Legitunlocks.com
Wide Range LCD collection

DTPro Honor X6A WDY-LX2 IMEI repair done with DTPro eMMC tool

DTPro Tool
A

awexss

Active Member
Apr 17, 2017
17
6
Indonesia
1. Do ISP pin out. You can use another tool you like too. My case I used eazy jtag.
2. Read nvram nvdata.
3. Load nvdata and nvram file to DTPro eMMC tool.
4. read IMEI by DTPro eMMC Tool.
5. replace the IMEI with your new one
6. This will overwrite nvdata and nvram files
7. final step. overwrite the nvram nvata files on phone. all done

dtpro post.JPG


WhatsApp Image 2024-12-18 at 15.01.22.jpeg
 
  • Like
Reactions: FAROK, Ahmed_Dooha and waqaskhanzada786
cot256Ton

cot256Ton

Junior Member
Dec 21, 2024
1
0
south africa
IMEI repair on devices like the Honor X6A (WDY-LX2) often involves specialized tools such as DTPro eMMC Tool, which is capable of handling eMMC-related repairs. This process typically involves the following steps:


1. Preparation​


  • Tools and Software: Ensure you have DTPro eMMC Tool installed on your computer and that you have all necessary drivers (e.g., USB and Qualcomm or MediaTek drivers) installed.
  • Backup Data: Make a complete backup of the device to prevent data loss.
  • Device Access: Open the device if needed to access the eMMC directly, which is often required for low-level operations.

2. Connect the Device​


  • Use the appropriate cables or adapters to connect the device's eMMC to your computer.
  • Boot the device into the required mode, which could be Download Mode, Test Point Mode, or Direct eMMC access depending on the tool and the issue.

3. IMEI Repair Procedure​


  • Load Firmware or Database: If the tool requires a specific database file or firmware, load it.
  • Read Information: Read the current state of the eMMC to confirm connectivity and identify existing data.
  • Write IMEI: Enter the correct IMEI numbers as per the device's labels or original box. Be sure to follow legal guidelines regarding IMEI writing, as unauthorized changes can violate laws in many regions.
  • Rebuild Partition (if needed): If the IMEI section of the NV data or partition is corrupt, the tool might allow rebuilding or repairing it.

4. Verification​


  • Disconnect the device and restart it.
  • Check the IMEI status by dialing *#06# or by navigating to the device settings.
  • Ensure the device functions properly with network connectivity and no issues arise.

5. Finalize​


  • Reassemble the device if you had to disassemble it.
  • Perform final tests to confirm the repair's success.

Notes:​


  • Legal Compliance: Always ensure that you are authorized to perform IMEI repairs. Unauthorized IMEI changes are illegal in many countries.
  • Risk: This process may void the warranty or damage the device if not done correctly. Proceed with caution.
  • Tools Knowledge: Familiarize yourself with DTPro eMMC Tool or any equivalent software, as incorrect usage can corrupt device data.

Would you like more specific guidance for any of these steps?
 
A

awexss

Active Member
Apr 17, 2017
17
6
Indonesia
cot256Ton said:
IMEI repair on devices like the Honor X6A (WDY-LX2) often involves specialized tools such as DTPro eMMC Tool, which is capable of handling eMMC-related repairs. This process typically involves the following steps:


1. Preparation​


  • Tools and Software: Ensure you have DTPro eMMC Tool installed on your computer and that you have all necessary drivers (e.g., USB and Qualcomm or MediaTek drivers) installed.
  • Backup Data: Make a complete backup of the device to prevent data loss.
  • Device Access: Open the device if needed to access the eMMC directly, which is often required for low-level operations.

2. Connect the Device​


  • Use the appropriate cables or adapters to connect the device's eMMC to your computer.
  • Boot the device into the required mode, which could be Download Mode, Test Point Mode, or Direct eMMC access depending on the tool and the issue.

3. IMEI Repair Procedure​


  • Load Firmware or Database: If the tool requires a specific database file or firmware, load it.
  • Read Information: Read the current state of the eMMC to confirm connectivity and identify existing data.
  • Write IMEI: Enter the correct IMEI numbers as per the device's labels or original box. Be sure to follow legal guidelines regarding IMEI writing, as unauthorized changes can violate laws in many regions.
  • Rebuild Partition (if needed): If the IMEI section of the NV data or partition is corrupt, the tool might allow rebuilding or repairing it.

4. Verification​


  • Disconnect the device and restart it.
  • Check the IMEI status by dialing *#06# or by navigating to the device settings.
  • Ensure the device functions properly with network connectivity and no issues arise.

5. Finalize​


  • Reassemble the device if you had to disassemble it.
  • Perform final tests to confirm the repair's success.

Notes:​


  • Legal Compliance: Always ensure that you are authorized to perform IMEI repairs. Unauthorized IMEI changes are illegal in many countries.
  • Risk: This process may void the warranty or damage the device if not done correctly. Proceed with caution.
  • Tools Knowledge: Familiarize yourself with DTPro eMMC Tool or any equivalent software, as incorrect usage can corrupt device data.

Would you like more specific guidance for any of these steps?
Click to expand...
What do you mean bro? the tool works perfectly for me.
 
  • Like
Reactions: DTPRO Tool
You must log in or register to reply here.
Top