Load: C:\Users\Dzgsm Team \Desktop\Dzgsm Team\MT6737T_Android_scatter.txt
Patch Level: MMB29T
Display ID: MMB29T.G532FXWU1ASB1
SW Version: G532FXWU1ASB1
Ver. CodeName: REL
Ver. Release: 6.0.1
Sec. Patch: 2018-08-01
Build Time: 11/02/2019 6:57:19 AM
Product Model: SM-G532F
Product Brand: samsung
Product Name: grandpplteser
Product Device: grandpplte
Product Board: MT6737T
CPU: armeabi-v7a,armeabi
Product Manfct: samsung
Board Platform: mt6737t
Product Info: grandpplte
SW: grandpplteser-user 6.0.1 MMB29T G532FXWU1ASB1 release-keys
Firmware ID: MT6737T_samsung_SM-G532F_OSv6.0.1_MMB29T.G532FXWU1ASB1_MMB29T_grandpplte
Verify firmware [New folder]...
Verify firmware [MT6737T_samsung_SM-G532F_OSv6.0.1_MMB29T.G532FXWU1ASB1_MMB29T_grandpplte]...
Exist
Preloader [HW DEV]:
EMI: MT6752 preloader_grandpplte.bin with 4 memory type(s)
1. eMMC DDR3 ID: 150100514E31364D42 Ven: Samsung | Dev: QN16MB RAM: 1.50 Gb
2. eMMC DDR3 ID: 90014A483847347592 Ven: Hynix | Dev: H8G4u? RAM: 1.50 Gb
3. eMMC DDR3 ID: 150100464E31324D42 Ven: Samsung | Dev: FN12MB RAM: 1.00 Gb
4. eMMC DDR3 ID: 150100514E31364242 Ven: Samsung | Dev: QN16BB RAM: 1.50 Gb
Operation: Write Flash [ v2.47a1 ]
Platform: FireFly SmartPhone - MT6580/67:35|39|52|53|61|65|68|71
Wait...
[-]
[-]
[-]
[-]
[-]
[-]
[+] Update PMT [re-Part]
[-] Checksum Verify
[-] Safe Erase [Upgrade]
[-] Check compatibility
[-] Backup
[-] FLASH ERASE
Files: 8
[FL]: C:\Users\2023\Desktop\New folder (8)\New folder\New folder\
preloader_grandpplte.bin [ 162.55 Kb ]
cm2pit.bin [ 4.66 Kb ]
lk.bin [ 576.50 Kb ]
efuse.img [ 768 B ]
tz.img [ 316.75 Kb ]
param.img [ 730.00 Kb ]
recovery.img [ 11.03 Mb ]
boot.img [ 9.51 Mb ]
Total size: 0x01649EFC [ 22.29 Mb ]
Patch Level: MMB29T
Display ID: MMB29T.G532FXWU1ASB1
SW Version: G532FXWU1ASB1
Ver. CodeName: REL
Ver. Release: 6.0.1
Sec. Patch: 2018-08-01
Build Time: 11/02/2019 6:57:19 AM
Product Model: SM-G532F
Product Brand: samsung
Product Name: grandpplteser
Product Device: grandpplte
Product Board: MT6737T
CPU: armeabi-v7a,armeabi
Product Manfct: samsung
Board Platform: mt6737t
Product Info: grandpplte
SW: grandpplteser-user 6.0.1 MMB29T G532FXWU1ASB1 release-keys
Firmware ID: MT6737T_samsung_SM-G532F_OSv6.0.1_MMB29T.G532FXWU1ASB1_MMB29T_grandpplte
Verify firmware [New folder]...
Verify firmware [MT6737T_samsung_SM-G532F_OSv6.0.1_MMB29T.G532FXWU1ASB1_MMB29T_grandpplte]...
Exist
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port (COM5)
MODE [0]: BOOTROM; PORT: 5
Waiting for BOOT ACK...
BROM: Skip ACK verication
BROM: Init... Ok
CHIP: MT6735 SBID: 0x8A00 HWVR: 0xCC00 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0321
TYPE: LEGACY [MTK]
MEID: 406B38B781E8E6D8F8984F995F54BE03
BROM: Sec Level: 0x00000005 Mode: SBC+SDA
VER: 0x05 BL: 0xFE [BOOTROM]
FireFly: Init
FireFly: Start Auth Ok
FireFly: Continue Auth Ok
FireFly: Start Ok
FireFly: Init Core Ok
FireFly: Running: v06.05.06 on MT6735
eMMC init passed
File exist, skip: C:\InfinityBox\CM2MT2\backup\ext_csd\MT6735__Hynix_H8G4u_5.0_extcsd_03082023.bin
EMMC CID: 90014A483847347592013B8A4EB5A547
VEN: Hynix OEM: 330 ID: 483847347592 [H8G4u?] PRV: 0x01
SNN: 998919861 [0x3B8A4EB5]
MM/YY: 10/2018
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
USER: 0x1D2000000 [ 7.28 Gb ]
CSD: D02701320F5903FFFFFFFFE78A40002B
TEMP_WRITE_PROTECT: Off
PERM_WRITE_PROTECT: Off
EXTCSD: rev1.7 eMMC 5.0
[CONFIG]: 0x48 0x00 0x01
[PARTITION_CONFIG]: 0x48
[BOOT_BUS_WIDTH]: 0x00
[RST_N_FUNCTION]: 0x01
[PART_S_COMPLETED]: Off
[SIZE]: Market: 8 GB
[SIZE]: Actual: 0x1D2000000 [ 7.28 GB ]
EXTCSD: [EOL]: EOL status : Urgent (More than 90% reserved blocks used)
[EOL_A]: SLC status : 0% - 10% used
[EOL_B]: MLC status : 60% - 70% used
USB: HIGH-SPEED
Boot done FireFly
Analyze PMT...
Loaded 0x8000 bytes
Analyze PMT...
Loaded 0x4200 bytes
Verify device config...
Ok
Loaders Ok
Verify PMT... Ok
Verify SEC DL...
RePartition...
RePartition: Ok
Analyze PMT...
Loaded 0x8000 bytes
Analyze PMT...
Loaded 0x4200 bytes
Flash write...
Write: PRELOADER [ 162.55 Kb ]
Bootloader code area 0 prepare Ok
Bootloader code area 0 updated Ok
Write: PGPT [ 4.66 Kb ] Ok
Write: LK [ 576.50 Kb ] Ok
Write: EFUSE [ 768 B ] Ok
Write: TEE1 [ 316.75 Kb ] Ok
Write: PARAM [ 730.00 Kb ] Ok
Write: RECOVERY [ 11.03 Mb ] Ok
Write: BOOT [ 9.51 Mb ] Ok
RePartition...
RePartition: Ok
Flashing finished
Done: 00:00:52
Reconnect Power/Cable now
