EASYJTAG_RELEASE V3.7.0.24 || New Setup ||

[mtipune695]

EASYJTAG_RELEASE V3.7.0.24​

POSTED ON JUN 27, 2021

Fixed msvcp140.dll missing error
Added posibility to force eMMC Firmware Dump from NAND or RAM
Added KLMAG2WEPD_Rev00
Added KLMBG2JETD-B041_BJTD4R_Rev9
Added KLMCG2KETM-B041_CKTM4R
Added KLMCG2KETM-B041_CKTM4R_V1
Added KLMCG2KETM-B041_CKTM4R_V2
Added KLMCG2KETM-B041_CKTM4R_V3
Added KLMCG2KETM-B041_CKTM4R_V7
Added KMDP6001DA-B425_DP6DAB_Rev1.bin
Updated KMDP6001DA-B425_DP6DAB.bin
Added KMDX60018M-B425_DX68MB
Added KMDX60018M-B425_DX68MB
Added KMF310012M-B305_F312MB_Rev06
Added KMFNX0012M-B214_FNX2MB_Rev1
Updated [email protected]
Added KMQ820013M-B419_Q823MB
Added KMQD60013M-B318_QD63MB



Download Link :

EasyJtag_Release_v3.7.0.24.exe

 

[c_ahmad79]

hi
i am not able to reset oppo ufs chip with this update
here is log

Description: EasyJTAG UFS Socket BGA-254 by EasyJTAG 20.08.20

Identify UFS Chip.
UFS Chip Voltage: Low

Check ISP connect.
Calibrate ISP.
VCC: 3306mV
VCCQ2: 1921mV

Chip Info:
Manufacturer: MICRON
ProductName: MT064GASAO2U21
SerialNumber: 0x08667D3801020C111900
OemID: MICRON
Firmware Version: 1.09
UFS Version: 2.1

Maximum Number of LUs: 32
Number of LUs found: 6
LUN 0:
Block size: 0x1000
Size: 0xE41800000 / 57,024,000,000B / 57GB
LUN 1 (Boot A):
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
LUN 2 (Boot B):
Block size: 0x1000
Size: 0x800000 / 0,008,000,000B / 8MB
LUN 3:
Block size: 0x1000
Size: 0x2000000 / 0,032,000,000B / 32MB
LUN 4:
Block size: 0x1000
Size: 0x84800000 / 2,072,000,000B / 2GB
LUN 5:
Block size: 0x1000
Size: 0x1C000000 / 0,448,000,000B / 448MB
Number of W-LUs found: 1
W-LUN 0xC4 (RPMB):
Block size: 0x100
Size: 0x1000000 / 0,016,000,000B / 16MB
Full size: 0xEE7000000 / 59,624,000,000B / 59GB

RPMB:
Counter: 13666

Health:
Device life time method A: 0x01 (0%-10% device life time used)
Device life time method B: 0x01 (0%-10% device life time used)
Pre End of Life: 0x01 (Used less then 80% of reserved blocks)

Can't stop LU, Code: -406, Reason: UAP SCSI: Command sense: UNIT_ATTENTION
Done.

how to solve this..?
Regards

 

[Unlockmobile_007]

solution plz.... first time install esay jtag clasic tool open but after close the tool second time error show 0xc0000005 ...