Infinity INFINIX X6831 error to flash

[abdoulkader]

Operation: Write Flash [ v2.45 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Wait...
[+] Update PMT [re-Part]
[-] Checksum Verify
[+] Safe Erase [Upgrade]
[+] Check compatibility
[+] Backup
[-] UserData Safe
[-] FLASH ERASE

Files: 18
[FL]: E:\x6810\
preloader_x6831_v7520.bin [ 322.25 Kb ]
tkv.img [ 1.00 Mb ]
vbmeta.img [ 4.00 Kb ]
vbmeta_system.img [ 4.00 Kb ]
vbmeta_vendor.img [ 4.00 Kb ]
md1img.img [ 48.39 Mb ]
spmfw.img [ 48.20 Kb ]
scp.img [ 555.09 Kb ]
sspm.img [ 493.27 Kb ]
gz.img [ 2.70 Mb ]
lk.img [ 1.31 Mb ]
logo.bin [ 1.30 Mb ]
boot.img [ 32.00 Mb ]
dtbo.img [ 8.00 Mb ]
tee.img [ 886.84 Kb ]
super.img [ 8.75 Gb ]
tranfs.img [ 60.14 Kb ]
userdata.img [ 14.71 Mb ]
Total size: 0x2371EB4A8 [ 8.86 Gb ]

1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek USB Port (COM15)
MODE [0]: BOOTROM; PORT: 15
Waiting for BOOT ACK...
BROM: Skip ACK verication
BROM: Init... Ok
CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]
MEID: 114030595D1EAB3A11BF465487716DD0
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: 776EBCA36A2821CEED7068F5B626BB534AC36DB055B8E93367DA90B155971699
SLA: Local Auth
SLA: Start Auth Ok
SLA: Continue Auth Ok
SLA: Start 0x15
SLA: Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: 114030595D1EAB3A11BF465487716DD0
AGENT: AUTO: Infinix: 2023-05
[caf6df7e] C:\InfinityBox\CM2MT2\boot\Infinix\2023-05\MTK_AllInOne_DA.bin
[b7eaac82] E:\x6810\preloader_x6831_v7520.bin
Looking for suitable BootChain in DA...
Found MT6768
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
EMMC CID: D62D004D4D43313238510C171A6A1A9B
VEN: Foresee OEM: 11520 ID: 4D4D43313238 [MMC128] PRV: 0x51
SNN: 202840682 [0x0C171A6A]
MM/YY: 1/2023

EMI: Init via preloader_x6831_v7520.bin
EMI: Init Ok
EMI: MT6752 preloader_x6831_v7520.bin with 9 memory type(s)
1. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 512.00 Mb
2. eMMC DDR3 ID: 90014A68423861503E Ven: Hynix | Dev: hB8aP> RAM: 3.00 Gb
3. eMMC LP_DDR4X ID: 90014A68433861503E Ven: Hynix | Dev: hC8aP> RAM: 4.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 8.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 8.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 4.00 Gb
7. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 8.00 Gb
8. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 8.00 Gb
9. DRAM LP_DDR4X ID: NOT_DEFINED Ven: Unknown 0x0000 | Dev: RAM: 4.00 Gb
EMI: EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC passed

Load HW info...
SRAM: 0x00070000 [ 448.00 Kb ]
DRAM: 0x100000000 [ 4.00 Gb ]

EMMC CID: D62D004D4D43313238510C171A6A1A9B
VEN: Foresee OEM: 11520 ID: 4D4D43313238 [MMC128] PRV: 0x51
SNN: 202840682 [0x0C171A6A]
MM/YY: 1/2023
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x00400000 [ 4.00 Mb ]
USER: 0x1D20500000 [ 116.50 Gb ]

CHIP: MT6768 SBID: 0x8A00 HWVR: 0xCA00 SWVR: 0x0002 EVOL: 0x0000 HWC: 0x0707
CODE: Talbot
TYPE: MODERN [RAPHAEL]
RNID: 31DD33E245006F59B6AD882D3C97512F
MEID: 114030595D1EAB3A11BF465487716DD0

USB: HIGH-SPEED
Boot done MODERN [RAPHAEL]

HW verification...
HW verification Pass

Analyze PMT...
Loaded 0x8000 bytes
PMT: PGPT [0x64] Records: 53
Verify device config...
Ok
Loaders Ok
Pre-Flash backup...
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6768__114030595D1EAB3A11BF465487716DD0

Verify PMT... Ok
Verify SEC DL...
Pre-Erase...
Erase: 0x0000000000000000 0x0000000001A08000
Erase: 0x0000000001D08000 0x0000000007E9A000
Erase: 0x000000000BBA2000 0x0000000004000000
Erase: 0x0000000014000000 0x0000000012200000
Erase: 0x000000002A800000 0x0000000357800000

RePartition...
RePartition: Ok
Analyze PMT...
Loaded 0x8000 bytes
PMT: PGPT [0x64] Records: 53

Flash write...
Write: PRELOADER [ 322.25 Kb ]
Fail: [PRELOADER] SEC: VIOLATE ANTI ROLLBACK
Error: 0xC002002D SEC: VIOLATE ANTI ROLLBACK
Offset 0x0000 of 0x50904
Flashing fail
It seems as something is wrong with device.
- Check battery voltage and charge it
- Check is device hardware Ok
- Try again
Reconnect Power/Cable now

 

[Infinity-Box]

Have you made [Identify] before flash?
What was original firmware version?
What was firmre version that you tried to write?