ChargerLAB Power-Z KM002C USB PD3.1 Type-C Tester
Martview
Features:
Plug and Play
Upgrade PD3.1 protocol, support up to 240W power test, test range 50V/6A
Added functions such as Super-VOOC, VIFC, and QC5 to detect and deceive.
Larger ROM space, more expansion capabilities, M4 chip blessing, faster processing capabilities, high-level
The machine has a PD packet capture function
The main page displays the voltage, current, and power in order from top to bottom, and the lower-left corner displays the charging protocol that may be in use
The display page can switch 4sps, 15sps, 60sps, and 1Ksps refresh rate
It can display the working curve of voltage and current during charging; the working waveforms of D+ and D- and CC1 and CC2
Support fast charging protocol detection, currently supported protocols include: FCP, SCP, AFC, QC3.0, QC4+, QC5, PD3.1, PD3.0, PPS, Apple2.4A, VOOC, SVOOC, VIFC, UFCS, etc. charging agreement
Data cable wire detection, by reading the information of the E-marker chip inside the wire, the power and transmission performance supported by the wire can be obtained.
Apple charger SN code reading
Offline recording of charging data, you can use a single machine to record the data changes of the device during charging, and store it in the form of data, users can call and review on the host computer, and export charts
Support the host computer, the host computer is a very powerful function extended to the PC side, including data reading, recording, and exporting functions, as well as protocol decoy voltage regulation, PD protocol analysis, upgrade tester firmware, and other functions. Supports multi-camera simultaneous operation, in principle, there is no limit on the number. At present, the host computer only supports WIN10 and WIN11 system versions
Specification:
Model: KM002C
Dimensions 36*37*8mm
Screen size: 1.3 inches
Screen material: IPS
Screen resolution: 240×240 pixels
Language: English/Chinese
Test interface type: Type-C
Number of test ports: 2C port
Operation type: Button
Independent power supply, computer communication port: Type-C (5V) Name: HID
Processor: ARM Cortex-M4 192MHz
Shell material: CNC aluminum shell
PD3.1: Support
Withstand voltage range: 0-50V
Apple charger SN code reading: Support
ADC: 20 Bits
Interface internal resistance: About 28mΩ
Typical working current: 8~25mA
Voltage accuracy: 0.00002V
Current accuracy: 0.000003A
Voltage range: 0-50V
Current range: 0~6A
Number of offline recording groups: 4MB of built-in storage
Maximum number of sets of capacity energy: 50
Application:
Mobile phone charging power monitoring
Mobile power input and output test
Charger multi-specification fast charging protocol test
PD protocol device test
QI wireless charging power test
Voltage and current curve recording, etc. should be used in places
How to use:
Insert the Type-C port of the Power-Z into the charging port of the mobile phone
Insert the original charger into the C port at the bottom of the Power-Z
Turn on the power to start using, easily monitor charging voltage, current, power, and other data
Key Description(top to bottom):
Button 1: Return, the main interface adjusts the text display direction
Button 2: OK, the main interface adjusts the data refresh frequency
Button 3: Previous page, the cursor moves up
Button 4: Next page, cursor down
Package includes:
1 x USB tester
Martview
Features:
Plug and Play
Upgrade PD3.1 protocol, support up to 240W power test, test range 50V/6A
Added functions such as Super-VOOC, VIFC, and QC5 to detect and deceive.
Larger ROM space, more expansion capabilities, M4 chip blessing, faster processing capabilities, high-level
The machine has a PD packet capture function
The main page displays the voltage, current, and power in order from top to bottom, and the lower-left corner displays the charging protocol that may be in use
The display page can switch 4sps, 15sps, 60sps, and 1Ksps refresh rate
It can display the working curve of voltage and current during charging; the working waveforms of D+ and D- and CC1 and CC2
Support fast charging protocol detection, currently supported protocols include: FCP, SCP, AFC, QC3.0, QC4+, QC5, PD3.1, PD3.0, PPS, Apple2.4A, VOOC, SVOOC, VIFC, UFCS, etc. charging agreement
Data cable wire detection, by reading the information of the E-marker chip inside the wire, the power and transmission performance supported by the wire can be obtained.
Apple charger SN code reading
Offline recording of charging data, you can use a single machine to record the data changes of the device during charging, and store it in the form of data, users can call and review on the host computer, and export charts
Support the host computer, the host computer is a very powerful function extended to the PC side, including data reading, recording, and exporting functions, as well as protocol decoy voltage regulation, PD protocol analysis, upgrade tester firmware, and other functions. Supports multi-camera simultaneous operation, in principle, there is no limit on the number. At present, the host computer only supports WIN10 and WIN11 system versions
Specification:
Model: KM002C
Dimensions 36*37*8mm
Screen size: 1.3 inches
Screen material: IPS
Screen resolution: 240×240 pixels
Language: English/Chinese
Test interface type: Type-C
Number of test ports: 2C port
Operation type: Button
Independent power supply, computer communication port: Type-C (5V) Name: HID
Processor: ARM Cortex-M4 192MHz
Shell material: CNC aluminum shell
PD3.1: Support
Withstand voltage range: 0-50V
Apple charger SN code reading: Support
ADC: 20 Bits
Interface internal resistance: About 28mΩ
Typical working current: 8~25mA
Voltage accuracy: 0.00002V
Current accuracy: 0.000003A
Voltage range: 0-50V
Current range: 0~6A
Number of offline recording groups: 4MB of built-in storage
Maximum number of sets of capacity energy: 50
Application:
Mobile phone charging power monitoring
Mobile power input and output test
Charger multi-specification fast charging protocol test
PD protocol device test
QI wireless charging power test
Voltage and current curve recording, etc. should be used in places
How to use:
Insert the Type-C port of the Power-Z into the charging port of the mobile phone
Insert the original charger into the C port at the bottom of the Power-Z
Turn on the power to start using, easily monitor charging voltage, current, power, and other data
Key Description(top to bottom):
Button 1: Return, the main interface adjusts the text display direction
Button 2: OK, the main interface adjusts the data refresh frequency
Button 3: Previous page, the cursor moves up
Button 4: Next page, cursor down
Package includes:
1 x USB tester