- Jun 10, 2019
- 1,411
- 1,006
ACTION: Flash Firmware.
Selected firmware: LYF-F101K-000-02-34-200121.pac
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM7)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:02] Loader ok
[00:00:02] Wait for loader....
Loader send OK
Changing bautrate OK.
[00:00:02] [1]First boot done.
[00:00:02] Sending second loader.
[00:00:07] Second loader sent ok.
[00:00:07] Reading: miscdata
[00:00:07] Reading: l_fixnv1
[00:00:15] Making flash ic repartition.
[00:00:15] Start write: prodnv
[00:00:17] Start write: usbmsc
[00:00:26] Format: uboot
[00:00:27] [uboot]Format OK.
[00:00:27] Start write: splloader
[00:00:27] Start write: l_modem
[00:00:33] Start write: l_ldsp
[00:00:34] Start write: l_gdsp
[00:00:35] Start write: pm_sys
[00:00:35] Start write: wcnfdl
[00:00:35] Start write: wcnmodem
[00:00:36] Start write: boot
[00:00:41] Start write: recovery
[00:00:47] Start write: system
Drop comunication, waiting for data
[00:03:07] Start write: userdata
[00:03:12] Start write: logo
[00:03:12] Start write: fbootlogo
[00:03:12] Start write: cache
[00:03:15] Format: l_runtimenv1
[00:03:16] [l_runtimenv1]Format OK.
[00:03:16] Format: misc
[00:03:16] [misc]Format OK.
[00:03:16] Start write: persist
[00:03:17] Start write: sysinfo
[00:03:19] Start write: uboot
Flashing done.
If phone stuck on logo long time perform wipe from recovery or safe reset from exe
[can take 0-10 sec]Wait untill phone restart.
Log saved:
c:\umtool\unisoc_module\spreadtrum_module_backup_folder\Saved_Logs\_writepac_.txt
Total Time: 00:03:31
Done.
Flash file Link
Selected firmware: LYF-F101K-000-02-34-200121.pac
NV: Skip write nvram
Device Storage: EMMC
Start Detect phone...
Phone must be off with battery inside.
Long press "VOL -" key and insert usb cable.
For some phones need to
Long press "VOL -"+ "VOL +" key and insert usb cable.
Detected: SPRD U2S Diag (COM7)
[00:00:00] Sending loader.
BOOT: SPRD3
Sending loader, keep boot key untill loader start.
[00:00:02] Loader ok
[00:00:02] Wait for loader....
Loader send OK
Changing bautrate OK.
[00:00:02] [1]First boot done.
[00:00:02] Sending second loader.
[00:00:07] Second loader sent ok.
[00:00:07] Reading: miscdata
[00:00:07] Reading: l_fixnv1
[00:00:15] Making flash ic repartition.
[00:00:15] Start write: prodnv
[00:00:17] Start write: usbmsc
[00:00:26] Format: uboot
[00:00:27] [uboot]Format OK.
[00:00:27] Start write: splloader
[00:00:27] Start write: l_modem
[00:00:33] Start write: l_ldsp
[00:00:34] Start write: l_gdsp
[00:00:35] Start write: pm_sys
[00:00:35] Start write: wcnfdl
[00:00:35] Start write: wcnmodem
[00:00:36] Start write: boot
[00:00:41] Start write: recovery
[00:00:47] Start write: system
Drop comunication, waiting for data
[00:03:07] Start write: userdata
[00:03:12] Start write: logo
[00:03:12] Start write: fbootlogo
[00:03:12] Start write: cache
[00:03:15] Format: l_runtimenv1
[00:03:16] [l_runtimenv1]Format OK.
[00:03:16] Format: misc
[00:03:16] [misc]Format OK.
[00:03:16] Start write: persist
[00:03:17] Start write: sysinfo
[00:03:19] Start write: uboot
Flashing done.
If phone stuck on logo long time perform wipe from recovery or safe reset from exe
[can take 0-10 sec]Wait untill phone restart.
Log saved:
c:\umtool\unisoc_module\spreadtrum_module_backup_folder\Saved_Logs\_writepac_.txt
Total Time: 00:03:31
Done.
Flash file Link
If you find my post helpful, press like button✌