ITEL L5006 JIO (A23_PRO) FRP DONE!
Card found :
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : L5006C Jio
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!
Boot Done!
Device info :
Display ID : 010.01.020
Product Brand : Itel
Product Device : L5006C
Product Model : itel L5006C
Product Name : L5006C
Patch Level : QP1A.190711.020
Ver. Incmt : IN-V020-20210410
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-03-05
Build Time : 10.04.2021
Product Name : F3212R
Product Device : itel-L5006C
Product Info : L5006C
Product Board : L5006C
Board Platform : sp9832e
Product Manfct : itel
NVMng : SecurityInfo
IMEI[1] : 3503407140*****
IMEI[2] : 3503407140*****
IMEI[3] : 8674000203*****
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:E
Platform Version: MOCORTM_18A_ITELQ_W21.09.5_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_ITELQ_W21.09.5
HW Version: sc9832e_modem
CMP_Time : 04-01-2021 16:22:52
MODEM TAG : MOCORTM_18A_ITELQ_W21.09.5_Debug_FM_BASE_18A_ITELQ_W21.09.5_sc9832e_modem_sharkle_Smart_Phone
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:40
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : L5006C Jio
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:20
Card found :
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.14
Load IDBase v8331 Ok!
Operation : Identify [ v2.14 ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : L5006C Jio
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!
Boot Done!
Device info :
Display ID : 010.01.020
Product Brand : Itel
Product Device : L5006C
Product Model : itel L5006C
Product Name : L5006C
Patch Level : QP1A.190711.020
Ver. Incmt : IN-V020-20210410
Ver. CodeName : REL
Ver. Release : 10
Sec. Patch : 2021-03-05
Build Time : 10.04.2021
Product Name : F3212R
Product Device : itel-L5006C
Product Info : L5006C
Product Board : L5006C
Board Platform : sp9832e
Product Manfct : itel
NVMng : SecurityInfo
IMEI[1] : 3503407140*****
IMEI[2] : 3503407140*****
IMEI[3] : 8674000203*****
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SEC : SLS:2, SKS:0, SKV:E
Platform Version: MOCORTM_18A_ITELQ_W21.09.5_Debug
Project Version: sharkle_Smart_Phone
BASE Version: FM_BASE_18A_ITELQ_W21.09.5
HW Version: sc9832e_modem
CMP_Time : 04-01-2021 16:22:52
MODEM TAG : MOCORTM_18A_ITELQ_W21.09.5_Debug_FM_BASE_18A_ITELQ_W21.09.5_sc9832e_modem_sharkle_Smart_Phone
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
- > INFO : Remove cable from device to switch it off!
Done!
Elapsed: 00:00:40
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
>>> Device not found!
>>> Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Format FS / Reset Settings [ v2.14 ]
Mode : Default [ Reset Settings + FRP ]
BootMode : FLASH
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : Itel : L5006C Jio
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0008
FDL : EMMC_RO : False ; EMMC_PART : True ; EMMC_RPMB_SET : False
FDL : RAW : 0x0002
FDL : FLH : 0x400000
FDL : SEC : RSA auth required!
FDL : Process authentification ...
FDL : SEC : RSA auth passed!
FDL : Control transfered!
Boot Done!
Wipe Ok : UserData
Wipe Ok : Cache
Wipe Ok : FRP
Reconnect Power/Cable!
Done!
Elapsed: 00:00:20
