.]
Sending emi data succeeded.
Uploading stage 2...
Upload data was accepted. Jumping to stage 2...
Successfully uploaded stage 2
ERAM Size : 0x000000000003A000-232 KB
IRAM Size : 0x0000000180000000-6 GB
EMMC Boot1 Size : 0x0000000000400000-4 MB
EMMC Boot2 Size : 0x0000000000400000-4 MB
EMMC RPMB Size : 0x0000000001000000-16 MB
EMMC USER Size : 0x0000001D1F000000-116.484 GB
EMMC CID : 90014A684445615033035A75D64D273B - hDEaP3
HW-CODE : 0x766
HWSUB-CODE : 0x8A00
HW-VERSION : 0xCA00
SW-VERSION : 0x0
CHIP-EVOLUTION : 0x0
DA-VERSION : 1.0
Speed : high-speed
Upload data was accepted. Jumping to stage 2...
DA Extensions successfully added
Reading Partition Table ..
Partition Count : 44
--------------- Reading build.prop content ---------------
Vendor : OPPO
Manufacturer : OPPO
ID : PPR1.180610.011
SDK : 28
Release : 9
ABI : arm64-v8a
CPU abilist : arm64-v8a,armeabi-v7a,armeabi
Locale : en-US
Description : full_oppo6765_19581-user 9 PPR1.180610.011 eng.root.20211115.152609 release-keys
Security Patch : 2021-11-05
StorageType : mtp
--------------- end of build.prop content ---------------
Reading IMEI........
IMEI1 : 867498049172537
IMEI2 : 867498049172529
-------------------------------
Bootloader Status...
Bootloader : Locked
-------------------------------
Backing up Security..
- preloader(preloader.bin), 512 KB = Ok [preloader_oppo6765_19581.bin]
*Creating Scatter file... D:\SOFTWARE_BOXES\HYDRA\HYDRA_TOOL_V.5.4\Backup\MTKBKUP\0766_7D8F377ECE788DC333A00CAC94303921\Auto\033023194927\6765_Android_scatter.txt
- pgpt(pgpt.bin), 32 KB = Ok
- nvram(nvram.bin), 64 MB = Ok
- nvdata(nvdata.bin), 64 MB = Ok
- frp(frp.bin), 1024 KB = Ok
- protect1(protect1.bin), 8 MB = Ok
- protect2(protect2.bin), 8.469 MB = Ok
- persist(persist.bin), 48 MB = Ok
- proinfo(proinfo.bin), 3 MB = Ok
- oppo_custom(oppo_custom.bin), 1024 KB = Ok
- opporeserve1(opporeserve1.bin), 8 MB = Ok
- opporeserve2(opporeserve2.bin), 64 MB = Ok
- nvcfg(nvcfg.bin), 32 MB = Ok
- sec1(sec1.bin), 2 MB = Ok
- seccfg(seccfg.bin), 8 MB = Ok
Backup Done!!!
------------------------------
Factory Reset Flash Mode..
------------------------------
Operation : Safeformat Universal...
Status: Ok
Rebooting Device...
Reboot Option : RebootToNormal
Rebooting Operation Done!!!!
Elapsed Time : 00:01:38
