Full Logs
Code:
Welcome to Medusa Pro Software version 1.6.1.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Reader #2: FT SCR2000 1
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Sandisk eMMC SEM16G
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 45010053454D313647075402BB7A917B
Manufacturer ID : 0X45
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SEM16G
Product revision : 0.7
Product serial number : (hex) 5402BB7A
Manufacturing date : 09/2014
---------------------------------------------------------------
CSD Info
CSD : D00F00320F5903FFFFFFFFFF8A40407F
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 10 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Max enhanced data size: 7684096 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/SEM16G_31_07_2018_20_07_38.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.1; FW: 1.23.
P00: GPT (00000000, 00000100) 128 KB
P01: modem (00000100, 00032000) 100 MB
P02: sbl1 (00032100, 00000BB8) 1500 KB
P03: sbl2 (00032CB8, 00000BB8) 1500 KB
P04: sbl3 (00033870, 00000404) 514 KB
P05: aboot (00034870, 00000400) 512 KB
P06: rpm (00035428, 0000011C) 142 KB
P07: tz (00035810, 000001A4) 210 KB
P08: utags (00035BF8, 00000400) 512 KB
P09: logs (00035FF8, 00000800) 1024 KB
P10: padA (000367F8, 00001808) 3076 KB
P11: sbl2Backup (00038000, 00000BB8) 1500 KB
P12: sbl3Backup (00038BB8, 00001000) 2048 KB
P13: abootBackup (00039BB8, 00000BB8) 1500 KB
P14: rpmBackup (0003A770, 000003E8) 500 KB
P15: tzBackup (0003AB58, 000003E8) 500 KB
P16: utagsBackup (0003AF40, 00000400) 512 KB
P17: padB (0003B340, 00000CC0) 1632 KB
P18: modemst1 (0003C000, 00001800) 3072 KB
P19: modemst2 (0003D800, 00001800) 3072 KB
P20: mbl (0003F000, 00001000) 2048 KB
P21: hob (00040000, 00000500) 640 KB
P22: dhob (00040500, 00000010) 8 KB
P23: persist (00040600, 00004000) 8 MB
P24: ssd (00044600, 00000010) 8 KB
P25: fsg (00044610, 00001800) 3072 KB
P26: sp (00045E10, 00000800) 1024 KB
P27: misc (00046610, 00000400) 512 KB
P28: pds (00046A10, 00001800) 3072 KB
P29: cid (00048210, 00000100) 128 KB
P30: logo (00048310, 00002000) 4 MB
P31: clogo (0004A310, 00002000) 4 MB
P32: devtree (0004C310, 00000800) 1024 KB
P33: boot (0004CC00, 00005000) 10 MB
P34: recovery (00051C00, 00005000) 10 MB
P35: kpan (00056C00, 00004000) 8 MB
P36: cache (0005AC00, 002BCC00) 1402 MB
P37: padC (00317800, 00000800) 1024 KB
P38: system (00318000, 00420000) 2112 MB
P39: customize (00738000, 00008000) 16 MB
P40: userdata (00740000, 01611F00) 11.04 GB
Backuping Gpt partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SEM16G_Gpt_0x0_0x100_31_07_2018_20_07_38.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.1; FW: 1.23.
Backuping Cid partition...
Opening C:/Program Files (x86)/Medusa Pro Software/Backups/SEM16G_Cid_0x48210_0x100_31_07_2018_20_07_38.bin file...
Reading. Please wait... Done.
Elapsed time 00:00:00
SW: 1.6.1; FW: 1.23.
Erasing partition GPT... Done.
Erasing partition modem... Done.
Erasing partition sbl1... Done.
Erasing partition sbl2... Done.
Erasing partition sbl3... Done.
Erasing partition aboot... Done.
Erasing partition rpm... Done.
Erasing partition tz... Done.
Erasing partition utags... Done.
Erasing partition logs... Done.
Erasing partition padA... Done.
Erasing partition sbl2Backup... Done.
Erasing partition sbl3Backup... Done.
Erasing partition abootBackup... Done.
Erasing partition rpmBackup... Done.
Erasing partition tzBackup... Done.
Erasing partition utagsBackup... Done.
Erasing partition padB... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Erasing partition mbl... Done.
Erasing partition hob... Done.
Erasing partition dhob... Done.
Erasing partition persist... Done.
Erasing partition ssd... Done.
Erasing partition fsg... Done.
Erasing partition sp... Done.
Erasing partition misc... Done.
Erasing partition pds... Done.
Erasing partition cid... Done.
Erasing partition logo... Done.
Erasing partition clogo... Done.
Erasing partition devtree... Done.
Erasing partition boot... Done.
Erasing partition recovery... Done.
Erasing partition kpan... Done.
Erasing partition cache... Done.
Erasing partition padC... Done.
Erasing partition system... Done.
Erasing partition customize... Done.
Erasing partition userdata... Done.
Erasing is finished.
SW: 1.6.1; FW: 1.23.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Sandisk eMMC SEM16G
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 45010053454D313647075402BB7A917B
Manufacturer ID : 0X45
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : SEM16G
Product revision : 0.7
Product serial number : (hex) 5402BB7A
Manufacturing date : 09/2014
---------------------------------------------------------------
CSD Info
CSD : D00F00320F5903FFFFFFFFFF8A40407F
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 10 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.6 (for MMC v4.5, v4.51)
Erase block size : 512 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 4096 Kbytes
Partition config : (0x38) 00111000
Boot partition enable : User area
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x01) RST_n signal is permanently enabled
Partitioning support : Device supports partitioning features
Max enhanced data size: 7684096 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/Medusa Pro Software/EXT_CSD Backups/SEM16G_31_07_2018_20_09_26.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.1; FW: 1.23.
Switched to boot area partition 1.
Opening D:/MAIN/UFI BOX/OFFICIAL files and loader/EMMC/Motorola/XT1068 16GB OK/XT1068 16GB OK/boot1 Samsung eMMC VYL00M_08_03_2018_21_42_43.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.1; FW: 1.23.
Switched to boot area partition 2.
Opening D:/MAIN/UFI BOX/OFFICIAL files and loader/EMMC/Motorola/XT1068 16GB OK/XT1068 16GB OK/boot2 Samsung eMMC VYL00M_08_03_2018_21_43_33.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.1; FW: 1.23.
Switched to user area.
Opening D:/MAIN/UFI BOX/OFFICIAL files and loader/EMMC/Motorola/XT1068 16GB OK/XT1068 16GB OK/userdata Samsung eMMC VYL00M_08_03_2018_21_44_30.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.1; FW: 1.23.
Writing EXT_CSD succesfully complete!
Disconnected.
