Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-1902
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0x80A7CEC6
Manufacturing date: ظٹظ†ط§ظٹط± 2003
CID: 15010051 4436334D 420380A7 CEC616E6
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.255 (MMC )
Partition info:
Boot1: 32640 KiB (enhanced)
Boot2: 32640 KiB (enhanced)
RPMB: 32640 KiB (enhanced)
User area: -512 bytes(2,197,796,421,632 bytes) (enhanced)
GP1: 255.50 MiB (enhanced)
GP2: 255.50 MiB (enhanced)
GP3: 255.50 MiB (enhanced)
GP4: 255.50 MiB (enhanced)
Hardware reset function: 255
Partition configuration: 0xFF
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0xFF
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0xFF
Change of boot configuration register bits relating boot mode operation is permanently disabled.
Boot bus conditions: 0xFF
reserved, boot mode: reserved, retain bus width and boot mode
Boot area write protection: 0xFF
Power-on write protection: not possible
Permanent write protection: not possible
Lock status: locked until next power on
User area write protection: 0xFF
Password protection features: disabled
Power-on write protection: not possible
Permanent write protection: not possible
Lock status: locked until next power on
Invalid sector count.
Failed to switch partition to 0, error code: 37
CMD8 error, cmd response: 0x900, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Try to decrease the clock speed ---
Detected: SAMSUNG moviNAND KMQD60003M-BXXX/
___
why problem>>>>?
Interface: UFI High-Speed
Serial number: 0011-8842-1902
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0x80A7CEC6
Manufacturing date: ظٹظ†ط§ظٹط± 2003
CID: 15010051 4436334D 420380A7 CEC616E6
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.255 (MMC )
Partition info:
Boot1: 32640 KiB (enhanced)
Boot2: 32640 KiB (enhanced)
RPMB: 32640 KiB (enhanced)
User area: -512 bytes(2,197,796,421,632 bytes) (enhanced)
GP1: 255.50 MiB (enhanced)
GP2: 255.50 MiB (enhanced)
GP3: 255.50 MiB (enhanced)
GP4: 255.50 MiB (enhanced)
Hardware reset function: 255
Partition configuration: 0xFF
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0xFF
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0xFF
Change of boot configuration register bits relating boot mode operation is permanently disabled.
Boot bus conditions: 0xFF
reserved, boot mode: reserved, retain bus width and boot mode
Boot area write protection: 0xFF
Power-on write protection: not possible
Permanent write protection: not possible
Lock status: locked until next power on
User area write protection: 0xFF
Password protection features: disabled
Power-on write protection: not possible
Permanent write protection: not possible
Lock status: locked until next power on
Invalid sector count.
Failed to switch partition to 0, error code: 37
CMD8 error, cmd response: 0x900, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Try to decrease the clock speed ---
Detected: SAMSUNG moviNAND KMQD60003M-BXXX/
___
why problem>>>>?
