Logs
Code:
Welcome to Medusa Pro Software version 1.6.0.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Samsung eMMC V3W00M
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 15010056335730304D004837494CA071
Manufacturer ID : 0X15
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : V3W00M
Product revision : 0.0
Product serial number : (hex) 4837494C
Manufacturing date : 10/2013
---------------------------------------------------------------
CSD Info
CSD : D02701320F5903FFF6DBFFEF8E40400D
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 15 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.7 (for MMC v5.0, v5.01)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7692288 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/V3W00M_08_08_2018_17_50_26.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.0; FW: 1.23.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00020000) 64 MB
P02: sbl1 (00020100, 00000400) 512 KB
P03: DDR (00020500, 00000040) 32 KB
P04: aboot (00020600, 000007E8) 1012 KB
P05: rpm (000211B8, 00000190) 200 KB
P06: tz (000215A0, 00000320) 400 KB
P07: sdi (00021988, 00000040) 32 KB
P08: utags (000219C8, 00000400) 512 KB
P09: logs (00021DC8, 00001000) 2048 KB
P10: padA (00022DC8, 00001238) 2332 KB
P11: abootBackup (00024000, 000007E8) 1012 KB
P12: rpmBackup (00024BB8, 00000190) 200 KB
P13: tzBackup (00024FA0, 00000320) 400 KB
P14: sdiBackup (00025388, 00000040) 32 KB
P15: utagsBackup (000253C8, 00000400) 512 KB
P16: padB (000257C8, 00000838) 1052 KB
P17: modemst1 (00026000, 00000C00) 1536 KB
P18: modemst2 (00026C00, 00000C00) 1536 KB
P19: hob (00027800, 000003D0) 488 KB
P20: dhob (00027BD0, 00000040) 32 KB
P21: fsg (00027D00, 00000C00) 1536 KB
P22: fsc (00028900, 00000002) 1024 b
P23: ssd (00028902, 00000010) 8 KB
P24: sp (00028912, 00000800) 1024 KB
P25: cid (00029112, 00000100) 128 KB
P26: pds (00029212, 00001800) 3072 KB
P27: logo (0002AA12, 00002000) 4 MB
P28: clogo (0002CA12, 00002000) 4 MB
P29: persist (0002EB00, 00004000) 8 MB
P30: misc (00032B00, 00000400) 512 KB
P31: boot (00032F00, 00004FB0) 9.961 MB
P32: recovery (00037EB0, 00005050) 10.04 MB
P33: deviceinfo (0003CF00, 00000800) 1024 KB
P34: ftmlog (0003D700, 00008000) 16 MB
P35: cache (00045700, 0010B100) 534.1 MB
P36: system (00150800, 00228000) 1104 MB
P37: kpan (00378800, 00004000) 8 MB
P38: userdata (0037C800, 017C9700) 11.89 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/V3W00M_Gpt_0x0_0x100_08_08_2018_17_50_26.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.0; FW: 1.23.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/V3W00M_Cid_0x29112_0x100_08_08_2018_17_50_26.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.0; FW: 1.23.
Selected file: D:/MOTOROLA/XT1068 OK/OK XT1068_TITAN_RETBR_DS_6.0_MPB24.65-34-3_cid12_CFC.xml/flashfile.xml.
File parsing finished.
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Write data verification is enabled.
Writing. Please wait...
Writing partition modem... Done.
Writing partition sbl1... Done.
Writing partition aboot... Done.
Writing partition rpm... Done.
Writing partition tz... Done.
Writing partition sdi... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Writing partition fsg... Done.
Writing partition logo... Done.
Writing partition boot... Done.
Writing partition recovery... Done.
Erasing partition cache... Done.
Writing is finished.
SW: 1.6.0; FW: 1.23.