Huawei trt-l21a restarting on first Huawei logo.when mobile start. the mobile hang on logo for 1 minute after that restarting. then I flash it with sigma .sigma show error like this ''
Wrong selection of firmware files can damage the phone.
Are you sure you want to proceed? [YES]
Phone model: TRT-L21A
Version: TRT-L21AC185B184
Writing flash partition...Partition Table doesn't exist''
Open ISP Pinout picture ]
Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RX1BMB (0x525831424d42), rev: 0x06, serial number: 0x2C17E080
Manufacturing date: May 2017
CID: 15010052 5831424D 42062C17 E080542E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: msm8937, cpu abi: armeabi-v7a
manufacturer: unknown
board: QC_Reference_Phone, name: msm8937_32
brand: qcom, model: generic_a53_32
build model list: generic_a53_32
build id: NRD90M, version: 7.0 Nougat (System 5.1.0.78(1E6Y))
build description: generic_a53_32-user 7.0 NRD90M eng.jenkin.20190429.195902 test-keys
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMRX1000BM-B614/32GB+LPDDR3 24Gb (BGA221)
health report
Interface: UFI High-Speed
Serial number: 0011-8840-4367
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RX1BMB (0x525831424d42), rev: 0x06, serial number: 0x2C17E080
Manufacturing date: May 2017
CID: 15010052 5831424D 42062C17 E080542E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
eMMC 5.x HEALTH report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 20% - 30% device life time used
Estimation of the device lifetime (MLC): 20% - 30% device life time used
moviNAND Smart report:
Error Mode: 0x00000000 (Invalid Smart report in MMC5x has changed and not supported for this device(use eMMC 5.x HEALTH report instead).
Wrong selection of firmware files can damage the phone.
Are you sure you want to proceed? [YES]
Phone model: TRT-L21A
Version: TRT-L21AC185B184
Writing flash partition...Partition Table doesn't exist''
Open ISP Pinout picture ]
Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RX1BMB (0x525831424d42), rev: 0x06, serial number: 0x2C17E080
Manufacturing date: May 2017
CID: 15010052 5831424D 42062C17 E080542E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
ANDROID System Info:
platform: msm8937, cpu abi: armeabi-v7a
manufacturer: unknown
board: QC_Reference_Phone, name: msm8937_32
brand: qcom, model: generic_a53_32
build model list: generic_a53_32
build id: NRD90M, version: 7.0 Nougat (System 5.1.0.78(1E6Y))
build description: generic_a53_32-user 7.0 NRD90M eng.jenkin.20190429.195902 test-keys
crypto state: encrypted?
Custom moviNAND command is not supported for this device(MMC51).
Selected: [SAMSUNG] KMRX1000BM-B614/32GB+LPDDR3 24Gb (BGA221)
health report
Interface: UFI High-Speed
Serial number: 0011-8840-4367
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RX1BMB (0x525831424d42), rev: 0x06, serial number: 0x2C17E080
Manufacturing date: May 2017
CID: 15010052 5831424D 42062C17 E080542E
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
eMMC 5.x HEALTH report:
Device lifetime: Normal
Estimation of the device lifetime (SLC): 20% - 30% device life time used
Estimation of the device lifetime (MLC): 20% - 30% device life time used
moviNAND Smart report:
Error Mode: 0x00000000 (Invalid Smart report in MMC5x has changed and not supported for this device(use eMMC 5.x HEALTH report instead).