UMT help me umt team

[dipok]

REALME RMX 1825 pin unlock not Success

Brand : Oppo
Model : Realme C3 (RMX2020)
Operation : Format FS
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3
Port Name: MediaTek USB Port_V1633 (COM3)
Path: \\?\usb#vid_0e8d&pid_0003#6&265d47d&0&5#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0788, [MT6771]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM3)
Connect BROM failed: STATUS_SCATTER_HW_CHIP_ID_MISMATCH(-1073545201)
Disconnect cable and Power ON phone.
Please check if correct Platform/DA is selected
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.0]

 

[akeel2000]

REALME RMX 1825 pin unlock not Success

Brand : Oppo
Model : Realme C3 (RMX2020)
Operation : Format FS
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3
Port Name: MediaTek USB Port_V1633 (COM3)
Path: \\?\usb#vid_0e8d&pid_0003#6&265d47d&0&5#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0788, [MT6771]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM3)
Connect BROM failed: STATUS_SCATTER_HW_CHIP_ID_MISMATCH(-1073545201)
Disconnect cable and Power ON phone.
Please check if correct Platform/DA is selected
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.0]

use meta mode

 

[akeel2000]

use meta mode

Brand : Oppo
Model : Realme 3 (RMX1821)
Operation : Format FS
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM9
Port Name: MediaTek USB Port (COM9)
Path: \\?\usb#vid_0e8d&pid_0003#6&df2ee03&0&2#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0788, [MT6771]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port (COM9)
Connected to BROM.
Sending Download Agent...
connect DA end stage: 2, enable DRAM in 1st DA: 0
Connected to Download Agent..
Syncing with Target...
Reading Partition Table...
Storage : eMMC
Reading Device Information...
Unable to read!
Userdata is NOT ENCRYPTED
Formatting userdata...
- Done.
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 3.9]

 

[kuldeepsharma30]

REALME RMX 1825 pin unlock not Success

Brand : Oppo
Model : Realme C3 (RMX2020)
Operation : Format FS
Connection Mode : BROM (Hold Key for BROM Mode)
Hold VOL UP + DOWN and connect USB Cable.
Some phone may have different key combination for BROM mode.
Waiting for device in BROM mode...
Port: COM3
Port Name: MediaTek USB Port_V1633 (COM3)
Path: \\?\usb#vid_0e8d&pid_0003#6&265d47d&0&5#{86e0d1e0-8089-11d0-9ce4-08003e301f73}
Chipset: 0x0788, [MT6771]
Hardware Info: 0x8A00, 0xCA00, 0x00
SecureBoot: True
SLA: False
DA Auth: True
Disabling WatchDog...
- Success
Sending Payload data...
- Payload sent
Initiating Control Transfer...
- Done
Waiting for result...
- Result: 0xA1A2A3A4
Disable Auth Success
Waiting for Phone in Flash Mode...
Connect Power Off phone within 30 secs...
Port : MediaTek USB Port_V1633 (COM3)
Connect BROM failed: STATUS_SCATTER_HW_CHIP_ID_MISMATCH(-1073545201)
Disconnect cable and Power ON phone.
Please check if correct Platform/DA is selected
Disconnect Battery/Cable and Power On Phone.
[UltimateMTK Ver. 4.0]

Now Done Or Not ?
Your Device Not Done
Then Come Skype
Username [email protected]
Support Free [emoji16][emoji685]

Sent From RMX1911 Using Martview Forum App