Hello all,we have meizu m5s after upgrade customer say phone freez and torn off , we first do repair emmc after repair only boot loop , here log
after replace emmc from redmi note 4 only mtk usb no 't power phone
it is log original emmc
after replace emmc from redmi note 4 only mtk usb no 't power phone
it is log original emmc
Code:
Boot version: 1.04, FW version: 1.10 (Mar 26 2017 14:24:34)
Insertion test... Done.
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GE6BMB (0x474536424d42), rev: 0x03, serial number: 0x58FBCE4D
Manufacturing date: Oct 2017
CID: 15010047 4536424D 420358FB CE4DA4DC
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.56 GiB(15,634,268,160 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
EXT_CSD backup saved to "\\%BACKUPS%\GE6BMB_58FBCE4D.ext_csd"
ANDROID System Info:
platform: MT6735, cpu abi: arm64-v8a
manufacturer: Meizu
board: M5s, name: meizu_M5s
brand: Meizu, model: M5s
build id: MRA58K, version: 6.0 Marshmallow (Flyme 6.7.8.8G beta)
build description: meizu_M5s-user 6.0 MRA58K 1501530964 release-keys
name = 'RX1BMB' hex = 0x525831424D42 [SAMSUNG]
Code:
Setting bus width to 8 Bit
Setting frequence to 42 Mhz
EMMC Device Information :
EMMC CID: 150100474536424D420358FBCE4DA4DD
EMMC CSD: D02701320F5903FFF6DBFFEF8E40400D
EMMC Manufacture : SAMSUNG , EMMC NAME: GE6BMB , HEX: 474536424D42 , S/N: 58FBCE4D , rev. 0x03
EMMC Manufacture ID: 0x15 , OEM ID: 0x00 , Device Type: BGA (Discrete embedded) , Date: 10/2017
EMMC ROM 1 (Main User Data) Capacity: 14910 MB (0003A3E00000)
EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 4096 KB (000000400000)
EMMC RPMB (Replay Protected Memory Block) Capacity: 4096 KB (000000400000)
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD Information :
Extended CSD rev: 1.8 (MMC 5.1)
Boot configuration [PARTITION_CONFIG]: 0x48 , Boot from: ROM2 (Boot partition 1)
Boot Bus Config: 0x00 , width 1bit
H/W Reset Function [RST_N_FUNCTION]: 0x01, RST_n signal is permanently enabled
Supported partition features [PARTITIONING_SUPPORT]: 0x07
Device supports partitioning features
Device can have enhanced technological features in partitions and user data area
Device can have extended partitions attribute
Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00
Backup saved: GE6BMB_58FBCE4D_20190506_201743.extcsd
EMMC Init completed.