Legitunlocks.com
Martview VS-01 7inch Built-in Vacuum Pump Level LCD Screen Separator

DTPro Huawei Qualcomm – IMEI repair by DTpro team 2023

DTPro Tool
.::Greed::.

.::Greed::.

Friend's Martview
Jun 10, 2019
1,416
1,001
Huawei Qualcomm – IMEI repair by DTpro team 2023​

IMEI repair on Huawei or Honor devices with Qualcomm processors is a common procedure that is used to restore the device's IMEI number if it has been lost or corrupted. This procedure can be done using a variety of tools and methods, but the most common method is to use the DTpro team's Qualcomm module.

Step 1: Preparation​

In this step, we will write the Bootloaderimage file of the Model to be repaired.

  • Run Qualcomm Module
1700200444736.png​
  • In Brand Option: Select Huawei
1700200466062.png​
  • In Xboot: Select your Model
  • InType Option: Select Encrypted!
  • Once this Configuration is done in Our Qualcomm Module!! We can start with the Work...
  • Now press - Select DT-File... Option
  • Select “Bootloaderimage” of your Model...
  • Bootloaderimage File – loaded Correctly
  • Please Connect your Device in Qualcomm Mode [EDL]
  • Press the Write button!
  • To write a loaded BootloaderImage file

DTPro Tool Download Link:- Here
If you find my post helpful, press like button✌​
 
.::Greed::.

.::Greed::.

Friend's Martview
Jun 10, 2019
1,416
1,001

Step 2: Write IMEI's​


In this step, we will write the new IMEIs to the device.
  • Wait for the phone to turn on.
  • Put the phone in manufacturing mode. On the dial pad, type ##2846579##, select “Project Menu”, “Background settings”, “USB ports settings”, and “Manufacture mode”. Then connect it to the PC and install drivers ( If you do not have a separate driver pack for your device, install HiSuite and Honor Suite software ).
  • Drivers Installed
  • On Qualcomm Devices we perform the Service by Selecting the port: DBAdapter Reserved
  • Select the DBAdapter Reserved Interface port in the Qualcomm Module
  • Press Special Task, Select Option
  • IMEI Repair...
  • Now it will show us the Option to enter the IMEI's

  • Input the IMEI's Press Ok!... and Wait Operation Finish... IMEI's repair Successful

Note: On the following devices, it is required to perform the “Repair Network” operation after writing the new IMEI.
  • Huawei Nova 9 SE
  • Huawei Nova Y90
  • Huawei Nova Y91
  • Honor X7
  • honor 50 lite
This Operation must be performed due to Device Security or Firmware version

Repair Network Below​

  • Repair Network! Select your Model in the list Option to “repair Network”
  • Once Select your Model, press the “Repair Network” Button
  • Wait for the Operation to finish
  • Restart our Devices and we are Done!!!


Note: Some Devices Require a Factory Reset after repair!

Conclusion: IMEI repair on Huawei or Honor devices with Qualcomm processors is a relatively simple procedure that can be done using a variety of tools and methods. The most common method is to use the DTpro team's Qualcomm module. This module is easy to use and provides a step-by-step guide for the repair process.

Credits: DTpro Tool is created and distributed by the developer, and full credit goes to the developer ( DTpro ) and that person who gave this useful method For Imei Repair.
If you find my post helpful, press like button✌​
 
  • Like
  • Love
Reactions: Tech Tips Sonu, Sizwe30, rhinfo1983 and 2 others
You must log in or register to reply here.
Top