Selected model: Samsung SM-M013F (Galaxy M01 Core)
Operation: Remove KG
Software version: 2.10
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to BOX in BROM/PRELOADER Mode
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x7304952E, 0x4D3EFC74, 0xCD27999E, 0x0870BB74
Get Chip ID... [MT6739]
Get SOC ID... [58C4B6D090D4B57B02DE6F2929A40DE13EBC310CED53D8000261BA076D227D6A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [0]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100464536324D4200BDBFBAA3B785
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x150100464536324D4200BDBFBAA3B785
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x03AB400000 (14.68Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0040000000 (1.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Check A/B state... OK
Read product info... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-M013F
Product Name : a01coredd
Product Device : a01core
Product Board : k39tv1_bsp_1g_titan
Board Platform : -1
Build ID : QP1A.190711.020
Build Date : Thu Apr 15 22:52:00 KST 2021
Display ID : QP1A.190711.020.M013FDDU3AUD2
Security Patch : 2021-04-01
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : M013FDDU3AUD2
Read Write Counter[WC][MAX=0xFFFFFFFF]... 19203 OK
Backup RPMB... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-M013F%20(Galaxy%20M01%20Core)/"directory
Searching RPMB key... found! [3]
WC not incremented if data of page in rpmb same as in file
Format RPMB 0x100 bytes (0x1 pages)... OK
Format RPMB 0x100 bytes (0x1 pages)... OK
Read Write Counter[WC][MAX=0xFFFFFFFF]... 19203 OK
Reset (Samsung KG) RPMB done!
Operation: Remove KG
Software version: 2.10
Host Power Off... OK
Switch virtual port to NONE... OK
Connect Type-C to HUB... OK
Host Power On... OK
Connect phone to BOX in BROM/PRELOADER Mode
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Switch virtual port to USB... OK
Connect Type-C to BOX... OK
Host Power On... OK
Wait for device... OK
Read usbhost speed... HIGH
Read Device Descriptor...
Get VID/PID...0E8D/0003
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Advanced Bypass Security... OK
Disconnect virtual port... OK
Connect Type-C to HUB... OK
Wait for device connecting... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1504.0]
Device found at COM3 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x7304952E, 0x4D3EFC74, 0xCD27999E, 0x0870BB74
Get Chip ID... [MT6739]
Get SOC ID... [58C4B6D090D4B57B02DE6F2929A40DE13EBC310CED53D8000261BA076D227D6A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [0]
Send preloader... OK
Start preloader... OK
Check preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100464536324D4200BDBFBAA3B785
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_ID : 0x150100464536324D4200BDBFBAA3B785
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x03AB400000 (14.68Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0040000000 (1.00Gb)
Check USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Check A/B state... OK
Read product info... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-M013F
Product Name : a01coredd
Product Device : a01core
Product Board : k39tv1_bsp_1g_titan
Board Platform : -1
Build ID : QP1A.190711.020
Build Date : Thu Apr 15 22:52:00 KST 2021
Display ID : QP1A.190711.020.M013FDDU3AUD2
Security Patch : 2021-04-01
Version SDK : 29
Version Release : 10
Version Codename : REL
Firmware Version : M013FDDU3AUD2
Read Write Counter[WC][MAX=0xFFFFFFFF]... 19203 OK
Backup RPMB... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-M013F%20(Galaxy%20M01%20Core)/"directory
Searching RPMB key... found! [3]
WC not incremented if data of page in rpmb same as in file
Format RPMB 0x100 bytes (0x1 pages)... OK
Format RPMB 0x100 bytes (0x1 pages)... OK
Read Write Counter[WC][MAX=0xFFFFFFFF]... 19203 OK
Reset (Samsung KG) RPMB done!