LOGS
Code:
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Main Info ============
CPU : MSM8953
CID : 0x0032
IMEI : 358958063436890
UID : 95246EDE00000000000000000000
Model Info ============
DevModel : XT1686
IntName : potter
SW Info ============
DevSWVer : Blur_Version.25.11.14.potter.retail.en.US
DevQCVer : LA.UM.5.6.r1-01900-89xx.0
BaseBand : M8953_8000.128.06.42R POTTER_INDIADSDS_CUST
BootLDRv : moto-msm8953-C0.87(*)
HW Info ============
eMMCInfo : 32GB SAMSUNG RX14MB RV=08 PV=07 FV=0000000000000007
DRAMInfo : 4GB SAMSUNG LP3 DIE=8Gb M5=01 M6=05 M7=00 M8=5F
Lock Info ============
WarrantyVoid : no
FRP Lock : protected (77)
Done!
Elapsed: 00:00:09
Operation : Moto ADB Enable [ v1.03 ]
Mode : Enable Factory
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Operation done!
-- > Info : Wait till device boot, make "Enable ADB" operation after
-- > Info : Don't forget DISABLE "FACTORY MODE" after make "RESET FRP"!
Done!
Elapsed: 00:00:08
Operation : Moto ADB Enable [ v1.03 ]
Mode : Enable ADB
Waiting for NetInterface arrival ...
1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!
Connect Ok!
Waiting ...
Trying link with : 192.168.137.2
Connected to device!
Device : XT1686
Switching to FACTORY ...
Setting Unsecure mode
Waiting device ...
Connect Ok!
Trying link with : 192.168.137.2
Connected to device!
Device : XT1686
Setting ADB ...
Waiting device ...
Connect Ok!
Trying link with : 192.168.137.2
Connected to device!
Device : XT1686
Setting ADB ...
1. Disconnect cable from device, wait device reboot
2. Make "Reset FRP"
3. Disable "FACTORY MODE" after operations done!
Done!
Elapsed: 00:01:15
Operation : Reset FRP (ADB) [ v1.03 ]
Waiting for device in ADB mode ...
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!
Connect Ok!
Device : potter_n
Model : Moto G (5) Plus
FRP reset passed! Make FACTORY RESET from menu!
-- > MOTO FRP : Don't forget to DISABLE FACTORY MODE!
Done!
Elapsed: 00:00:12
Operation : Moto ADB Enable [ v1.03 ]
Mode : Disable Factory
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Operation done!
Done!
Elapsed: 00:00:08