Lenovo ZUK Z2 Plus EDL Mode And Flash Process
If Handset Is On (Normal) Reboot Edl Via ADB
adb reboot edl
If Logo Only, Pattern Remove etc
EDL Process
1. disconnect USB cable and turn the phone completely off
2. press volume-up, and keep it pressed Around 15sec http://forum.*************.com/images/smilies/smile.png
3. press power button only 1/2 second keep press volume up
4. Now Press Power Immediately insert usb cable
5. wait for short vibration - you should also see the ZUK logo flash on screen for a split second
6. now you can release both power and volume-up, you should already see the USB device coming up on PC
If anything different happens, just disconnect, power-off and start again... Have fun!
Flashing Process
File - Z2131_CN_OPEN_USER_Q01080.2_N_ZUI_2.5.334_ST_17011 6_qpst.7z
Tool - QPST 2.7.460
If Handset Is On (Normal) Reboot Edl Via ADB
adb reboot edl
If Logo Only, Pattern Remove etc
EDL Process
1. disconnect USB cable and turn the phone completely off
2. press volume-up, and keep it pressed Around 15sec http://forum.*************.com/images/smilies/smile.png
3. press power button only 1/2 second keep press volume up
4. Now Press Power Immediately insert usb cable
5. wait for short vibration - you should also see the ZUK logo flash on screen for a split second
6. now you can release both power and volume-up, you should already see the USB device coming up on PC
If anything different happens, just disconnect, power-off and start again... Have fun!
Flashing Process
File - Z2131_CN_OPEN_USER_Q01080.2_N_ZUI_2.5.334_ST_17011 6_qpst.7z
Tool - QPST 2.7.460
