Motorola XT1762 Imei Repair Nck Dongle

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Logs

Code:
 Action : Boot Info.
 Selected Motorola:XT1762
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Reinsert phone battery.
 Battery must be charged.
 Phone must be off with battery inside.
 Please insert USB cable now...
 Detected : MediaTek PreLoader USB VCOM (Android) (COM10)
 Boot mode: Preloader
 Using Algo 2.
 Phone detected...Please wait
 Sending DA agent, please wait...
 ----------------------------------------------------
 BaseBand CPU :MT6737M
 BaseBand CPU Secure Version : FF
 BaseBand CPU Bootloader Version : 01
 ----------------------------------------------------
 INT RAM: 128 KB SDRAM
 EXT RAM: 2 GB  DRAM
 ----------------------------------------------------
 EMMC: (116Gb+16384Mb) SAMSUNG 0x514531334d42
 EMMC FW VERSION: 0d:00:00:00:00:00:00:00
 EMMC CID: 150100514531334D42 : 00000000000000
 EMMC UA SIZE: 0x3a3e00000     
 BOOT STYLE: EMMC BOOT
 FULL LENGTH: 0x3a4a00000      [14.572 GB]
 Status: USB_HIGH_SPEED
 Detecting high speed port, wait......
 If driver not installed, install high speed port driver.
 If not need high speed port, disable it.
 After repeat opperation.
 Detected : MediaTek DA USB VCOM (Android) (COM26)
 -Reading GPT Drive OK
 This phone have FRP partition.
 Build ID: NMA26.42-75
 Version: 7.1.1
 Build Date: Fri Aug  4 03:41:07 CDT 2017
 Model: Moto E (4)
 Brand: motorola
 Device: woods
 Mediatek Version Release: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P69
 Wait untill phone will start charging.
 All done.
Code:
 Selected connection metod: Meta Connection
 Exe version: NCKDongle AndroidMTK 2.5.9.0
 Selected phone: XT1762
 Action : IMEI REPAIR.
 IMEI[1] for write : 355637080020241
 IMEI[2] for write : 355637080020258
 Scanning for presents meta ports...
 Phone must be off with battery inside.
 Please insert USB cable now...
 In some phones need to keep VOL- button untill inserting USB cable.
 [10]Detected: MediaTek PreLoader USB VCOM (Android) (COM10)
 \\?\usb#vid_0e8d&pid_2000#6&39fc866b&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
 Starting META mode, wait...
 Restarting to meta,wait....
 If drivers missing, please install CDC drivers.
 This can take up to 5 min on slow phones.
 If take too long, check device manager for drivers.
 [535]META Port Detected: MediaTek USB VCOM (Android) (COM535)
 USB\VID_0E8D&PID_2007\6&39FC866B&0&2
 Start sync target, waiting responce.....
 [AP]BaseBand CPU : mt6737m,S01
 [AP]APP_VER: alps-mp-n1.mp1-V1_lenovo6737m.35.n1_P69
 Making target channel configuration, wait...
 Making tunnel configuration, wait...
 Rebooting to meta, wait....
 [META]BaseBand CPU : MT6735, E00
 [META]SW_VER : ANDY.ROAP.V35
 [META]HW_VER : LENOVO6737M_35_N1_HW
 Meta mode conected ok, start reading phone....
 IMEI to repair: [1] 355637080020241
 IMEI to repair: [2] 355637080020258
 Clean Boot flag ok.
 All done.
 
Top